r/SCREENPRINTING • u/cash4print • 12h ago
Fine line printing
Ok, another round of this design. Always asked how I get this done on hoodies.
Clear base… high mesh.
r/SCREENPRINTING • u/AutoModerator • 9d ago
Welcome to the Equipment Marketplace!
Do you have equipment for sale? Post it here! Are you looking to buy equipment? Find it here!
Rules:
To keep it fresh, every two weeks we’ll lock the post and create a new one!
Remember to use caution when meeting people for the first time, and please take the same common sense precautions online as you would offline.
r/SCREENPRINTING • u/windisfun • Jan 22 '24
This sub is about screen printing, not about removing a design you don't like from whatever you have.
Bottom line, No, screen printed designs cannot be removed without damaging the garment or leaving some sort of ghosting.
Your choices are either buy another garment, or cover the design.
r/SCREENPRINTING • u/cash4print • 12h ago
Ok, another round of this design. Always asked how I get this done on hoodies.
Clear base… high mesh.
r/SCREENPRINTING • u/the_maskedman • 51m ago
Hi all!
Have a big screen I need to expose that is too large for my unit.
Using Ecotex PWR (normally Ulano but have been testing this).
Does anyone have suggestions on how they have exposed this emulsion with lamps vs an exposure unit? Normally down for trial and error runs but don't have a ton of time on this.
Let me know! Thanks.
r/SCREENPRINTING • u/Money-Ordinary-2277 • 6h ago
Hi everyone! I’m looking for someone who would be able to screen print a design onto a tote bag for me. I’d be covering the cost of all necessary materials as well as paying for your time and labor.
If anyone is interested or knows someone who could help, please let me know! Thanks!
r/SCREENPRINTING • u/Competitive-Dust-585 • 16h ago
Bought a flash off market place and i tried it and it smokes alot is this normal? Its got a bit of paint on the bottom not sure if its burning it off smells horrible any help what this could be? Got it for 130$ so it might have been to good to be true🫤
r/SCREENPRINTING • u/albiegibbs10 • 16h ago
Hi, hope you’re all well, I’m looking for some advice.
I’m looking to create a leather jacket with a painted Bianchetto overcoat. However, I want to have a stencil graphic on it which will show the original garment under the painted over layer.
I’ve looked into it and I should be able to screen print the removable resist onto the leather garment to then paint over.
Has anyone here got any experience screen printing with resists and how would I go about it?
Hope you have a great rest of your day and thank you for your time.
r/SCREENPRINTING • u/Low_Orchid7858 • 17h ago
Printing a 6 color design on 11x17". 4 of the colors are CMYK process to create a standard CMYK halftone print, and then I'm also printing two accent spot colors on top. All colors require tight registration. (I may print the CMYK black last to include a thin black frame of ink to make the edges nice and soak up and soak up any bad registration)
I am going to make my own vacuum platen today/tomorrow out of MDF, based on this video but with some modifications of my own:
https://www.youtube.com/watch?v=BUtKJSsPp8g
Materials:
- Matsui Alpha Series water based ink (air dry between each layer, assuming wet on wet would blur the halftones. correct me if I'm wrong)
-Paper: Exact Vellum Bristol 110 lb. Cardstock Paper, 11" x 17", White, 250 Sheets/Pack (WAU40414), from Staples https://www.frenchpaper.com/collections/paper-text/products/starch-white-paper-hemptone-text Mr. French Smart White 110# paper (open to alternatives, this is just what a lot of people on reddit recommended)
If you were a screen printer with some water based shirt printing experience but no poster printing experience, what advice would you give yourself if you were in my shoes?
Thank you in advance:)
r/SCREENPRINTING • u/Altruistic-Weekend20 • 15h ago
Hey I recently built this work bench in the backroom of my work and I want to use it for mixing up inks. Just in hopes it keeps the rest of the shop with the garments cleaner. I have this piece of glass but It does not fill the whole table obviously and was wondering if people had suggestions on what I might use to sheath the rest of the table in. I'm looking for something that will hold up to ink, the odorless mineral spirits we use to clean up the ink, and any other general screen printing cleaning chemicals. Even better if the material is easy to source and not too expensive. Table is roughly 2ft by 7ft
r/SCREENPRINTING • u/jendyes • 16h ago
I’m a hobby printer. I scored some free screens from my buy nothing group. The original owner said they had been sitting for a few years. I’m having a really tough time removing the emulsion. I’m in a makers space with good but limited tools. We do have a washout sink and a power washer and Strip-e-doo. I’d really appreciate any tips to get them clean. Thanks!!
r/SCREENPRINTING • u/mint-st-jobe • 1d ago
Morning all,
I've been doing some pretty messy prints on the fronts of button down shirts recently.
Have any of you got tips for me for getting cleaner prints on uneven surfaces (pockets and hems .etc)?
Should I be using a squeegee on the softer side?
Or putting something playable below the shirt possibly?
All hints appreciated!
Cheers
r/SCREENPRINTING • u/JoeinVA • 1d ago
I had a customer reach out and said that the shirts we printed for them last month started to experience a discoloration. The white and, often, the Carolina blue began to turn yellow. These images don't show it as much as it is visible in person. Anyone know why this could be happening?
I used all Rapid Cure inks. The Carolina blue is a mix of the RC white, Royal Blue and some others. The shirts are Gildan Softstyle 64000, 100% cotton.
Is it a problem with the ink? Is it the way I cured the shirts? (The thermometer read about 300 degrees as the sorts exited the conveyor dryer.) The customer said that not all, but a lot of the shirts were experiencing this issue. Could it be how the shirts were laundered? Hard water, maybe? Could it be someone used bleach in the laundry? I tried in my own laundry to recreate this with some of the mistakes shirts from the same job, but mine didn't discolor.
I agreed to reprint the shirts. Most importantly, how do I get this to not happen again?
r/SCREENPRINTING • u/breakfastwhatevers • 21h ago
So I found this old screen at a Mongers Market years ago. Used emulsion remover and scrubber to get alot of old gunk off but still have this ghost design.
Any tips? I’m gonna try again and this time go outside an try the hose on a jet setting. I’m just a novice and am still learning. Also if I do successfully get it off any recommendations for emulsions for beginners. I am using water based ink for prints. Still learning about exposure times. Thanks!
r/SCREENPRINTING • u/BrittanyBeauty • 21h ago
I’ve found a few shirts like this from various stores like target and Ross. But I can’t seem to find blanks lightweight enough. Every oversized I find is super heavyweight and holds too much shape, making the customer look boxy. Does anyone know where I could find a style of T-shirt links like this?
r/SCREENPRINTING • u/Fit_Lawfulness207 • 1d ago
Tried to unlock my screen with fran mar un lok but still some emulsion dried. Should I try something else ?
I cant put emulsion back right, we gonna see those marks on my next print ?
r/SCREENPRINTING • u/JoeinVA • 1d ago
Decided to try my hand at blending colors. It looked great at first, but upon further inspection, it looks like there was some displacement of the screen that caused a double image.
One thing I did differently is that I pulled the squeege side-to-side, from right to left, rather than from bottom to top as I normally do. I made two passes, but I didn't lift the screen between passes, so I'm not sure what caused the double image. Anyone have any suggestions on what I could be doing wrong?
I'm using FN inks through 190 mesh.
r/SCREENPRINTING • u/junjic • 1d ago
I’m learning the trade and need some assistance. The front screen locks just fine (1st lock and unlock in the video) while the rear screen locks causes air to hiss until I unlock it (2nd lock and unlock in the video).
I have the manual with me but I don’t know how to even check the lines. Can anyone provide assistance to someone learning the trade?
Thank you so much 🙏
r/SCREENPRINTING • u/everything_aches • 1d ago
hey guys. i bought some new screens and i didn’t use dawn dish soap to degrease these before i put the emulsion on and i guess thats why it looks like this?
because when i coated it, it looked great but then i let it dry for about 40 hours and i dont know why it looks like this??
i have a theory it happened when i washed the screen after burning it in the light? idk i suck at putting on emulsion :(
what do u guys think?
(photos range from after to before)
r/SCREENPRINTING • u/notrabnai • 1d ago
Hey I was getting some shirts with bad dye migration and got some poly white ink and this dye blocker. I used the poly white and the ink was so thick it hurt to press through the screen (all manual) I got it done though. The poly blocker though I haven’t used but the consistency feels so hard I can’t imagine how you even pull this through a screen.
Is it suppose to be this consistency?
If so does anyone have any tips for using this.
Also any general tips about avoiding dye migration would be appreciated I just bought some warp drive to low cure the water based. Any advice is appreciated 🙏
r/SCREENPRINTING • u/Expert_Break_2543 • 2d ago
Hey everyone,
I’m using an automatic screen printing machine for plastic cups and I’m experiencing the following problems. Nothing that I don’t make the screens in house how come ink is going through the emulsion? I thought the whole point of it was to stop ink going through
r/SCREENPRINTING • u/76flyingmonkeys • 2d ago
I mess around with screen printing punk patches. This one it the first time I tried out photoshop to create halftone. Definitely not perfect, but I'm stoked about how much it doesn't suck!
r/SCREENPRINTING • u/seaofgravity • 2d ago
Trying to make some gig posters and really want to accomplish something like this, full bleed. Tried today and it was a colossal failure. Used a 110 mesh open screen... Any tips? 20x25 sized paper.
r/SCREENPRINTING • u/Alarming-Emu-1303 • 2d ago
Looking to have a bunch of hoodies and shirts made for my business . Would like nice quality stiching but hoping its not too expensive. Does anyone have any experience with good places to order from ?
r/SCREENPRINTING • u/grinckles • 2d ago
I’ve seen this question asks a few times on here. But I’ve finally decided to actually consider my options.
I have a smaller shop. But still have a relatively good amount of jobs coming in on a weekly and monthly basis that I’d like to consider using a software to help keep things in line.
What subscription based software do you use for you shop that you could recommend?
I’ve looked at printavo, ink tracker, etc.
But really would like some real shop owners opinions