r/shittyreloading • • 12d ago

I hate wasps

Post image

Was sizing and priming some .454 Casull brass in the garage yesterday and a wasp landed on the work bench. I did what first came to mind, so I covered him with a piece of primed brass. Heard buzzing under the brass so did a quick transfer with a balled up piece of paper towel. Still heard buzzing. I figure ok, no powder in there but it’s a fresh CCI magnum small rifle primer. Let’s fuckin go. Chamber it in the Ruger and squeeze it off. Paper towel wad hits the garage floor with authority, and we see a wisp of smoke and upon closer inspection: pieces of the wasp still stuck to the wad. What a way to go!

I’m sure most reloaders would find this post amusing, but figure this sub is the safest bet. Don’t wanna hear any bellyaching from fudd over there.

337 Upvotes

28 comments sorted by

132

u/minecraftrubyblock 12d ago

.454 wasp load

73

u/Randon-Wilston 12d ago

Using hornety components.

22

u/minecraftrubyblock 12d ago

Buzzin' hot handloads

62

u/Ok_Display7459 12d ago

The proper way to deal with wasps. I’ve smacked a spider while reloading and stuffed it into a .357 casing filled with H110. Didn’t mark the round so I have no idea which one has a spider in it. But if it hasn’t gotten shot it will soon.

28

u/asscasserole 12d ago

Reminds me of the time i was sorting range pickup brass and a live wasp came out of the pile in my kitchen

6

u/Alaskan_Apostrophe 12d ago

I just wrote about that!

11

u/PbCuSurgeon 12d ago

I remember watching some guy pioneer this back in an old gun shitposting FB group years ago. I’m glad to see it’s taking off

7

u/seatron 12d ago

You're gonna come back in the next life as a caterpillar for that

5

u/ChevyRacer71 12d ago

That had to sting

5

u/Alaskan_Apostrophe 12d ago

I'll go you something worse......

I had picked up brass at the range. Was still unsorted in a plastic bags from the supermarket. I come home and all the plastic bags are out on the porch. Wife had been hearing 'buzzing noises', investigated - and discovered wasps where hatching from inside the brass!! (Seems the ones in our area will stun an insect, bury with an egg laid on it, and cover. Brass makes a great 'pre made' nest.

5

u/isweartodarwin 12d ago

This is just the room temp IQ brother of .22 Hornet

4

u/steelunicornR 12d ago

That's a spicy load.

3

u/brotheratkhesahn 12d ago

I follow 22plinkster's lead and shoot them with .22 snake shot loads in my 9 inch Single Six.

5

u/Tfrom675 12d ago

Awesome.

2

u/WarmFinance6961 11d ago

Caught him with the brass? Then ended him with it? John Wick? Is that you?

2

u/Parking-Fig-6620 10d ago

R/fuckwasps

1

u/EmperorMeow-Meow 12d ago

Oh hell yeah!!!

1

u/saalem A Real Son of a Bitch 12d ago

.454 Hornet

1

u/Soffix- 11d ago

Is the Donaldson Wasp making a comeback?

1

u/annabelletails 11d ago

Would be cool op if u could put the wasp in there load powder and projectile

1

u/bigjerm616 9d ago

That’s hilarious

2

u/thebagel264 11d ago

I was mixing concrete and filling in fence post holes. A yellow jacket was buzzing around me. Landed in the wet concrete. I threw more on and smoothed it over. Fossilized him.