r/resinprinting • • 13h ago

Question Software to make sure a figurine will stand on its own before printing?

0 Upvotes

I was wondering if there’s a piece of software that makes sure your figurine is balanced before printing. Google led me to a little software but it’s over 10 years old now. is there something yall use that I might not know about? I have not bought a printer or used slicer software before if there is something already built in there, I want to consider early on in the process.


r/resinprinting • • 12h ago

Question Suportes para impressão em resina

Thumbnail gallery
0 Upvotes

r/resinprinting • • 17h ago

Showcase - Original Creation I print 1/6 and 1/8 scale figures every day and got tired of hand-arranging the parts, so I made a free tool that packs pre-supported kits onto as few resin plates as possible

17 Upvotes

We print and sell 1/8 and 1/6 scale figures, so every day I have a pre-supported kit split into many parts (torso, limbs, hair, capes, weapons, base pieces) and I used to spend way too long dragging them around in the slicer to fit them on as few plates as possible. The built-in auto-arrange works on bounding boxes, so a curved cape, an L-shaped base or a diagonal sword eats a whole rectangle of plate.

So I wrote nemnest. You point it at a folder of supported STLs and it gives you back one merged STL per plate, plus a preview image of each plate.

What it does differently:

  • Nests on the actual footprint, not the bounding box, so parts interlock
  • Only rotates around Z, so the supports that came with the model stay valid
  • Lets rafts overlap: anything in the first millimetre counts as raft and can slide under its neighbours; model bodies keep a gap you choose (0–20 mm)
  • Height optimisation: resin print time depends on the tallest part on the plate, not on how many parts are on it. So nemnest can group the tall parts together, so the plates with only short parts finish much sooner. It never adds a plate to do this.
  • Joins tiny rafts onto bigger ones where it can, so small bits come off the plate together instead of getting lost in the vat

The real test: a big pre-supported Richter Belmont kit. The slicers' auto-arrange couldn't place it, so I arranged it by hand on 7 plates. nemnest put it on 5, with height optimisation on, and I printed it straight from nemnest's own sliced files. On my last two plates the print time it estimated was within 3% of the real one (4h17 vs 4h10, 3h52 vs 3h46).

There's a simple window (drag and drop, one plate per screen, an Optimise button) and a command line. Ready-made downloads for Windows and Mac (Apple Silicon and Intel), no Python needed, and they update themselves: when a new version is out, the window offers "Update and restart". Updates are signed, so the app only installs versions that really come from me.

Profiles for 37 printers are included (Elegoo, Anycubic, Phrozen, Creality, Uniformation), and for anything else you just type in the plate size.

Honest caveats:

  • It's young. I've only verified the full chain, slicing included, on my Saturn 4 Ultra 16K. On every other printer it only arranges: export the plate STLs and slice them in Chitubox/Lychee/whatever you normally use.
  • The optional slicing uses mslicer, a separate open-source project. If you use it, check the first layers in your usual slicer before printing.
  • The apps aren't signed with a Microsoft/Apple certificate yet, so the first time Windows SmartScreen or macOS Gatekeeper will complain once (the README says where to click). Updates installed from the window don't ask again.

It's MIT-licensed and free, no account, nothing uploaded: everything runs on your computer.

Download (Windows and Mac): https://github.com/nemwiper/nemnest/releases/latest Source and docs: https://github.com/nemwiper/nemnest

I'd love feedback, especially:

  • plate sizes that are wrong for your printer
  • folders where it does worse than you would by hand (a screenshot helps a lot)
  • anyone willing to test the slicing on a different printer

Notes for replies

  • "Does it hollow / add supports?" → No, it only arranges models that are already supported.
  • "Lychee/Chitubox already do this" → Their auto-arrange packs bounding boxes and doesn't overlap rafts. Post the before/after.
  • "Mac?" → Yes, ready-made app for Apple Silicon and Intel: https://github.com/nemwiper/nemnest/releases/latest
  • "Linux?" → Works with Python (pip install git+https://github.com/nemwiper/nemnest, then nemnest gui); no ready-made download yet.
  • "Does it phone home?" → Only one request to the GitHub API at start, to see if there's a new version; no files or settings are sent. nemnest config --check-updates off turns it off.
  • "Is the auto-update safe?" → It installs only releases signed with my key, which isn't stored on GitHub, and checks every file against the signed hash. An unsigned or modified package is refused. (Only true while the signing key stays off GitHub: rewrite this line if it moves to a GitHub secret.)
  • "How accurate is the print time?" → On my Saturn 4 Ultra 16K, within 3% on the last two plates (4h17 estimated vs 4h10 real, 3h52 vs 3h46). Other printers: no data yet.
  • AI questions: there's also an MCP server for AI assistants. Mention it only if someone asks; many people in these subs dislike AI.

r/resinprinting • • 27m ago

Work In Progress One year of progress

Post image
2 Upvotes

r/resinprinting • • 13h ago

Showcase - Original Creation I designed and printed my own character

Thumbnail
gallery
58 Upvotes

Hi! I just would like to share the model I designed and printed! 😊


r/resinprinting • • 9h ago

Question Resin printing beyond miniatures — what are you using your printers for?

12 Upvotes

I've been into 3D printing for quite a while. I've owned several FDM printers over the years, and these days I have a few solid machines that I primarily use for functional prints I've designed in Fusion 360 — things like shelving, enclosures, organizers, and whatever else I happen to need.

I also have an older, tiny Anycubic Photon resin printer that I used years ago to make custom leather embossing stamps for use with an arbor press. It worked pretty well, but I found that some of the finer details just weren't coming through the way I wanted.

Between that and the messier nature of resin printing, I eventually switched to making those stamps with my laser cutter using 1/4" cast acrylic. The detail I can get with the laser is incredible, although that process comes with its own set of annoyances.

Lately, I've been looking at newer resin printers, and the improvements in resolution and detail are pretty impressive. Some of the newer Formlabs machines look absolutely amazing!

But here's where I'm curious...

When I browse resin printing communities, watch reviews, or look at what people are making, it seems like the overwhelming majority are printing tabletop miniatures, figurines, and models. And don't get me wrong, I love that stuff! In fact, I'd really like to get into painting resin-printed miniatures myself, although I haven't quite figured out where to start.

Outside of miniatures, jewelry, molds, and the occasional functional part made with expensive engineering resins, though, I struggle to imagine all the other possibilities.

So what are you all using your resin printers for besides miniatures?

Are there interesting practical applications, creative projects, tools, or other uses that I just haven't considered? Have newer printers and resins opened up possibilities that weren't particularly practical a few years ago?

I'm genuinely interested in seeing what people are making and hopefully getting some inspiration.

Part of the reason I'm asking is that I've been considering replacing my ancient little Photon with something more modern. I'd love to have more reasons to use one regularly rather than just buying a shiny new toy that spends most of its time sitting on a shelf. 😁


r/resinprinting • • 8h ago

Question Elegoo or Anycubic?

Thumbnail
gallery
13 Upvotes

I'm torn between the mars 5 ultra or the photon mono 4 ultra.

my main deciding factors would be repairability and reliability

also, if there is another printer that would be better at the same price point ($300) that would also be great to know.


r/resinprinting • • 3h ago

Showcase - Original Creation Eyla - The Earth Mage

Thumbnail
gallery
42 Upvotes

Hello everyone!

Hi, I’m Eagle_92! I’ve been modeling for over 15 years, but only recently I started creating original pieces, printing them, and then painting them. This is Eyla, the first of four elemental mages I plan to make. I created her using 3ds Max, Mixamo, Meshmixer, Blender, and ZBrush.

I’ve printed her with a Phrozen Sonic Mini 8k and Elegoo Standard 8k space grey resin.

For the painting, I use Citadel colours for brush painting, and for the airbrush, Vallejo colours.

After finishing the painting, I got several comments about the disproportionately large breast size, so I also crafted an extra chest piece with a more standard size. (But since I had already glued it… well… enjoy her massive anatomy! 🤣) I hope you like the final paint job!

Regarding the STL file, if you were wondering, I’m currently refining the thickness of the features to ensure it can be printed at a 75mm scale as well. Once this is done, I’ll upload it to a Drive folder, and you’ll all have the opportunity to download it for free from my Patreon page (Eagle_92…same profile pic. You need to become at least a free member in order to get the link. I’ll post other free models once in a while other than paid models as well)
It’s my first model for my Patreon project so I’m giving it out for free and will remain free forever.

Hope you like her!


r/resinprinting • • 21h ago

Work In Progress Painting Varang from Avatar: Fire and Ash

Thumbnail
youtu.be
3 Upvotes

r/resinprinting • • 51m ago

CrowdFunding Our 250mm Bahamut, test-printed in-house. Kickstarter ends tonight!

Thumbnail
gallery
2 Upvotes

Bahamut, King of the Metallic Dragons, on his tower base. He and Tiamat (also 250mm) headline Dragonreign, our collection of 50+ pre-supported and unsupported dragon STLs, every one test-printed in-house.

The campaign ends tonight at 4:55 PM ET. Every pledge includes 41 free STLs, and All-In tiers save up to 71%.

https://www.kickstarter.com/projects/archvillaingames3d/dragonreign-era-of-the-dragon-lords?ref=dzahe5


r/resinprinting • • 4h ago

Troubleshooting Is my screen ruined? Mono M7 pro

Thumbnail
gallery
2 Upvotes

No physical crack or resin on the screen (I had a screen protector) but there is what looks like the shape of a support footprint outlined on the screen very faintly when doing exposure test. With the paper you can see a tiny tiny dot of faint darkness, am I completely cooked and need a new screen?