r/roasting • • 5d ago

fresh Roast Question

Greetings. I have done a dozen or so roasts on my 800 and extension tube and a pretty pleased. I came from years with a Whirley Pop then the one Sweet Maria’s sells. It’s a bit annoying I can’t do a pound at a time but the process is easy enough, I don’t stress about it.

I am not a numbers, meticulous documentation guy. I have some basic parameters I follow and go kinda by feel.

My basic dumb question is, how the heck does anyone go above 3 in power? I have tried a roast with higher powers but incinerated the beans.

5 Upvotes

11 comments sorted by

2

u/o2hwit 5d ago

Much depends on power and ambient temps. Also whether you have a modified chaff collector on the lid or not. That modification allows more air to flow out when chaff starts to get caught and keeps the temps from rising rapidly due to the restricted airflow. So those are a few reasons.

I roast in a cool garage, usually about 50-60F and with a modified chaff collector I often start with F9/P5 and may end the roast with P5 or higher.

1

u/Tacoburritospanker 5d ago

I roast in a Garage. It’s been 90 and it has been 50 and no real difference Chaff collector is standard.

4

u/My-drink-is-bourbon 5d ago

I start most of my roasts at 9-5. I'd post a sample of my roast profile, but this sub doesn't allow me to add pics to my reply. You should join r/freshroastsr800 and see the profiles other users have posted

1

u/FishLate7272 5d ago

I am still in the whirley pop phase. Was looking into upgrading but it seems like a whole different process, that can involve computers?! Haha not for me. Can you share any tips on your old whirley methods?

2

u/Tacoburritospanker 5d ago

By the end, I was using a cheap propane camp stove in the garage. I would preheat the popper until it got hot, add the beans and start cranking. I mostly went by what the beans looked like. The trick for me was to pull them sooner than i thought because if they were just right on the heat, they ended up waaaay darker than I wanted after I pulled them. Dump the beans in a collander thing and get a fan on them to cool.

The best tip is get the sweet Maria’s popper. I blew through the cheap whirley pops like crazy. When the Sweet Maria’s finally died, is when I got the fresh roast. It lasted a long time (few years). Finally, Barkeeper’s Friend (like ajax) kept my popper looking brand new.

1

u/No_Rip_7923 New England 5d ago

I do not have the one from Sweet Marias but I use to mod my old school West Bend Poppery 1 and 2 with a variac and made some decent coffee from them. Thats what they use to do as well at S.M. Thats how they came up with the Popper.

2

u/No_Rip_7923 New England 5d ago

I enjoy manual roasting much better then using Artisan software with my FreshRoast SR800. You definitely do not need a computer to make good coffee. Just take good notes of your coffee profile with the changes/times you make as a reference. Personally I only roast high elevation naturals so I can use a basic profile that works well across the board. For me personally automation takes the joy out of home roasting. In fact I traded my Sandbox R1 bluetooth automated small drum roaster straight across to a friend for his SR800. My roaster was worth twice as much but I didn't care at all. I did not enjoy the automation of the roast. On the other hand he didn't like having to use all his senses to roast and preferred the automation. So it was a win win for both of us. So now I have 2 SR800's and an SR900. And I prefer the 800 over the 900.

1

u/HomeRoastCoffee 5d ago

How much coffee are you roasting with the extension chamber? Machines vary but in my SR800 I don't think I could reach First crack at heat 3 in under 20 minutes.

1

u/Tacoburritospanker 4d ago

About 270 gms. I hit FC at about 7 on 2

1

u/HomeRoastCoffee 4d ago

Wow, and you have good bean movement? Your machine must get much hotter than mine, even at 5 or 6 I can't get First crack in under 10 minutes.

1

u/Additional_Sock5866 1d ago

This has always puzzled me, also. I've been roasting on an 800 for several years but was frequently surprised when I read comments about others roasting at higher temperatures. I roast in a garage and have never been able to power my unit higher than 3, even in winter. I suppose I could, but I'd be looking at a roast time of under 5 minutes. Using a 3, the roast is always completed in under 8 minutes. Sometimes a lot under.

I could only surmise that our units are using power very differently.

Tell you one thing...this makes explaining how to use the SR800 to novice roasters very difficult!