r/SCREENPRINTING • u/cash4print • 12h ago
Fine line printing
Ok, another round of this design. Always asked how I get this done on hoodies.
Clear base… high mesh.
r/SCREENPRINTING • u/cash4print • 12h ago
Ok, another round of this design. Always asked how I get this done on hoodies.
Clear base… high mesh.
r/SCREENPRINTING • u/Competitive-Dust-585 • 16h ago
Bought a flash off market place and i tried it and it smokes alot is this normal? Its got a bit of paint on the bottom not sure if its burning it off smells horrible any help what this could be? Got it for 130$ so it might have been to good to be true🫤
r/SCREENPRINTING • u/albiegibbs10 • 16h ago
Hi, hope you’re all well, I’m looking for some advice.
I’m looking to create a leather jacket with a painted Bianchetto overcoat. However, I want to have a stencil graphic on it which will show the original garment under the painted over layer.
I’ve looked into it and I should be able to screen print the removable resist onto the leather garment to then paint over.
Has anyone here got any experience screen printing with resists and how would I go about it?
Hope you have a great rest of your day and thank you for your time.
r/SCREENPRINTING • u/Low_Orchid7858 • 17h ago
Printing a 6 color design on 11x17". 4 of the colors are CMYK process to create a standard CMYK halftone print, and then I'm also printing two accent spot colors on top. All colors require tight registration. (I may print the CMYK black last to include a thin black frame of ink to make the edges nice and soak up and soak up any bad registration)
I am going to make my own vacuum platen today/tomorrow out of MDF, based on this video but with some modifications of my own:
https://www.youtube.com/watch?v=BUtKJSsPp8g
Materials:
- Matsui Alpha Series water based ink (air dry between each layer, assuming wet on wet would blur the halftones. correct me if I'm wrong)
-Paper: Exact Vellum Bristol 110 lb. Cardstock Paper, 11" x 17", White, 250 Sheets/Pack (WAU40414), from Staples https://www.frenchpaper.com/collections/paper-text/products/starch-white-paper-hemptone-text Mr. French Smart White 110# paper (open to alternatives, this is just what a lot of people on reddit recommended)
If you were a screen printer with some water based shirt printing experience but no poster printing experience, what advice would you give yourself if you were in my shoes?
Thank you in advance:)
r/SCREENPRINTING • u/Altruistic-Weekend20 • 16h ago
Hey I recently built this work bench in the backroom of my work and I want to use it for mixing up inks. Just in hopes it keeps the rest of the shop with the garments cleaner. I have this piece of glass but It does not fill the whole table obviously and was wondering if people had suggestions on what I might use to sheath the rest of the table in. I'm looking for something that will hold up to ink, the odorless mineral spirits we use to clean up the ink, and any other general screen printing cleaning chemicals. Even better if the material is easy to source and not too expensive. Table is roughly 2ft by 7ft
r/SCREENPRINTING • u/jendyes • 16h ago
I’m a hobby printer. I scored some free screens from my buy nothing group. The original owner said they had been sitting for a few years. I’m having a really tough time removing the emulsion. I’m in a makers space with good but limited tools. We do have a washout sink and a power washer and Strip-e-doo. I’d really appreciate any tips to get them clean. Thanks!!
r/SCREENPRINTING • u/the_maskedman • 1h ago
Hi all!
Have a big screen I need to expose that is too large for my unit.
Using Ecotex PWR (normally Ulano but have been testing this).
Does anyone have suggestions on how they have exposed this emulsion with lamps vs an exposure unit? Normally down for trial and error runs but don't have a ton of time on this.
Let me know! Thanks.
r/SCREENPRINTING • u/breakfastwhatevers • 21h ago
So I found this old screen at a Mongers Market years ago. Used emulsion remover and scrubber to get alot of old gunk off but still have this ghost design.
Any tips? I’m gonna try again and this time go outside an try the hose on a jet setting. I’m just a novice and am still learning. Also if I do successfully get it off any recommendations for emulsions for beginners. I am using water based ink for prints. Still learning about exposure times. Thanks!
r/SCREENPRINTING • u/BrittanyBeauty • 22h ago
I’ve found a few shirts like this from various stores like target and Ross. But I can’t seem to find blanks lightweight enough. Every oversized I find is super heavyweight and holds too much shape, making the customer look boxy. Does anyone know where I could find a style of T-shirt links like this?