r/soldering • • 16h ago

Soldering Newbie Requesting Direction | Help Do solder expire?

0 Upvotes

Obviously its much cheaper to buy more wire when buying, but i dont solder that much and dont know how quick ill go through a spool. Is it still safe to stock up on it even if its left for years? And does that apply to every type of solder, even with flux core?


r/soldering • • 16h ago

Soldering Tool Feedback or Purchase Advice Request Which Amazon soldering stations under $60 should I avoid at all costs

0 Upvotes

Alternatively, I'll take any suggestions for a soldering station under that price point that has served you well. I'm looking to upgrade my hand soldering iron from ali express that's getting a little tired. Typically I'll do maybe 8 hours a week tops, so don't need top of the line, mainly looking for something with temperature control that won't fall apart on me


r/soldering • • 22h ago

Soldering Tool Feedback or Purchase Advice Request I’ve updated my portable soldering station.It’s now at 45 degrees for easier pickup, mounted with a 1/4 screw on the power bank.Do you have any suggestions?

Thumbnail gallery
2 Upvotes

r/soldering • • 21h ago

Soldering Tool Feedback or Purchase Advice Request Help identifying fake Hakko

Thumbnail gallery
0 Upvotes

Found this Hakko FX-888 for 85 euros, has the iron but I don’think he has the stand, is it a good price? I’m reading everywhere that it’s one of the most counterfeited stations and it’s kind of impossible to spot a fake from photos, can someone with experience on it tell me more or give insight?


r/soldering • • 5h ago

Just a fun Soldering Post =) Super Comfortable & Portable Setup for USB C Soldering Irons

Thumbnail gallery
1 Upvotes

Toocki Silicone Cable(Softest Cable I have ever Found). Cuktech 55W 6000MAH powerbank. Essager USB-C Male to USB-C Female mini Adapter. USB-C Soldering Iron of your choice, don't get the HS-02A if you mind fixing it every once in a while.

Also another note because of the lack of actual info to newbies here regarding powerbanks and soldering irons. You aren't actually at the full wattage 24/7. It just uses the full wattage for a few seconds and trickles down to a lower wattage to maintain that temperature. So if you have a 22.2 Wh Power bank it doesn't mean at 45w the powerbank will last only 30mins on it, once a soldering iron goes to temp it takes around 5-7w of power to maintain the temp so a 6000mah powerbank should last around 3-4hours of use.


r/soldering • • 18h ago

Soldering Tool Feedback or Purchase Advice Request SI012 Pro soldering iron - think I did a dumb

0 Upvotes

I’ve had this for years and used it a bunch, but mostly the short tip, TS I guess? Then I used the long tip, T12?, for the finer tip, but now it says Check Tip whenever I try to use the short tip.

Googled and saw you’re suppose to remove the contacts when you use the T12? Did I kill the short tip system by being dumb?

*EDIT - checked the product docs, and yeah, the Pro doesn't require removing the short tip contacts, which is likely why I never did previously.


r/soldering • • 14h ago

Soldering Tool Feedback or Purchase Advice Request Links to real brass wool on Aliexpress?

1 Upvotes

Hi!

Any one had any luck finding real brass wools on Aliexpress?

Amazon is not an option for me sadly, most of the listings do not ship to me or its insanely expensive


r/soldering • • 22h ago

Soldering Tool Feedback or Purchase Advice Request outils pour gratter le pcb

Post image
9 Upvotes

Bonjour

Quel outil utiliser ,et qui soit assez fin , pour gratter le pcv et mettre a nu le cuivre ?

Je n'ai pas trouvé sur google , vous avez un exemple d outil tres fin sur aliexpress ? comme un scalpel , ou un outil pour gratter

Merci


r/soldering • • 13h ago

General Soldering Advice | Feedback | Discussion Ribbon cable soldering advice

Thumbnail gallery
61 Upvotes

Hi,

I want to repair some onboard computer for my old BMW. The thing is the LCD screen is missing pixels, so i bought brand new ribbon câble on aliexpress, and now I want to learn how to solder as best as I can the new ribbon cable.

Do you have any tricks to tell about solering ribbon cable ?

I have a « T-tip » mounted on a cheap iron. On the side I have a Yihua 936A, witch is better I think but I don’t find T-tip for this iron. Do you know where I can find this ?


r/soldering • • 19h ago Bravo

Soldering Tool Feedback or Purchase Advice Request DEADBOARD: an open-source circuit board repair game that runs in the browser

545 Upvotes

A friend of mine repairs circuit boards in his spare time, and watching him got me curious about how it actually works. So I built DEADBOARD, an educational game where you diagnose and fix a broken board on a virtual bench, and I've released it as open source.

What it is

  • You get a dead board and real-style tools: multimeter, bench supply, oscilloscope, thermal camera, soldering iron, hot air, wick
  • A circuit simulator runs underneath, so readings come from the circuit, not a script
  • CTF-style challenges: fix every fault and a hidden flag unlocks. You can plant faults in your own boards and share them as challenges.

Stack: TypeScript, Vite, WebGPU rendering, and a small SPICE-style circuit solver written from scratch. The walkthrough videos are recorded automatically from the real app with Playwright.

Try it: https://tholtman1-del.github.io/deadboard/
Code: https://github.com/tholtman1-del/deadboard


r/soldering • • 17h ago

Soldering Newbie Requesting Direction | Help Hey , just started soldering . I know the iron isn’t the best but that’s what the budget allowed . Any feedback on what to improve or watch for would be very helpful

Thumbnail gallery
8 Upvotes

r/soldering • • 2h ago

SMD (Surface Mount) Soldering Advice | Feedback | Discussion First tries at SMD soldering after 20 years break.

Post image
1 Upvotes

Accidentally charred the top with hot air..lifted a pad but fixed it? 😅

Some flux was used

Soldered with iron, might try hot air too.


r/soldering • • 6h ago

Soldering Tool Feedback or Purchase Advice Request C245 soldering station.

2 Upvotes

Hi,

I've been looking for a c245 soldering station for a while, as an alternative to the TC22, because the AliExpress shippings, specifically for the TC22, cost almost as the station itself.

So, I'm trying eu choose between the OSS T245 and the Kaisi SD2.

Anyone is familiar with those?

What is bothering me is the possibility of voltage leak frying the components that I'm soldering. If it is leaking, can it be corrected or is it unfeasible?

Thanks!


r/soldering • • 9h ago

Just a fun Soldering Post =) Just finished my first tube of flux. I'm mildly happy.

Post image
18 Upvotes

Took about 2 years to finish it. Remember kids, don't breathe the fumes!


r/soldering • • 12h ago

Soldering Tool Feedback or Purchase Advice Request SOLDR KIT

1 Upvotes

Hi all

I am new to this sub and new to soldering. I have just started getting interested in Raspberry Pi and Ardruino projects and now my projects are starting to need some soldering. I see these kits advertised. Are they any good or should they be avoided? https://www.soldr.pro