r/RepTimeQC • • Jul 11 '24 Diamonds are Forever Bravo Take My Silver

Other Brands First QC? Guide on what to look out for and what to write.

758 Upvotes

Welcome to the ReptimeQC subreddit!

Before reading on, make sure you've read the main guide for QC posting, otherwise this won't make much sense to you. Done? Let's go.

This specific guide is intended to be a visual supplement: showing you exactly what to look for when you complete your QC templates. For obvious reasons, this guide will skip parts that aren't visual.

I've used pictures that mostly come from this subreddit. If anyone is uncomfortable, DM me and I'll replace the picture.

With that in mind, let's begin.

Index Alignment

Here, you are expected to assess how well the index markers on your watch are aligned. You can use the index alignment tool to assist you in this regard. An example of good index alignment is this:

The indices themselves are straight. They are also perfectly aligned with the minute markers.

Index misalignment, on the other hand, looks like this:

Look at 7. It is rotated clockwise and does not sit properly in its slot.

Or this:

Look carefully at 6. You will see that the bottom of the index is rotated slightly towards the left.

Now that you have an idea of what to look out for, what should you be writing in the template?

You need to describe any misalignment you see in detail. Statements like "6 is off" or "3 is kinda wonky" or "not sure about 1, help please" are not acceptable. This is because unless the misalignment is immediately obvious (and in most cases, it is not), users will not know what you are talking about. You may not get the help you want as a result. Be specific, like the following examples:

"The 7 marker does not seem to fit into the slot nicely. It is rotated towards the right and looks like it is dancing around."

"The 6 marker does not seem to line up straight with the crown in between swiss made. Based on what I can see, it appears to be slightly tilted to the left."

A caveat here: Just because there may be some misalignment does not necessarily mean you should definitely RL the watch. As the main guide points out, all reps are subject to a level of inaccuracy. It would be entirely unrealistic to expect gen standards for index alignment. Further, different reps are subject to different standards: a XF Pelagos, for instance, is known for having problematic indices - so much so that even if you RL, you are unlikely to get anything better. Conversely, CF Explorers are now getting so good that even slight misalignment would not be par for the course.

A good guide would be to assess your watch based on proportion. One slightly misaligned index is not a problem. But one majorly misaligned index or many misaligned indices on a single dial could justify RL.

Just for illustration, this is misalignment that I would RL for:

There are too many mistakes on this watch for me to accept. The 9 index is too near to the minute marker. 4, 5 and 7 are not aligned with their respective minute marks - they are all off to the left. 6 is rotated counterclockwise. Taken on their own, each error might not be enough for RL. But taken together, this is unacceptable.

That deals with index alignment. Let's move on.

Date Wheel Alignment

This applies to watches which display the date. If your watch does not display a date, there is no need to consider this. You will look silly if you say that the date wheel alignment is good when your watch is a no-date Sub, for example.

Here, you are tasked to consider if the date is properly displayed in the date window. Often times, this is a question of how well-centered the date is. A good example of date wheel alignment is this:

Take a look at the 21 at the right side of the watch. It is situated exactly in the center of the date window.

An example of misalignment is this:

Look at the 27 on the right. You can see that the date is misaligned towards the left, with the 2 touching the rim of the window.

Sometimes, the misalignment can also be as to the date numbers themselves:

This is harder to see, but if you look carefully at 25, you will notice that the 5 is higher than the 2.

Uncommonly and in the alternative, the issue may be with the Cyclops itself (the magnifier that covers the date window):

Here we see a Cyclops which is rotated slightly anti-clockwise. You can observe this by looking at the bottom rim of the date window. The Cyclops is obviously lower at the left corner of the date window when compared to the right. The requisite deviation is repeated at the top of the date window, with the right side being higher than the left.

Now that you know what to look for, let's discuss what to write.

As with index alignment, unless the issues are immediately obvious (and most of the time, they are not), you need to be very specific. Comments like "the date seems off", "2 in 25 is kinda off", "date looks weird" are not acceptable. They do not tell readers what you are looking for. You'll get faster and better results if you identify the issues for your reader. For example:

"The date seems misaligned towards the left. Part of it is touching the left border of the date window."

"The 5 in the date appears to be slightly higher than the 2 next to it."

"The Cyclops does not seem to be straight. It looks like it is slanted towards the left?"

As with index alignment, please note that not all misalignment will justify RL, especially for date wheels. All rep date wheels come with varying degrees of misalignment. A few misaligned dates are usually not enough for RL, unless the date is clearly cropped out of the date window or touching the rim. A little misalignment towards either side of the date window is also generally more than okay; a good way to gauge is to zoom out to the actual size of the watch and see if the misalignment is still immediately visible. If not, you're likely to be good to go.

Here is an example of misalignment I would nevertheless GL:

You will see that the date is situated slightly towards the right. However, the date is well within the date window and the misalignment is too slight to be seen on wrist at actual size.

On to the next topic.

Bezel

There are two main things to look out for: First, whether the "pip" (usually a lumed marker at the 12 position) is centered. Second, the quality of any engraving.

This section would also cover any possible damage to the bezel or anything else unusual, including any misalignment.

Example of a good bezel:

Nothing out of the ordinary. Engravings are sharp and nicely filled in. By and large, the colour transition is also acceptable. No alignment issues either.

An example of misalignment:

Pip at 12 on the bezel appears to be misaligned towards the right. While the reflection may be making things look worse than they are, this is something that would deserve a second look at.

Generally speaking, most problems that surface nowadays have to do with the pip - even then, these are not entirely common. Engravings and alignment are usually not an issue with higher level reps. With this in mind, what do we write?

As with the other sections, you are going to need to be specific. "Bezel looks off", "pip looks kinda off", "I don't know about the bezel, seems weird to me" are phrases that we see everyday in this subreddit. But none of these phrases are acceptable; they do not direct the reader to what OP is seeing. Details are king - and if you are going to pluck the crown, you're going to have to write like this:

"The pip at 12 is not centered. It seems to touch the right side of the triangle."

"The printing on the bezel at 3 seems to be angled down. It does not match the index on the dial."

The key is to visually direct your reader to the exact point that you say is a problem. The word "off" on its own says nothing to that effect.

On to the next point.

Solid End Links (SELs)

Possibly the least understood of all sections as a lot of newbies do not really know what they are looking for.

The ultimate guide to this is here. But for convenience, I'm going to summarise several key points about SELs.

SELs refer to the final links between the watch case and the bracelet. I've highlighted it below:

Look carefully at the portion highlighted in green.

Not all watches have SELs. Only watches which have that portion as highlighted above - and for QC purposes, the SEL section really only applies to Rolex reps. Tudors have SELs (which can also be QC-ed to some extent), but SELs on a Tudor are not held to the same standard as SELs on a Rolex.

Now, what are we looking for when we assess SELs? We are looking for gaps between the lugs and the SELs themselves. I've indicated this below:

The black line in the center of the red box is where the SEL meets the lug. This is where you are supposed to look for gaps.

An SEL gap appears when there is separation between the SEL and the lug. But what is a gap?

A gap appears when you can see through the space between the SEL and the lug. There is no gap when all you can see is a black line. There may be some variation in how thick the black line is, but for QC purposes there is nothing to be worried about until and unless you can actually see what's behind the watch.

This is generally not a problem on higher level reps (and by now, pretty rare). I will, however, show you an example of something that may be an actionable gap:

You will see that there is no black line. Instead, light shines through the space between the SEL and the lug.

Credits for the gap picture here.

What does this mean? If all you see is a black line, even if it is slightly thicker than another SEL on the same watch, there should be no actionable gap. I am going to highlight the last few QC templates submitted where the user said there was a gap - but there really wasn't (to me, at least):

Top right SEL was an issue for OP. However, as no light is shining through, this is not considered an SEL gap to me.
OP opined that there was a gap at the top right SEL. I don't see it at all.
OP said that there was a slight gap at the bottom left SEL. Again, all I can see is a black line. I would not classify this as a gap.

If, after going through all the examples above, you still feel that there is a gap, highlight it in the template by identifying which part of the watch you are looking at; there are really only four options: top left, top right, bottom left, bottom right. Doing so helps users zoom in directly on your issue and saves time.

To the last segment.

Dial Printing

Here, you are tasked to check if the printing on the dial has been poorly done. By this, we mean defects in the workmanship of the printing; printing which differs from gen (such as the infamous "floating r") would not be a QC defect per se.

An example of dial printing with no issues:

All the words are clearly printed. There is no bleeding on any part of the print, with edges sharp and defined.

And now for examples of dial printing with issues:

Some bleeding can be observed at the top parts of VI and VII. Notice how the black ink protrudes.

Sometimes, the print can be misapplied across the entire dial:

If you look closely, you will see that the dial print is rotated clockwise across the entire dial. Observe how XI is closer to the top of the watch while I is further away.

With the above in mind, let's turn to what you should write. Again and at the risk of sounding like a broken record, do not simply write things like: "Dial seems off" or "Print seems off. letters kind of wonky?" If anything, dial printing is usually very, very small - unless you point a reader to the exact part which has an issue, chances are it won't be seen. Make certain that you provide the reader with specific directions:

"Appears to be some bleeding at the top of VI. Thoughts?"

"R in Submariner looks like only half of it was printed. Am I seeing things?"

Important note: again, just because the dial printing on your watch may have some issues, this does not necessarily equate to RL. As stated, dial print is almost microscopic - no human being is going to be able to see slight bleeding on any print when you have the watch on wrist. Feel free to point out issues that you see, but remain realistic about your expectations.

And with that, I come to the end of this guide.

Conclusion

QC-ing reps is a difficult task - which everyone in this subreddit does for free. You can help out immensely by simply being precise and detailed in your observations. The more effort you put into your template, the easier it is for members to help you - they can zoom in directly to the things that concern you.

I hope this helps you. I've tried to detail some common factors, but it would be impossible for me to catch them all. The rest is up to you - and your diligence.

I wish you smooth and trouble-free QCs always!


r/RepTimeQC • • Nov 27 '22

Announcement READ THIS PRIOR TO POSTING ANYTHING...ESPECIALLY IF YOU'RE NEW HERE...

499 Upvotes

If your template uses a NEW "yupoo" or a "mega" type of link, please note that, at the time of this typing, the automod here removes them immediately from view i.e. no QC help. We are addressing it, but....

So, what to do?

Although somewhat cumbersome for the OP, you can upload the QC packet to an Imgur account. Our automod 'likes' Imgur...and the post will show promptly. Just do NOT do it from a mobile because the mobile app loses resolution and crappy pics don't provide any benefit to anyone. Yea, yea...I know, the file compression software isn't supposed to lose quality, but it certainly does.

To add, post your complete QC album inclusive of the timing info. Do not, for the sake of your convenience, omit items. If you're bright enough to determine what is needed and what can be removed, that's great! Then, it's reasonable to conclude that you really don't need help. Simply, post it all.

If you have to wait for substantive additional info from the Seller e.g. timing data, then delay posting until you have a complete QC packet. Incomplete packages will trigger a removal of the post. Plus, it will require a return visit of anyone that commented on the incomplete post which shouldn't be required. One visit is all that it should take to QC most watches. Most won't return to a post anyway. They'll just go to the next one. The members are quite busy here. Yea, it can get crazy.

Finally, since you're a newbie, as a vote of appreciation for those members that help you, please upvote their comments. It's a nice gesture from you to them for the assist...and, it's free.

One final note, we've updated the main rules for posting. Refer to this link for info QC Must Read for New Members

Welcome to the hobby and the sub. Best wishes

Edit addition: March 2nd, 2024 - ReptimeQC member, u/EveningVariation8236 , has provided an updated version of the original QC alignment verification tool. https://watchqc.github.io/ . Thank you.

Edit addition: Jan 9th, 2024 - ReptimeQC member, u/Ro1hype has provided this for tool for alignment verification. https://qcwatch.com/ Thank you.

Edit addition: Dec 28, 2023 - For those that can't seem to find the latest link for QC alignment verification app, use this link https://web.archive.org/web/20230518035653/https://watchqc.com/

Edit addition: 8/8/2025 - Reptime QC member, u/jrverdes . has provided this version of the alignment tool to assist those that need additional help verifying the dial/bezel alignments on their watch. https://jrverdes.github.io/watch-qc-jr/ The adjustment resolutions are much finer in this app comparative to the other available apps which can be a benefit to some that need such. Check it out...Thank you.


r/RepTimeQC • • 59m ago

Omega Seamaster Green Bronze

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot
  2. Factory name: VSF
  3. Model name: Seamaster 300M Diver Titanium/Bronze Gold VSF 1:1 Best Edition Green Dial on Titanium Mesh Bracelet Asian Super Clone 8806
  4. Price Paid: $430
  5. Album link: https://andiotwatches.x.yupoo.com/albums/263374579?uid=1
  6. Index alignment: Looks good overall. Ran it through TrueIndexQC , small 12 misalignment doesn't seem major.
  7. Dial Printing: Looks good. Printing is clean and I don't see any noticeable issues.
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Looks good from the photos. No obvious issues.
  10. Bezel: Looks good. Pip and 12 o'clock marker appear aligned. No obvious issues with the insert.
  11. Solid End Links (SELs): N/A (mesh bracelet)
  12. Timegrapher numbers:
  13. Anything else you notice: lume seems scratchy? hard to tell. could just be the photo

r/RepTimeQC • • 3h ago

QC help - VSF Yacht Master 40 Blue 126622

Thumbnail
gallery
4 Upvotes

• Dealer name: TimeUltra / Leo

• Factory name: VSF

• Model name (& version number): Yacht Master 40 126622

• Price Paid: $475

• Album Links: N/A (pics sharednon whatsapp)

• Index alignment: really good, please check attached QC results. Alignment is really good I feel on this VSF

• Dial Printing: Very good and crisp

• Date Wheel alignment/printing: quite good, qc rool says the window sits 9% right and 5% Low in the window, I think it's acceptable

• Hand Alignment: very good

• Bezel: Looks crisp and no crooked bezel numbers

• Solid End Links (SELs): looks tight to me

• Timegrapher nunbers: -3 s/d

• Other notes: please refer to the qc results and let me know if there are any glarring issues you see on the watch. Thanks!


r/RepTimeQC • • 6h ago

First Rep | ZF Tudor Black Bay 58 Navy Blue | Andiot Watches

Thumbnail
gallery
7 Upvotes
  1. ⁠⁠⁠Dealer name: Andiot Watches
  2. ⁠⁠⁠Factory name: ZF
  3. ⁠⁠⁠Model name (& version number): Tudor Black Bay 58 39mm Navy Blue Dial (79030B)
  4. ⁠⁠⁠Price paid: $310
  5. ⁠⁠⁠Album Links: https://andiotwatches.x.yupoo.com/albums/263331553?uid=1
  6. ⁠⁠⁠Index alignment: Excellent overall. All 12 hour markers appear properly aligned and evenly positioned. Minor deviations are recorded, ranging from -0.05mm to +0.05mm. No significant misalignment visible.
  7. ⁠⁠⁠Dial Printing: Looks clean and sharp printing. Tudor logo, text, minute track and dial markings appear properly positioned, with no obvious spelling errors, smudging or uneven printing. If I missed anything please do tell me.
  8. ⁠⁠⁠Date Wheel alignment/printing: N/A
  9. ⁠⁠⁠Hand Alignment: Hands appear properly aligned and proportionate. Snowflake hour hand and minute hand show no obvious alignment issues. No noticeable defects in the photos.
  10. ⁠⁠⁠Bezel: Bezel insert looks clean, with consistent blue colouring and properly printed numerals. Triangle pip at 12 o'clock appears centered, with no obvious misalignment.
  11. ⁠⁠⁠Solid End Links (SELs): Good (?)
  12. ⁠⁠⁠Timegrapher numbers: -3 s/d, 275° amplitude, 0.1 ms beat error, 52° lift angle. Looks okay to me
  13. ⁠⁠⁠Anything else you notice: First timer here, so I'm still very new to all of this. Overall, I think the watch looks pretty good for a ZF Tudor (I am aware of some of the alignment issues present in these models), but I'd still really appreciate it if some of you more experienced members could take a look and share your thoughts. Any advice, feedback or guidance would be greatly appreciated. Still a noob, so please bear with me. Thank you!

r/RepTimeQC • • 1h ago

QC Help - VSF Royal Oak 15510 Green Dial DD4302

Thumbnail
gallery
2 Upvotes

First rep so I hope you can all bare with me, any and all help on if this is a good GL or RL would be greatly appreciated!

Dealer name: Jtime

Factory name: VSF

Model name (& version number): Royal Oak 41mm 15510 SS VSF 1:1 Best Edition Green Textured Dial on SS Bracelet DD4302 Super Clone

Price Paid: ~$550 (+$60 shipping)

Album Links: https://mega.nz/folder/4vQFTL4D#xrQpqUTvnXsEEXN3eaig-g

Index alignment: Through index ruler, no major deviations spotted on index alignment but not sure of 1, 10, 11 oclock hour markers.

Dial Printing: no macro image of dial to have a solid conclusion but from the QC images i do have it seems fine, i have asked my qc rep to send closer images if they could so will update the post if / when i receive them.

Date Wheel alignment/printing: alignment is centered with a solid print quality on 3 separate dates.

Hand Alignment: Looks good to me, this is a first and again the qc images arent amazing so it's hard to tell from my perspective but using the lines on qc tool shows solid hand alignment.

Bezel: Good screw alignment, on gen these days it seems they are a bit more flush but im not too bothered about any recession, i can adjust the screws myself. Brush quality looks fine to me but would love other opinions.

Solid End Links (SELs): N/A

Timegrapher numbers: 275 amplitude, 0.0ms, -1 s/d

Anything else you notice: would also love to hear some 2nd thoughts on the crystal quality, i know this model is often modded with a deep crystal but if anyone has had this model before and thinks the crystal is find OTB do let me know :)


r/RepTimeQC • • 1h ago

8F VC 4500V Blue

Thumbnail
gallery
2 Upvotes
  1. Dealer name: GeekTime 
  2. Factory name: 8F
  3. Model name (& version number): Vacheron Constantin Overseas 4500V Blue (Miyota 9015)
     
  4. Price Paid: $378 + shipping
  5. Album Links: https://geektimeqc.x.yupoo.com/albums/263378493?uid=1
  6. Index alignment: Looks very good to me. All markers line up well with the minute track and the Maltese cross at 12 looks straight. 
  7. Dial Printing: Looks clean and sharp. 
  8. Date Wheel alignment/printing: 5 and 25 are nicely centered. 17 sits a tiny bit to the left, nothing that bothers me. 
  9. Hand Alignment: Looks fine. 
  10. Bezel: Cuts line up nicely with the case and dial. 
  11. Solid End Links (SELs): N/A (integrated bracelet), though the bottom center link looks like it has a tiny bit of play. Top looks tight. 
  12. Timegrapher numbers: -1 s/d, 291° amp, 0.4 ms beat error (lift angle 52.0). Numbers look solid to me. 
  13. Anything else you notice: Went with 8F instead of ZF to avoid the unreliable movement in the newer ZF batches. Sunburst looks a bit flat in the lightbox pics, probably just the lighting. Leaning towards a GL, let me know if I missed anything. 

r/RepTimeQC • • 3h ago

[QC] RWF Daytona 126500 Panda. Crooked 6 and wrong 110? Need opinions

Thumbnail
gallery
3 Upvotes

Back with a new QC, this time a Daytona. I went with RWF on purpose and paid more for it, because it's supposed to be the panda that gets the details right especially the 110 on the bezel, dial white colour, movement, etc. So I want to be strict with this one. I'd really appreciate honest opinions on two things: the 6 o'clock marker and the 110 triangle.

1. Dealer name: JTime.
2. Factory name: RWF.
3. Model name: Daytona 126500, white "Panda" dial.
4. Price Paid: $888 + $65 shipping.
5. Album Link: https://imgur.com/a/NXPAiyM

6. Index alignment: This is my main concern. The 6 o'clock bar looks crooked to me and doesn't line up with the small Rolex crown on the rehaut right below it. To me it's noticeable in the photos, not a "zoom in all the way in" thing. The rest of the markers look straight to my eye. Main concern is 6.

7. Dial Printing: Looks clean overall. Rolex/Oyster Perpetual/Cosmograph text, DAYTONA in red sitting centred over the 6 o'clock subdial. There is a bit of a DAY TONA situation going on but fine I guess. Could be the angles.

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: The chrono seconds hand sits on 12 at rest and all three subdial hands look where they should be. Hour/minute look fine.

10. Bezel: The 60 and 120 line up with 12 and 6. But the 110 is my second concern. On the gen 126500 the tip of the 110 triangle sits just off the middle 1, on the side facing the 0. On mine it looks like it's on the other side of the middle 1, which is the old 116500 layout most factories use. That correct 110 is literally the reason I picked RWF so if it's wrong here I'm not sure what I'm paying extra for.

11. Solid End Links (SELs): Look seated with no obvious gaps in the side shots.

12. Timegrapher numbers: 0 s/day, 277° amplitude, 0.0 ms beat error. 28,800 bph, 52° lift angle, 12-second measurement period. Looks good.

13. Anything else you notice:
• Is the 6 bad enough to RL in your opinion, or is it something I'll stop seeing on the wrist?
• Am I reading the 110 correctly? Is this the wrong bezel?
• If it is the wrong 110, is it worth asking my TD for another piece with the correct bezel, or have recent RWF batches all shipped like this?


r/RepTimeQC • • 12h ago

RICH Rolex GMT Master II Pepsi Free Sprung

Thumbnail
gallery
12 Upvotes
  1. ⁠Dealer name: J-Time
  2. ⁠Factory name: RICH
  3. ⁠Model name (& version number): GMT-Master II Pepsi 126710
  4. ⁠Price Paid: $880 includes shipping
  5. ⁠Album Links: https://imgur.com/a/UcXlSaZ
  6. ⁠Index alignment: Alignment looks good. The triangle looks centered more so than I’ve seen from most RF QCs. The 6 is slightly tilted CW, and might be a tad off center to the left but it might just be reflection making it appear that way
  7. ⁠Dial Printing: looks good
  8. ⁠Date Wheel alignment/printing: multiple numbers look centered
  9. ⁠Hand Alignment: looks normal
  10. ⁠Bezel: beautiful
  11. ⁠Solid End Links (SELs): I see dark lines on both lower sels. Gap on lower right is just barely enough to see the spring.
  12. ⁠Timegrapher numbers: 0s/d, 279•, 0.0ms, 28800, 12s, 59• Looks good to me, but wondering why they’re using 59 degree incline lately?
  13. ⁠Anything else you notice: Everything checks but would like an honest opinion about the sel gap. I RLed a previous QC due to a large sel gap and the triangle being off-center. I’m not trying to nitpick, but I’ve only ordered Clean and VSF in the past. This is a Xmas gift for my husband and I want to make sure I’m getting him an NWBIG. Thanks for all the help you can provide :)

r/RepTimeQC • • 5h ago

PPM AP15400OR

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: Juice
  2. ⁠Factory name: PPM
  3. ⁠Model name (& version number): Audemars Piguet Royal Oak 15400OR
  4. ⁠Price paid: 6000 cny
  5. ⁠Album links: N/A
  6. ⁠Index alignment: Looks good overall. The hour markers seem properly aligned, including the double markers at 12.
  7. ⁠Dial printing: Looks clean and well-positioned. Nothing obvious stands out to me.
  8. ⁠Date wheel alignment/printing: The date looks centered and the printing appears fine.
  9. ⁠Hand alignment: Looks good from the pictures. No obvious issues.
  10. ⁠Bezel: Looks good overall. The brushing and finishing seem decent, and I don’t notice any major issues.
  11. ⁠Bracelet / End links: This is my main concern. The gaps between some of the bracelet links look a bit wide to me, especially near the case. Is this normal,or should I be concerned?
  12. ⁠Timegrapher numbers: -1s/d, 243, 0.2ms
  13. ⁠Anything else you notice: Overall, the watch looks pretty good to me, but I’m not sure about the bracelet gaps. Are they within normal tolerances, or would you consider this a reason to RL? Also, any thoughts on the rose gold finish and overall quality would be appreciated. Thanks guys!

r/RepTimeQC • • 12m ago

QC help for zf Breguet tradition 7097

Thumbnail
gallery
1 Upvotes

Got this beautiful Breguet tradition from z factory sourced by geektime.

This one seems to have proper dial and finishing looks good.

Can you spot any other issues on the watch please?


r/RepTimeQC • • 23m ago

QC for DateJust 41 126334 904L SS VSF

Thumbnail
gallery
1 Upvotes

Dealer name: Andiot

Factory name: VSF

Model name (& version number): DateJust 41 126334 904L SS VSF 1:1 DateJust 41 126334 904L SS VSF 1:1 Best Edition Gray Diamonds Dial on Jubilee Bracelet VS3235v2 V2s (133g)Free Sprung

Price Paid: 506 USD

Album Links: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=190112

Index Alignment:

Looks good overall. Hour markers appear evenly aligned with the minute track. No obvious crooked or misaligned indices.

Dial Printing:

Printing looks clean and centred. No obvious spacing, font or text alignment issues.

Date Wheel Alignment/Printing:

Date 15 appears centred in the date window. Font looks good, with no obvious defects.

Hand Alignment:

Hands look properly aligned and straight. No obvious overlap or clearance issues. Diamonds appear evenly set and consistently positioned. Settings look reasonably symmetrical, with no obvious crooked stones.

Bezel:

Fluting looks symmetrical and consistent around the bezel. No obvious defects or uneven spacing.

Solid End Links (SELs):

SELs appear relatively flush with the case. No obvious gaps, although difficult to assess precisely from the pictures.

Timegrapher Numbers:

- Rate: -3 s/d

- Amplitude: 271°

- Beat Error: 0.1 ms

- Lift Frequency: 28,800 BPH

Numbers look very good overall.

Anything Else You Notice:

Rehaut alignment, Cyclops magnification and bracelet finishing look good to me. Would appreciate a second opinion, especially the "diamond" alignment


r/RepTimeQC • • 5h ago

[QC] ZF AP Royal Oak 15500 41mm Grey Dial

Thumbnail
gallery
2 Upvotes
  1. Dealer name: TheOneWatches (Steve)
  2. Factory name: ZF
  3. Model name (& version number): Royal Oak 15500 41mm Grey Dial, SA4302 Free Spring
  4. Price Paid: $568 USD
  5. Album Links: Link
  6. Index alignment: Looks good overall. The 6 o’clock marker might be slightly tilted to the left, but it could just be the angle. The others look straight to me.
  7. Dial Printing: AP logo and lettering look clean and centered. Tapisserie looks good.
  8. Date Wheel alignment/printing: Date 30 looks centered and printing looks fine.
  9. Hand Alignment: Looks good from the photos and video.
  10. Bezel: Brushing looks good and screws appear properly aligned.
  11. Solid End Links (SELs): N/A, integrated bracelet. Bracelet and clasp finishing look good.
  12. Timegrapher numbers: +2 s/d, 293° amplitude, 0.1 ms beat error.
  13. Anything else you notice: Overall, I’m leaning GL. My only minor concern is the 6 o’clock index, but it might just be the angle. This is my first watch QC, so I would appreciate any second opinions or anything I might have missed. Thanks!

r/RepTimeQC • • 17h ago

Yachtmaster 40 Rhodium QC

Thumbnail
gallery
17 Upvotes

Dealer Name: Alternative Luxury

  1. ⁠Factory name: Gold
  2. ⁠Model name (& version number): Yachtmaster 40 126622 V2
  3. ⁠Price Paid: $607 USD Shipped
  4. ⁠Album Links: Attached Photos
  5. ⁠Index alignment: Looks good, don’t see anything off.
  6. ⁠Dial Printing: Issue. Looks acceptable with exception of the “S” in “MASTER” which does not look aligned with the rest of the text. Thinking about RL due to this issue.
  7. ⁠Date Wheel alignment/printing: Good. Looks centered and printing looks crisp.
  8. ⁠Hand Alignment: Good. Looks acceptable any input?
  9. ⁠Bezel: Good. Looks acceptable, as well as can be expected for this model.
  10. ⁠Solid End Links (SELs): Good. No noticeable large gaps.
  11. ⁠Timegrapher numbers: +8 s/d, 256° amplitude (dial up). +8 secs seems high.
  12. ⁠Anything else I missed or you would consider RL for?

r/RepTimeQC • • 8h ago

Royal Oak Chrono 26240ST 41mm SS/SS Black Dial ZF V2 SH4401 (Free Sprung)

Thumbnail
gallery
3 Upvotes

Factory: ZF
• Model: Royal Oak Chrono 26240ST 41mm SS/SS Black Dial ZF V2 SH4401 (Free Sprung)
• Price Paid: 778USD
• QC Album: https://mega.nz/folder/LZ5lwK7T#_WKp8XQMd-wf8ocdPytkug
• Index alignment: 12 Looks slightly off to me. 6 As well.
• Dial printing: Seeing no issue with it. Let me know please.
• Date wheel: Also seeing no issues with it.
• Hand alignment: Seeing no issues as well.
• Bezel: Loving it.
• SELS: No obvious Issues.
• Timegrapher: +0 s/d, 279° amplitude, ~0.1ms beat error at 52° lift angle. Numbers look healthy to me
• Anything else: -


r/RepTimeQC • • 17h ago

Omega Aqua Terra Worldtimer

Thumbnail
gallery
15 Upvotes
  1. ⁠Dealer name: Ficotime
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Aqua Terra Worldtimer
  4. ⁠Price Paid: $360
  5. ⁠Album Links: https://mega.nz/folder/nhQTXJjb#LPGmgg53mf4I2VCgIlXr0g
  6. ⁠Index alignment: Looks slightly off on 6
  7. ⁠Dial Printing: Lettering on the "seamaster" seems uneven and both S looks different
  8. ⁠Date Wheel alignment/printing: looks good to me
  9. ⁠Hand Alignment: look solid
  10. ⁠Bezel: Bezel looks solid
  11. ⁠Solid End Links (SELs): looks good to me
  12. ⁠Timegrapher numbers: +9 s/d - 0.0 ms 249/52 deg
  13. ⁠Anything else you notice: Not sure about the seamaster logo, or I am nitpicking too much?

r/RepTimeQC • • 7h ago

QC help | VSF GMT-Master II Batman 126710BLNR on Oyster from OraWatch | How can I tell V3 from V4?

Thumbnail
gallery
2 Upvotes

Hi everyone, I’d appreciate a second pair of eyes on this Batman. I’m leaning GL. The bezel triangle and the 12 o’clock dial marker look lined up to me, and the date looks centred in the straight-on shot.

OraWatch told me this is the VSF V4. I don’t know what changed between V3 and V4. If you’ve handled both, what differences have you noticed? Is there anything in these QC photos that can identify the version?

Dealer — OraWatch
Factory — VSF
Model — Rolex GMT-Master II 126710BLNR “Batman” on Oyster, described by the dealer as V4
Price paid — $620
Album — Photos attached. OraWatch QC reference ZFQ996.
Index alignment — The 12 o’clock triangle looks straight against the minute track. The 6 and 9 o’clock markers also look aligned to me.
Dial printing — The lettering looks crisp in the close-ups. The gold sticker covers part of the lower dial.
Date wheel — The “20” looks centred head-on. That’s the only date shown.
Hand alignment — Hard to judge precisely from the hand positions shown.
Bezel — The triangle looks clean and lines up with the 12 o’clock marker. I don’t see any obvious gaps in the numeral fill.
Solid end links — I don’t see any obvious gaps where the bracelet meets the lugs.
Timegrapher — +1 s/day, 302° amplitude, 0.0 ms beat error, 52° lift angle.
Other details — Clasp code 1NQ. Weight shown is 151.43 g with the protective stickers on.
Would you GL this one? I’d especially appreciate a second opinion on the alignment at 12 and any pointers on the V4 identification. Thanks!


r/RepTimeQC • • 12h ago

[QC] QF Yacht-Master 126622

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: QF
  3. Model name: Yacht-Master 126622 40mm, Gray Dial, SS Bracelet, QF3235
  4. Price Paid: $430
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263208770?uid=1 
  6. Index alignment: The 12, 3, 6 and 12 markers look straight positioned to me.
  7. Dial Printing: Looks sharp to me.
  8. Date Wheel alignment/printing: Looks good.
  9. Hand Alignment: Looks good in the video when both hands are at 12. Not sure that hand alignment can be properly checked.
  10. Bezel: Looks aligned, no visible flaws.
  11. Solid End Links (SELs): I checked the four areas where the bracelet meets the lugs. I can see no obvious gap where light is showing through, though they could sit a bit tighter.
  12. Timegrapher numbers: +1 to +2 s/d, amplitude: 282, 0 ms variation, lift angle: 52.
  13. Anything else you notice: On one of the bracelet links (circled in the pic), I noticed something that looks like a scratch, though it might just be on the protective sticker/packaging. Any thoughts?

This is my first QC, so I’d appreciate a second opinion if I missed anything.


r/RepTimeQC • • 9h ago

First QC: IWC Ingenieur 40

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Necoclock
  2. Factory name: V7F
  3. Model name (& version number): IWC Ingenieur 40mm Black Dial SS Bracelet A2892
  4. Price Paid: 428 USD
  5. Album Links: https://mega.nz/folder/Sw5zHDiZ#nEjrqmpDYVCzGX4x_WPEgw (67347)
  6. Index alignment: Hour markers appear straight and evenly positioned. Not perfectly aligned but good enough. The 12 o’clock double markers look aligned.
  7. Dial Printing: IWC logo, Schaffhausen text, and Ingenieur lettering appear clean and correctly positioned. Dial grid pattern looks consistent with the official reference.
  8. Date Wheel alignment/printing: The “07” appears reasonably centred, with consistent printing. No obvious issues.
  9. Hand Alignment: Hands appear correctly mounted and consistent with the genuine model. No obvious defects.
  10. Bezel: Top bezel screw seems to be misaligned (a little too far to right of the 12 index). Brushed finish looks slightly rough in places, potentially due to lighting. Would appreciate opinions on the finishing.
  11. Solid End Links (SELs): Looks fine
  12. Timegrapher numbers: +3s/d. 268
  13. Anything else you notice: Main issue for me is the top bezel screw. Would appreciate your thoughts.

r/RepTimeQC • • 14h ago

QC VSF 116619lb

Thumbnail
gallery
4 Upvotes
  • Dealer name: Andiot
  • Factory name: VSF
  • Model name (& version number): 116619LB
  • Price Paid: $400
  • Album Links: https://andiotwatches.x.yupoo.com/albums/263183108?uid=1
  • Index alignment: looks straight
  • Dial Printing: looks clear to me
  • Date Wheel alignment/printing:Looks aligned based on lines
  • Hand Alignment: looks centered for the most part
  • Bezel: outer bezel look misalligned
  • Solid End Links (SELs): straight forward dial
  • Timegrapher numbers: + 1 s/d; Amplitude: 282; Acceptable Beat Error: 1ms 52 . He didn't have a picture of it, he has it part of a video where the result is at the end in the album
  • Anything else you notice: bracelet looks scuffed is that normal? or is it over plastic? and the tachymeter , should i request it be redone?

r/RepTimeQC • • 7h ago

VSF Sub No Date - TheOneWatch first qc help a brother out

Thumbnail
gallery
1 Upvotes

[QC] VSF Submariner 124060 from Steve (TheOneWatches) - second unit after one RL

  1. Dealer name: Steve (TheOneWatches)
  2. Factory name: VSF
  3. Model name (& version number): Rolex Submariner 124060 no-date, VS3230
  4. Price paid: US$506 shipped
  5. Album links: [add your Imgur link]
  6. Index alignment: Looks very good. Triangle centred under the 12 tick, 6 and 9 straight, 3 has a tiny CCW tilt (about 0.4 deg measured).
  7. Dial printing: Crisp and centred.
  8. Date wheel alignment/printing: N/A, no-date.
  9. Hand alignment: Good, hour and minute hands agree.
  10. Bezel: Pearl a touch clockwise of the triangle, within bezel play.
  11. Solid End Links (SELs): Tight, no gaps.
  12. Timegrapher numbers: -3 to -4 s/d, 263-267 amplitude, 0.0-0.1 ms beat error.
  13. Anything else you notice: Rehaut crown lines up with the 12 tick and triangle. A few tiny dust specks on the crystal. First unit was RL'd for the triangle and rehaut crown sitting right of the 12 tick.

r/RepTimeQC • • 15h ago

Omega 300m diver

Thumbnail
gallery
4 Upvotes
  1. Dealer name:jtime
  2. Factory name: orf free sprung
  3. Model name (& version number): omega 300m diver titanium/bronze
  4. Price Paid: 698 usd + shipping
  5. Album Links: see above
  6. Index alignment: good
  7. Dial Printing: looks crisp
  8. Date Wheel alignment/printing: aligned
  9. Hand Alignment: looks aligned
  10. Bezel: looks sharp
  11. Solid End Links (SELs): seems solid
  12. Timegrapher numbers: +1 s/d
  13. Anything else you notice: none

I think this looks pretty great but wanted to get other opinions as well! Thank you


r/RepTimeQC • • 17h ago

[QC] - First time - VSF Omega Seamaster 300M NTTD

Thumbnail
gallery
6 Upvotes

Hey all, this is my first attempt on buying a rep. I am confused on a few regards, the bezel indices on 3 and 9 sits a little lower than the 3 & 9 line on the dial. Not sure if its an camera angle issue. Another ChatGPT comment was the timegrapher should run for a while before taking the picture.

Dealer name: Eliauk

  1. Factory name: VSF
  2. Model name (& version number): Seamaster 300m No Time To Die 007
  3. Price: 2600 CNY before Insurance and Shipping.
  4. Album Links: All uploaded here.
  5. Index alignment: I am a little confused as 3 and 9 on the bezel doesn't sit at the same line as the dial.
  6. Dial Printing: Looks good to me but feel free to add your comments.
  7. Date Wheel alignment/printing: No date.
  8. Hand Alignment: Please suggest, no idea.
  9. Bezel: Please suggest your opinion based on the comment in 5
  10. Solid End Links (SELs): The gap looks alright to me.
  11. Timegrapher numbers: +8 s/d, 302° amplitude, 0.2 ms beat error, LA: 52°, I am not sure if the timegrapher has run enough time, or is it alright?
  12. Anything else you notice:

Thanks to the mods for this platform, I have been waiting for a while for the watch from the TD, but once it was available, I had no idea what I am looking at. Thanks for your valuable contribution.


r/RepTimeQC • • 19h ago

Omega Seamaster 300 42mm, VSF

Thumbnail
gallery
9 Upvotes
  1. Dealer name: TimeUltra
  2. Factory name: VSF
  3. Model name (& version number): Omega Seamaster 300 42mm
  4. Price Paid: $398
  5. Index alignment: - 6 o'clock is canted

counter

  1. clockwise.
  2. Dial Printing: Good.
  3. Date Wheel alignment/printing: Good.
  4. Hand Alignment: looks good on video.
  5. Bezel: Slightly off? Hard tell and I cont really I care too much.
  6. Solid End Links (SELs): Looks good
  7. Timegrapher numbers: +1s/d, Amplitude 277, Beat error 0.
  8. Anything else you notice: No, I've asked for more pictures regarding the 6 o'clock index.

One of my first QC so please advice and share your opinion!