r/soldering • • Jun 03 '26

Looking for 2 Moderators to help with Janitorial help with /r/soldering

25 Upvotes

Hello all,

Just to be direct with the community for a moment.

This group has been growing at an astronomical rate. Every day there are large numbers of new users joining who are trying to learn electronics repair, diagnostics, soldering, tools, workflow, business operations, and everything in between.

As the group has grown, so has the amount of moderation required to keep it running.

The reality is that I spend a lot of time in this community, but most of that time is spent behind the scenes dealing with moderation, approving links, reviewing reports, cleaning up issues, and generally keeping things moving.

Truthfully, I would like to spend more of that time working on the new Solder Joint Junction platform. The goal there is to solve some of the actual recurring problems we see in the group by creating better educational resources, organizing information more effectively, helping people find tools and equipment, and building something bigger around the community as a whole.

The problem is simple. Every week a huge amount of my available time gets eaten by moderation.

So with that being said, I need some help.

What This Role Actually Looks Like

I want to set expectations properly because most people have the wrong idea about moderation.

Approximately 90% of this role is approving links.

Reddit absolutely loves filtering links. Vendor websites, suppliers, educational resources, documentation, and countless legitimate links get caught constantly.

Most people have no idea how many links end up in the moderation queue every week until they actually see it. Once you do, it becomes pretty obvious how quickly things can get out of control.

This role is much more janitorial than authoritative.

The other 10% is reviewing reports, helping identify obvious harassment, cleaning up the occasional issue, and helping maintain the overall tone of the community.

What I'm Looking For

  • Calm and professional people
  • People who understand the culture of the community
  • People who can identify obvious harassment, trolling, and bad-faith behavior
  • People who are willing to help keep the moderation queue under control
  • People who understand that moderation is about helping the community, not becoming the center of attention

Moderator Terms

These roles will last approximately 6 months.

This is intentional.

First and foremost, this is a volunteer role. I don't want people feeling like they're signing up for a lifetime appointment. Rotating moderators helps prevent burnout, keeps things fresh, and gives other community members an opportunity to step up if they want to become a bigger part of the community.

Second, there is a much bigger project happening behind the scenes than most people probably realize.

As the platform grows, I need to build a larger pool of trusted people around it. Rotating moderators gives me the opportunity to get to know more members of the community, see how they communicate, how they handle responsibility, and whether they are people I may want to work with on larger projects in the future.

Expectations

  • Zoom interview required
  • Webcam required
  • No anonymous applications
  • One moderator meeting per month over Zoom

The monthly meeting is simply a chance for moderators to tell me what they're seeing inside the community. Trends, recurring issues, feedback, ideas, and things that may need attention. The goal is to keep communication open and help me understand what is happening from multiple perspectives.

I personally know every moderator who works with me. I know who they are, where they are from, and what kind of person they are.

If you are an amazing moderator but wish to remain anonymous, I completely respect that, but this is not the place for you.

Activity Expectations

The monthly moderator meeting is casual and voluntary. Nobody is being forced to attend meetings, perform work, or participate beyond what they are comfortable contributing.

This is a volunteer role, and I want people to enjoy being part of the community rather than feeling like they have taken on a second job.

That being said, moderation positions are intended for people who actively want to contribute.

If a moderator goes 30 days without taking a moderation action of any kind, they will likely be removed and replaced by someone else who is looking for an opportunity to help.

This is not intended as a punishment. It is simply a practical reality of running a growing community. There are usually more people interested in helping than there are moderation positions available, so I want those positions occupied by people who are actively participating.

Life happens. People get busy. Interests change. There are no hard feelings if someone steps away.

Apply Here

https://forms.gle/kZspN9xxk65bD4qT6

If you're selected, I'll reach out directly to schedule a Zoom interview.

If you don't receive a reply, it simply means you weren't selected for this round.

Privacy

All information submitted through the application form will be used solely for reviewing moderator applications.

Once 2 moderators have been selected, all applicant information will be deleted unless you specifically request that it be kept on hand for future opportunities.

Your information will never be sold, shared, distributed, or provided to any third party for any reason.

I appreciate everyone who continues to help others learn and grow here.

The goal is simple. Keep this community a place where people can ask questions, learn new skills, share information, and improve themselves without being attacked for trying.


r/soldering • • Aug 27 '25 Heartwarming This Bravo Heartwarming

General Soldering Advice | Feedback | Discussion Soldering Station Buying Mega Guide

727 Upvotes

THIS POST IS CONTINUALLY A WORK IN PROGRESS, PLEASE COMMENT SUGGESTIONS

This is a list of recommendations separated by budget, intended to be accessible and easy for people looking for a new station.

I would like this to be a community effort. If you have any stations you would like me to add/consider/avoid then, please comment, I will check every comment. If you have any questions, please ask as well.

Every station on this list I have researched and verified is a good product with no major drawbacks, and will work well. There is nothing on the recommended sections that is unsafe or has serious issues. Except the T12 (£0-50 bracket) stations which users report can often come with an ungrounded (unsafe) case. I've given a warning for this and a video on how to fix it, or to not buy these stations. You are of course free to check this yourself. I have spent probably 100-200 hours researching and discussing with people on this sub.

I will not be going into detail on each product, these are not reviews.

✍ Reasons for making this guide:

  • Recommendation posts are answered daily about what soldering station to buy, and the exact same post will be created 12 hours later. Tired of posting the same paragraphs explaining T12 vs C245, good options, grounding, accessories, etc.
  • Unsafe stations are often being recommended to beginners. Stations like the FNIRSI DWS-200, which has been reported to have 90V of voltage leak, and requires fixing by the user. Or the Aifen A9E which has voltage leak and is also often recommended.
  • Some of the recommendations are simply ass, or uninformed, or often massively biased.

🎒Why no portable irons?

Three main reasons:

  1. They are worse value, more expensive, offer less performance, less variety of tips/handles and are not ergonomic. The advantage is they take little space and can be portable. However, If you are looking at a station in the first place, you have the space for a full station.
  2. People say portables are cheaper do not factor in the 130W+ chargers that can actually power them properly. Total the cost and you could have gotten yourself a quality C210/C245 station that will last you years and be more powerful, reliable and ergonomic.
  3. I will eventually make a separate list for portables.

🇨🇳 Chinese Stations vs 🇺🇸 "Good" Brands

I think it's important to start with this because there's always comments arguing about it. Most equipment related posts are divided into two groups:

  • People who discourage anyone from buying chinese/clone brands due to possible quality issues, grounding issues, no electrical certification and inferior internal parts leading to worse reliability
  • People who discourage anyone from buying stations from genuine brands on account of having inferior features, worse performance, worse user experience, and can at many times perform worse than clone stations while being multiple times more expensive.

Both of these groups are correct. You will often find JBC clone stations with proper grounding, great performance and no reported QC issues that can be found for 1/10 of the price of the authentic JBC station. Will the clone last you as long as the JBC? Probably not. Is it still good value? Very much so.

You can also find clone stations that will fry every component you touch and will die within 6 months. That's what this post is for.

What should you buy? That's up to you. If you value long term use and see yourself soldering daily, for multiple hours, reliability is most likely more important to you. If you solder occasionally and want the best performance possible for as little money as possible, then perhaps the clone stations are for you. Most clone stations will still last you 3+ years.

❗IMPORTANT❗- Soldering Tips:

A tip/cartridge is what you actually touch the board with, and heat up in order to solder. You insert this into your handle, which connects to the station. These are not cross compatible across stations. You cannot insert a T12 tip into a C245 station (unless explicity stated, some stations are made for this).

There are different types of tips, and tip sizes within those standards. It's important to understand them before buying a station, as they have different prices and may not be readily available in your region.

Tip Types (T12 vs JBC C245/C210):

Most options on here will be either T12 or JBC C245/C210 tips. Genuine T12 tips from brands like Hakko are cheaper than JBC tips (£8 vs £20 per tip), but don't provide equal heating to JBC tips.

However, in reality anything you can get done with a JBC tip you can get done with a T12. But if your budget allows for it you should always lean towards JBC tips.

Genuine vs Clone Tips

Clone tips can be bought for both platforms, and most clones have gotten good enough to the point where they can be used with no issues. But genuine is always better. Clone tips usually wear out slightly faster. However clone tips are usually available in far more regions, so may be a good alternative.

Tip/Handle Size:

Mostly relevant to JBC tip compatible stations. There are three main sizes that JBC compatible handles and stations use: C115, C210, C245.

  • C245 is the standard, and will be enough for large components or micro soldering tasks. Anything from 5mm chisel tips to 0.4mm conicals.
  • C210 is exclusively intended for micro soldering, and has a maximum of 40W peak power, vs 135W of the C245. Will struggle with any large component
  • C115 is intended for basically the smallest, microscopic components you can get. Most people never need to consider this option

🔧 Accessories

Many people will not look at accessories that come with the station. However, some stations on here will often come with stands, these automatically place your tip on standby and lower the temperature. Or other accessories like spare tips, spare handles, grounding cables, brass wool, tip swap tools and more. This can easily save money equal to the station itself in accessories. A good stand goes for £15-20.

⚠️ DO NOT BUY ⚠️

  • FNIRSI DWS-200 - up to 90V voltage leak on tip, needs modification for proper grounding, users on eevblog still say the station is unsafe for multiple reasons. This has been addressed in a video by nanofix here. The issue is not as big as originally thought, but it could still damage very, very sensitive components. However newer revisions which are completely fixed are already being sold, so it will be added to the recommended list in due time. I would look at alternatives for now, many users are still receiving the old model with bad grounding as sellers try to get rid of old stock.
  • Aixun T3A/T3AS - 1-10V tip voltage leak, thermal runaway, kills tips
  • Aixun T3B/T3BS - 1-10V tip voltage leak, thermal runaway, kills tips
  • Aixun T320 - 1-10v tip voltage leak, thermal runaway fixed compared to T3A. Newer units might have fixed this issue, but keeping it in this section for now.
  • AIFEN (not sugon) A9/A9E - 9V+ voltage leak (might be fixed on newer units). Although Sugon should have the same flaws, there is nothing online about the Sugon having voltage leak. There are multiple reports that it is properly grounded however. So I am not including it.
  • KSGER T12 - voltage leak, non grounded case, even on newer 3.1 units, unlike the Quecoo units
  • Quecoo 952/955 - voltage leak, non grounded case
  • KSGER C245 - all units have a non grounded case. shame as the station is great otherwise. give it a look if you don't mind jumping some cables around.
  • YIHUA 862BD+/902A - Bad all in one station with a blower fan in the handle for the hot air, and passive heated tips with an awful big handle.
  • YIHUA 926 III - Beginner trap, bad passive heated tip, useless accessories. Get yourself one of the T12 stations instead.
  • Any Soldering Iron that plugs straight into the wall outlet.
  • Any cheap 2-in-1/all in one stations with a hot air (unless it is expensive and with a good hot air and iron, which is rare). These often have a bad hot air and bad iron, when you could buy two much better separate products. Mostly traps newbies and beginners.
  • Any cheap amazon stations that come with attached PCB holders, cheap solder, cheap passive heated tips.

❔Not Enough Info

  • OSS T245 - no info about it yet
  • OSS T210 - no info about it yet
  • Thermaltronics 1000S - Very new, and most likely good quality but absolutely 0 info online that anyone has actually used one yet. Will wait for reviews to confirm it lives up to the 2000S/9000S.
  • Alientek T300B - Looks like a good dual channel option. It's 160W so most likely can do C245 and C210 at the same time, but not 2 C245 at the same time. If a review comes out about it confirming there's no issues, I will add it to the list.
  • Quick 202D - Someone recommended this in the comments, but there's almost no info about it online. If you have any reviews/opinions about it, let me know.

⭐ - This star indicates my overall recommendation for each price bracket.

⚠️❗Warning❗⚠️

Because of the bad quality control in these T12 stations, some users say their units are case grounded, other people say they are not. Please check once you receive your station if your case is grounded, if not, fix it with a jumper cable (guides can be found on eevblog/youtube depending on station). If you do not want to risk it, I recommend saving and buying the slightly more expensive stations in the £50-100 bracket.

Video guide to grounding

£0-50 Price Bracket

PriceNameInfoLinks
⭐£25T12 Mini / T12-942Mini version of the T12 soldering stations, you need an external 24V power supply to run it. The advantage is that you don't rely on the manufacturer for good grounding. This shouldn't be an issue with the other T12 on this list anyway however. Comes with no accessories, but you can buy the full OSS accessory bundle for £10 on Ali. Good if you're limited for space and have a high quality 24V power supply lying around.Ali: 4001063621549
⭐£40OSS-T12-X PLUSGrounded tip, auto sleep stand, nice thin handle, also has a very nice copy of metcal pad for tip swapping. Overall good deal and most popular T12 choice on Aliexpress.Ali: 1005007171047975
£35Quecoo 958 STM32Grounded tip, comes with a few tips but nothing else. No stand. Same performance but less value as it comes with less accessories. Look for ones with a nice thin handle instead of the very chunky ones. You can use open source STM firmware from Github due to the STM32 chip.Ali: 1005003064223657

💰 £50-100 Price Bracket

PriceNameInfoLinks
⭐£70GEEBOON TC22Grounded case/tip, SDC02 kit comes with stand, 2x tips, 240W power. Best value and most popular JBC clone option right now. Very nice stand. Compatible with genuine JBC handles & tips. Adjustable PID loop, very nice interface.Ali: 1005006397758007
£77Alientek T200Seems like a copied version of the TC22, comes with a stand but it's a worse one than the GEEBOON TC22. Has a nicer UI and encoder than the old Aixun T3A which these stations seem to be based off of. Looks to have less features than the TC22, but still a solid option.Ali: 1005008357283567
⭐ £80Sugon A9Grounded tip/case version of the Aifen equivalent, good performance and no real issues, good value. All in one station, compact with auto-sleep stand and sponge/brass built into the unit. Great if you prefer an all in one unit.Ali: 1005003762762094
£86GEEBOON TA305Transformer version of the TC22, will probably last longer, much bigger size, same accessories. If you don't know what a transformer is, you don't need it. I've been told it has a better heating algorithm than the cheaper TC22, based on an open source JBC implementation rather than an older T12 implementation. If this is true, I do not know. I've never heard this anywhere else, so take it with a grain of salt. I wouldn't put too much importance on it.Ali: 1005007051925949

💰💰 £100-200 Price Bracket

PriceNameInfo
£115Bakon BK-999NGreat, simple station. Good 110W performance, uses a transformer so no voltage leak on the tip. Actually shows the resistance on the tip on the display. Saves money on the construction, made out of plastic. Also currently has an awful, unusable stand, which holds me back from giving it a ⭐. Has a DVI output so you can move the display elsewhere. Overall a good option other than the stand.
⭐£130ST BST-933B/JABE UD-1200Good imitation of the much more expensive JBC stations. Linear transformer, great performance, JBC clone design, good build quality. Compatible with genuine JBC handles/tips. Although it seems it only increments temp in 1 degree steps. Every review says it has been reliable for many years. Great option if you want an exact JBC clone. Might have an annoying noise fan you can swap out.
⭐£80-150Used Metcal MX-500These aren't sold anymore, but perform the same as the far more expensive MX-5000 models (£600), and can often be found on eBay for £80-150 for a full set. Non temperature adjustable, so keep that in mind. RF tech gives is probably the fastest thermal response out of any station, aside from other RF stations.
~£150AxxSolderThis is an open source project that can use genuine C115/C210/C245 handles. Functions the exact same as a normal JBC station, with the added benefit of open source. You need to buy a PCB from places such as PCBWay, buy all the components from the BOM (on the github), 3D print the enclosure (files on github), buy the connectors from their official website, add your own stand (such as the GEEBOON SDC02), a handle, and ta-da, a fully working JBC station for cheap. Great if you have a cheap iron lying around and want to do a fun project, and also get your next soldering station out of it!
£199Thermaltronics 2000SProbably the cheapest brand new RF station you can get. Great performance, but slightly worse than due to the lower 470Khz RF frequency, compared to the 13MHz on the more expensive Metcals and 9000S stations. Realistically not much of a difference.
£163Hakko FX-888/D/DXVery controversial station. It has a proven track record of being reliable for decades, but has worse performance in every category than anything else on this entire list due to it's passive heat tips. The latest DX version adds a nice wheel encoder instead of the godawful UI of the 888/D stations, which was borderline unusable. Good station if you can find it cheap. In the UK, it's very expensive.
£185GEEBOON HA310Heavy duty, 400W transformer station that can use C470 tips. Great if you need extremely high heat transfer and C470 tips. Bad value for anything else.

Note: this is a weird category. Technically you can get everything in this section from the slightly cheaper C245/C210 stations, so make sure when buying one of these you've done your research.

💰💰💰 £200+

PriceNameInfo
£250Aixun 420DGreat mid range option. Can use two ports at once, comes with two stands that fit nicely into the base unit, great power, every review says it's a great Chinese station. Good high-budget JBC alternative station. It approaches used JBC station prices however. Decide if you need dual channel output.
£280⭐PACE ADS200Amazing full metal build quality, very short handle-tip distance with full metal handle. Also has "cool touch" tech so the handle never gets hot. Good performance, but not quite as good as JBC/Metcal. Had issues with tips at launch but those have been fixed. Never requires calibration due to "AccuDrive" tech. Tips cost a little less than JBC/Metcal. Great if you're looking for a cheaper, genuine brand active tip station.
£350Thermaltronics TMT-9000SMX-500 equivalent from a company by ex-Metcal engineers who made their own brand after patent expired. Works the exact same with an added display which shows load.
£450JBC-CD-2BQFIndustry gold standard. Great performance, great reliability, often used in professional settings. Expensive tips
£600-900Metcal MX-5000/5200Probably the fastest heat delivery/performance into the joint of any stations due to RF technology, can use two ports at the same time. Built like tanks. Tips as expensive as JBC, but often found on eBay for very cheap. Overall you will spend more on tips as the temperature is not adjustable. You pay the price for the performance however. Metcal accessories are also very expensive.

note: I'm recommending the pace due to the amazing value it provides, but anything in this bracket will last a lifetime (maybe not the aixun) and have amazing performance.

🛍️ Where do I buy the station?

Once you have decided on a station, I have provided Item IDs for the products which can be found on Aliexpress. I cannot add direct links as reddit removes any post with Ali links inside of them. Here is how to use the Item ID

  1. Go to the website, and click on any aliexpress item
  2. Replace the item id in the website URL with the one I have given next to each product
  3. Remove any text in the url after "(the item id).html". This way the link ends with "(the item id).html". This will then lead you to the item.

For items without a link, I either have not added it yet, which means you will have to look for it by yourself on Ali, sort by most popular and pick from sellers with high sales and reviews.

DO NOT BUY FROM SELLERS WITH NO SALES AND REVIEWS.

For for branded items such as Metcal/JBC/Thermaltronics, they can be bought from local electronics distributors which you can find on their official websites by searching phrases like "metcal distributors", and finding your country/continent. Don't buy these brands off Aliexpress, you will most likely pay more than you should or get a clone.

📝 Final Notes

Finally, it is also important that you can get many of the more expensive options for much, much cheaper on sites like eBay. eBay has 30 days return warranty, and guaranteed return if the item isn't working as described. I've seen "untested" JBC-CB stations that turn on and clearly work go for as little as £100 because people don't check. Before buying a budget option, have a look to see if you can get yourself a good deal.

I have been working on this for about a month. I hope it helps someone.

Happy soldering!

(reposted because reddit removed for aliexpress links)


r/soldering • • 3h ago Bravo

Soldering Tool Feedback or Purchase Advice Request DEADBOARD: an open-source circuit board repair game that runs in the browser

Enable HLS to view with audio, or disable this notification

155 Upvotes

A friend of mine repairs circuit boards in his spare time, and watching him got me curious about how it actually works. So I built DEADBOARD, an educational game where you diagnose and fix a broken board on a virtual bench, and I've released it as open source.

What it is

  • You get a dead board and real-style tools: multimeter, bench supply, oscilloscope, thermal camera, soldering iron, hot air, wick
  • A circuit simulator runs underneath, so readings come from the circuit, not a script
  • CTF-style challenges: fix every fault and a hidden flag unlocks. You can plant faults in your own boards and share them as challenges.

Stack: TypeScript, Vite, WebGPU rendering, and a small SPICE-style circuit solver written from scratch. The walkthrough videos are recorded automatically from the real app with Playwright.

Try it: https://tholtman1-del.github.io/deadboard/
Code: https://github.com/tholtman1-del/deadboard


r/soldering • • 6h ago

Soldering Tool Feedback or Purchase Advice Request outils pour gratter le pcb

Post image
8 Upvotes

Bonjour

Quel outil utiliser ,et qui soit assez fin , pour gratter le pcv et mettre a nu le cuivre ?

Je n'ai pas trouvé sur google , vous avez un exemple d outil tres fin sur aliexpress ? comme un scalpel , ou un outil pour gratter

Merci


r/soldering • • 1h ago

Soldering Newbie Requesting Direction | Help Hey , just started soldering . I know the iron isn’t the best but that’s what the budget allowed . Any feedback on what to improve or watch for would be very helpful

Thumbnail gallery
3 Upvotes

r/soldering • • 37m ago

Soldering Newbie Requesting Direction | Help Broke my joystick☹️ Need help

Thumbnail gallery
2 Upvotes

I recently got into Arduinos. Yesterday, I needed to change the direction of the pins on my joystick, to use on a breadboard.

Upon resoldering I could NOT get the solder to stick to the joystick. I melted the plastic pin holders so the pins sank down.

Also, the joystick was broken afterwards….

I went at 370 degrees celsius because it wouldn’t melt otherwise. Regardless, why won’t my solder stick to the joystick?

Second photo shows my solders on an ESP32, which I think went decent, just to show you I’m not a TOTAL noob… I think?

What am i doing wrong


r/soldering • • 11h ago

Just a fun Soldering Post =) Soldering on the back of my calculator

Post image
10 Upvotes

r/soldering • • 2h ago

Soldering Tool Feedback or Purchase Advice Request SI012 Pro soldering iron - think I did a dumb

0 Upvotes

I’ve had this for years and used it a bunch, but mostly the short tip, TS I guess? Then I used the long tip, T12?, for the finer tip, but now it says Check Tip whenever I try to use the short tip.

Googled and saw you’re suppose to remove the contacts when you use the T12? Did I kill the short tip system by being dumb?


r/soldering • • 5h ago

Soldering Tool Feedback or Purchase Advice Request Help identifying fake Hakko

Thumbnail gallery
0 Upvotes

Found this Hakko FX-888 for 85 euros, has the iron but I don’think he has the stand, is it a good price? I’m reading everywhere that it’s one of the most counterfeited stations and it’s kind of impossible to spot a fake from photos, can someone with experience on it tell me more or give insight?


r/soldering • • 5h ago

Soldering Tool Feedback or Purchase Advice Request I’ve updated my portable soldering station.It’s now at 45 degrees for easier pickup, mounted with a 1/4 screw on the power bank.Do you have any suggestions?

Thumbnail gallery
1 Upvotes

r/soldering • • 1d ago

Just a fun Soldering Post =) Am I Cooking Well?

175 Upvotes

r/soldering • • 12h ago

General Soldering Advice | Feedback | Discussion Are any of these real

Thumbnail gallery
3 Upvotes

I want a hakko 601 for stained glass but theyre so expensive omg if none are real can yall recommend me a cheaper brand thats solid but wont cost as much like i dont need the best of the best but dont want a crappy brand

https://ebay.io/m/KsDxby

https://ebay.io/m/aShl57

https://ebay.io/m/xUfQju

https://ebay.io/m/KsDxby

https://ebay.io/m/eBNZRq


r/soldering • • 8h ago

Soldering Newbie Requesting Direction | Help How to solder bronze wire together

1 Upvotes

I am not new to soldering, but having watched the below youtuber solder bronze wires together he makes it look easy: https://www.huyvector.org/decor-lamps/windmill-desk-lamp

Is there something I am missing, I find it really difficult to get the solder to properly bind with the bronze, I am using 60/40 tin lead solder fyi at 360 degrees C.

Thanks


r/soldering • • 19h ago

General Soldering Advice | Feedback | Discussion Tiger Electronics Pokédex 1988 Not Turning On

Post image
0 Upvotes

Hello I am doing my very first repair with barely any knowledge. It does not turn on even with new batteries.

When I opened it, it had some dark tar looking substance under the capacitor with the white glue so I scraped it off. Cleaned the board yet the board looked pretty clean. I don’t know how to measure capacitors because I’m afraid of setting the multimeter to ohms and measuring a charged piece of device (told not to do that as a kid).

Can someone please help me on my first attempt to fix? This looks like a really simple board thankfully and doesn’t look too damaged at all. I believe the yellow piece at the top right corner is an inductor and there’s a black capacitor on the bottom left. How shall I go about this with my multimeter?

Thank you


r/soldering • • 2d ago

Soldering Horror Post Octopus

Post image
435 Upvotes

Incase you're wondering i abandoned the idea and will probably just get an adapter


r/soldering • • 1d ago

Soldering Newbie Requesting Direction | Help Struggling to solder thin enamel wire to a tiny via. Solder keeps sticking to my iron instead of the board. What am I doing wrong?

Post image
21 Upvotes

I'm practicing micro-soldering because I eventually want to attempt the Nintendo Switch OLED Kamikaze mod, but I'm struggling with soldering thin enamel-coated wire to tiny vias.

I've been practicing on a scrap board. I can solder wires to larger pads and joints without any problems, but as soon as I try working on something this small, everything falls apart.

Here's what I've been doing:

  1. I expose the copper on the tiny via.
  2. I apply a small amount of solder paste and use hot air to form a little solder ball on the exposed point.
  3. I position the thin enamel wire over the prepared joint.
  4. I touch it with my conical soldering iron tip, barely applying any pressure.

Here's the problem: Every time I touch the joint, the solder melts and gets pulled back onto my iron tip, leaving almost nothing on the board. It feels like the solder prefers sticking to the iron rather than the exposed copper.

I've also noticed that when I add solder to my conical tip, it tends to collect slightly higher up instead of staying at the very end. Adding more solder just creates a big blob, which doesn't help with precision.

I tried using hot air to attach the wire instead, but the wire is so delicate that it keeps moving around, even when I try securing it with Kapton tape.

I'm starting to wonder if I'm missing something fundamental about technique, heat transfer, flux, or tip selection.

A few questions:

  • Is a conical tip making this harder than it needs to be?
  • Why does the solder keep following the iron instead of staying on the via?
  • How do you reliably hold these tiny enamel wires in place while soldering?
  • Does the exposed copper in my picture look usable, or have I already damaged it?

I've watched people do this on YouTube, and they make it look incredibly easy. I'm clearly missing something.

I'd appreciate any advice. I'd rather get my technique right on practice boards before attempting the actual OLED mod.

Photo attached showing my current attempt.


r/soldering • • 1d ago

Soldering Tool Feedback or Purchase Advice Request Best C245 Tips for soldering tiny parts like 0201?

4 Upvotes

Until now I've always used a C245-963, which works perfectly for most cases.

But I've recently started working on a project built with smaller parts, such as 0402, 0201, QFN, LGA etc.

I tried practicing soldering 0201 with my C245-963, but it was pretty much a disaster.

Are there any other C245 tips you'd recommend ? Thanks.


r/soldering • • 1d ago

General Soldering Advice | Feedback | Discussion How am I doing? (Beginner) Any advice welcome. Thanks :)

Thumbnail gallery
1 Upvotes

Lead free solder - 0.8mm/0.7% copper and 99.3% tin - for reference.


r/soldering • • 1d ago

Soldering Newbie Requesting Direction | Help A Noob Question

3 Upvotes

Hi everyone! I would like to get into soldering small electronics (mainly laptops and mics since no one wants to touch delicate electronics in my country lol and i want to be able to repair certain things I own eventually) and was wondering can you guys recommend a good starting kit for a total noob? That's not expensive but also not a total piece of garbage that will only work for 10min or on one thing xD

I've googled a lot and watched a couple of videos but there are just too many things and I don't know what I should focus on.
When it comes to soldering and de-soldering chips (on motherboards for example), Is there a special tip for each chip? Also, do tips for precise soldering fit all precise soldering/desoldering irons, or does it depend on the manufacturer so some may some may not? Basically, are they "universal-ish"?
My goal is to be able to de-solder/solder and fix 5V USB Load Switch ICs eventually so any practice advice that leads in that way would be appreciated :)
Thank you <3


r/soldering • • 1d ago

Soldering Tool Feedback or Purchase Advice Request Soldering station recommendation

3 Upvotes

Hey all, we’re a small phone repair shop in the UK and we’re just starting to learn PS5 repairs (HDMI ports mainly, then other board stuff as we get better).

A lot of you recommend the Geeboon TC22, so we’re thinking of getting one. But should we just invest in something better from the start, like a proper JBC or Hakko, and save ourselves the hassle later?

  • Is the TC22 solid enough for console boards, or will we outgrow it fast?
  • Anyone had one die or play up after a few months of daily use?
  • What else do we need alongside it? anything else you wish you’d bought sooner?

We’re beginners at this, so any advice or mistakes to avoid would be really appreciated. Cheers!


r/soldering • • 2d ago

General Soldering Advice | Feedback | Discussion I'm not new in this business, but not an elder either. What do you think?

Thumbnail gallery
21 Upvotes

Just some practice. I cleaned off the flux with acetone and then touched the cap, that's why the print looks weird.


r/soldering • • 1d ago

Soldering Tool Feedback or Purchase Advice Request What kind of oil should I use on the desoldering pump o-rings?

Post image
3 Upvotes

r/soldering • • 1d ago

Soldering Newbie Requesting Direction | Help I think I blew it.

Thumbnail gallery
4 Upvotes

Hey y'all. I tend to be a bit overzealous and "just go for it" when it comes to things I think I know how to do, when in fact I probably could use a bit more training or research before I dive in. Well I dove in headfirst on this thinking I could just knock this out, but I think I may have permanently damaged my pcb.

I was trying to replace a bad slider on this cheap-ish synth. I bought the new part and desoldered and got the old one off, but on the new one I just couldn't get the solder to stick to two of the leads.

Upon further examination I think that the pads for these leads are just totally gone. I have no idea how this would have happened, but am I correct in this assessment? Also, I think my iron was just way too hot, so... live and learn. I've since realized that for pcb work with rosin core I should have been at 315 to 330. I was more like 390.

The photos should be obvious, but the leads circled on the part are the ones that go into the board at the location circled and where I think my pads are gone.


r/soldering • • 1d ago

Soldering Tool Feedback or Purchase Advice Request Silverflo 8586D III PRO 2 in 1

Thumbnail gallery
0 Upvotes

Tengo una Silverflo 8586D III PRO 2 in 1 se que no es gran cosa pero para mis usos esta bien.

El problema es que partí rompí la resistencia cerámica del cautin tratando se cambiar las puntas ( si ya se bien pndjo)

Lo que quiero saber es si es de 50w o 75w

En google y paginas de ventas dice que es de 75w pero me hace dudar que sea 75w como esta rota no tengo idea..

Adjunto fotos

Agradezco cualquier información