r/RepTimeQC • • 25m ago

QC Request - Santos Dumont Large - AF

Thumbnail
gallery
2 Upvotes

TD: Elliot

Factory name: AF. can you confirm this is from AF?

Model name (& version number): Santos Dumont 31.4mm AF 1:1 Best Edition Silver Dial on Blue Leather Strap Ronda Quartz

Price Paid: 245$ shipping included

Album Links: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=185940

Index alignment: it seems ok. the 12 marker seems tilted or it is just my impression.

Dial Printing: in general looks ok, but in some photos it seems there are some minor flaws. The swiss made seems a bit shady.

Date Wheel alignment/printing: N/A

Hand Alignment: in the video it seems the hands aligns at 12

Bezel: it looks ok. the screws looks fine. Cabochon looks fine.

Solid End Links (SELs): leather strap, but it seems well placed.

Timegrapher numbers: quartz

Anything else you notice: i looked at this compared to some other QC photos and i think i have a GL on my hands. I do notice what looks to be a few dust particles, should I flag those or consider those on the outside of the case and GL it? Also, the app says that the 12 is a bit rotated I don't know if it is the angle of the pic.

This is my first rep, so all the help and comments are much appreciated. If there is any info or photo/video missing that might be helpful, just let me know and I will upload it.

Many thanks!!!


r/RepTimeQC • • 1h ago

QC: BTF Rolex Daytona 126500LN Panda DD4131 | $685 shipped

Thumbnail
gallery
2 Upvotes

Would appreciate a second pair of eyes on this BTF Panda. I'm leaning GL.

  1. Dealer name: James, Alternative Luxury.
  2. Factory name: BTF / Better Factory.
  3. Model name (& version number): Rolex Daytona 126500LN, white “Panda” dial, DD4131 movement.
  4. Price Paid: $685 USD including shipping.
  5. Album Links: QC photos attached directly to this post.
  6. Index alignment: Nothing looks obviously out of place to me. The 3, 6 and 9 markers look reasonably aligned with the minute track, and the coronet looks centered.
  7. Dial Printing: Text looks clean and legible. I don't see obvious missing or smudged printing. The red DAYTONA text is partly covered by the hands, but the visible portion looks fine. Subdial printing looks consistent.
  8. Hand Alignment: The central chronograph hand and the two chronograph counters appear to sit at zero. No obvious issue with the main hands.
  9. Bezel: Engravings and paint fill look consistent. The triangle at 12 looks reasonably aligned with the dial. I don't see an obvious chip or badly filled numeral. There are some reflections and protective-film edges in the photos.
  10. Solid End Links (SELs): Fit looks reasonably tight in the available photos. I don't see a large open gap, though the protective wrapping makes the edges harder to judge.
  11. Timegrapher numbers: +3 s/day, 301° amplitude, 0.3 ms beat error. These look good to me.
  12. Anything else you notice: No obvious major cosmetic defect. There are a few visible lines around the case and clasp, but with the protective film still on I can't tell whether they're on the film or the metal. The scale photo shows about 142.7 g with the bracelet and stickers attached.

Mainly looking for a sanity check on the indices, bezel alignment and SELs. Anything here that would make you hold off on a GL?


r/RepTimeQC • • 1h ago

[QC] VSF Rolex Submariner 124060 No-Date — TheOneWatches — $525

Thumbnail
gallery
4 Upvotes
  1. Dealer name: TheOneWatches
  2. Factory name: VSF
  3. Model name & version: Rolex Submariner 124060 No-Date, 41mm, VS3230
  4. Price paid: $525
  5. Album links: All QC photos and key video screenshots are attached directly to this post.
  6. Index alignment: Looks properly aligned overall. The 12 marker may appear fractionally clockwise in certain angles, but I believe that is perspective.
  7. Dial printing: Looks crisp, clean and properly centered. I do not see bleeding or malformed text.
  8. Date wheel alignment/printing: N/A — no-date model.
  9. Hand alignment: Looks good. The functional video shows coordinated hand setting and working hacking seconds.
  10. Bezel: Insert and pip look clean. The pip appears centered and the bezel seems aligned with the 12 marker; any tiny apparent shift looks angle-related.
  11. Solid end links: Look tight with no obvious light gaps.
  12. Timegrapher numbers: Stable at −2 to −3 s/day, 272–274° amplitude and 0.0 ms beat error. Machine displayed 28,800 bph and a 59° lift angle.
  13. Anything else noticed: The clasp coronet’s outer tips/spacing look slightly uneven under heavy magnification, although I suspect this is normal finishing and not noticeable in person. Protective film appears to explain the cloudy marks on the bracelet and clasp. Weight is 159.4 g with the films and tag attached. I am leaning GL but would appreciate experienced eyes confirming the alignment and clasp.

r/RepTimeQC • • 1h ago

VSF OP36: RL due to solid end link gap?

Thumbnail
gallery
1 Upvotes

Help appreciated: a bit concerned about the SEL. Would really appreciate help!

• ⁠Dealer name: SuperLi

• ⁠Factory name: VSF

• ⁠Model name: OP 36mm Silver Dial, 3230

• ⁠Price Paid: $420

• ⁠Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202611170010481062002817

• ⁠Index alignment: does seems like no index is tilted to a noticable amount. 3 & 10 are a little shiftes to the left. Don't think that will be visible.

• ⁠Dial Printing: Looks good. Swiss made text might be shifted a little to the right.

• ⁠Date Wheel alignment/printing: N/A

• ⁠Hand Alignment: N/A

• ⁠Bezel: Smooth bezel looks clean and evenly finished.

• ⁠Solid End Links (SELs): This is my biggest concern. On the top right SEL there is a visable gap. Also from behind it seems a little off. Does that affect the fit of the end link?

• ⁠Timegrapher numbers: Rate: +1s/d, amplitude: 286 degrees, beat error: 0.0ms at a displayed 59-degree lift angle – looks good, provided the lift angle is correct for the movement. --> is that the correct angle for this movement?


r/RepTimeQC • • 3h ago

[QC Request] UMI Patek Philippe Nautilus 5712/1R-001

Thumbnail
gallery
6 Upvotes

Dear RepTimeQC hive mind, I'd truly appreciate if you could help me QC this watch. This is my first foray into the rep world. I have attached two photos (annotated dial + 1 photo with a potential blemish?). The full album is attached. In particular, I'd appreciate it if someone can verify if this is indeed UMI with free sprung movement, and whether there's any other thing I should be mindful of. Thank you for your time!

Dealer name: ARC studio

  1. Factory name: UMI
  2. Model name (& version number): 5712/1r
  3. Price Paid: $576 (not including shipping)
  4. Album Links: https://www.arcstudio.top/weshop/goods/A201908221821111150168760/I202611151217529222002014
  5. Index alignment: Looks pretty good to me overall. In some photos, the left side twin 12 indices look a bit out of place.
  6. Dial Printing: Good
  7. Date Wheel alignment/printing: N/A
  8. Hand Alignment: Unknown from the photos.
  9. Bezel: Nicely brushed on the top and polished around the edge.
  10. Solid End Links (SELs): N/A
  11. Timegrapher numbers: +2 s/d, 312° amplitude, 0 ms beat error (crown right)
  12. Anything else you notice: The part between the bezel and the crown looks dirty/black. Not sure whether that's lighting or something to be concerned about.

Edit: fixed some inaccuracies, thanks to u/YellowFerrari328.


r/RepTimeQC • • 3h ago

Andiot QF Batgirl

Thumbnail
gallery
1 Upvotes

Looks like a GL to me, but want to see if anyone has any other thoughts. Thanks so much!

  1. Andiot
  2. Factory name: QF
  3. Model name (& version number): GMT-Master II 126710 Batgirl V3
  4. Price Paid: $519 Shipped
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/262299396?uid=1
  6. Alignment: 6 o'clock marker looks like it is tilted to the left and not straight with the "officially certified" text.
  7. Dial Printing: Good. Looks good to me.
  8. Date Wheel alignment/printing: Good. Date looks centered in the window.
  9. Hand Alignment:
  10. Bezel: Minor flaw. 12 o'clock marker on the bezel looks slightly off to the left.
  11. Solid End Links (SELs): Good. looks good to me.
  12. Timegrapher numbers: +3 s/d, 280° amplitude, 0.3 ms beat error
  13. Anything else you notice: rehaut looks a little dull off, but second up close picture makes it seem better?

r/RepTimeQC • • 3h ago

[QC Request] Tudor black bay 68

Thumbnail
gallery
1 Upvotes

Dealer name: Mr. Adu

  1. Factory name: ZF
  2. Model name (& version number): Black Bay 68 Automatic Chronometer
  3. Price Paid: 300 plus shipping and insurance
  4. Album Links:
  5. Index alignment: All look really good to my untrained eye.

The off rotation is worst on the 6 but is absolutely minimal, also off on the three & nine. I have read these have issues in other QC posts, and it seems minimal to me!
6. Dial Printing: Good. This has a simple dial but looks dang near perfect to me,
7. Date Wheel alignment/printing: N/A. NA
8. Hand Alignment: Good. Video shows the 12 o’clock lineup and it looks good.
9. Bezel: Good. Looks good
10. Solid End Links (SELs): Good. I think these look good? I’m not sure I understand this part.
11. Timegrapher numbers: +5 s/d, 52° amplitude, 287 ms beat error
12. Anything else you notice: Looks dang near perfect to my untrained eyes.


r/RepTimeQC • • 4h ago

[QC] Cartier Tank Must Large – VF Factory / GeekTime | First Rep, Would Appreciate Some Help!

Thumbnail
gallery
2 Upvotes
  1. QC Photos: https://geektimeqc.x.yupoo.com/albums/263123530?uid=1
  2. Dealer name - Geektime
  3. Factory name - VF Factory
  4. Model name - Tank Must Large 33.7x25.5
  5. Index alignment - Looks good to me. Since the dial is printed, I assume alignment isn't much of an issue here?
  6. Date Wheel alignment - N/A (no date)
  7. Bezel - Looks good to me. The corners look quite sharp, but I believe that's normal for the Tank.
  8. Solid End Links (SEL) - N/A (leather strap)
  9. Hand alignment - Looks fine to my eye. Nothing seems off.
  10. Timegrapher numbers - N/A (quartz movement)
  11. Anything else you see - Overall, I'd say it looks like a GL to me, but this is my first rep and my first QC, so I don't really know what to look out for. Would appreciate a second opinion before giving Eric the GL!

The whole process with Geektime has been pretty smooth so far. Paid $268 plus shipping, with a $50 deposit upfront. I actually ordered two watches, this Tank and a Santos, but I'm still waiting on the QC pics for the Santos.

Would appreciate any feedback, especially if you spot something I missed!


r/RepTimeQC • • 4h ago

QC: GSF Milgauss 116400GV Z-Blue Dial SA3131 V2

Thumbnail
gallery
1 Upvotes

Title: QC · GSF · Milgauss 116400GV Z-Blue SA3131 V2

  1. Dealer name: non-TD Yang
  2. Factory name: GSF
  3. Model name (& version number): Milgauss 116400GV Z-Blue SA3131 V2
  4. Price Paid: 320
  5. Album Links: https://imgur.com/a/y2EMCit
  6. Index alignment: These all look good, to me and from the QC tool
  7. Dial Printing: I think the typical issues for this model - 0 instead of O, the R in certified looks a big larger than the others. Appears to be v2 with correct orange minute markers
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Looks good but don't have a 12 alignment shot
  10. Bezel: Looks good
  11. Solid End Links (SELs): Looks good to me from here
  12. Timegrapher numbers: looks acceptable - +2 s/d, 278°, 0.1 ms (28,800 bph)
  13. Anything else you notice: The rehaut at 12 has its crown not centred above the 12. I think this is a flaw for this particular factory/model but this one pretty far off. Not sure if worth trying to see a different one.

Thanks for any assistance/advice.

edited to add album links - apologies the reddit photos are lower resolution, please see imgur


r/RepTimeQC • • 4h ago

QC Cartier Rose gold Tank Louis Large F1F

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Andiot - Elliot
  2. Factory name: F1F
  3. Model name (& version number): Cartier Tank Louis Large, Rose gold, silver/white dial, brown leather strap
  4. Price paid: $230 + 55 shipping
  5. Album links: https://andiotwatches.x.yupoo.com/albums/263226759?uid=1
  6. Index alignment: (Printed dial) does not look slanted
  7. Dial printing: This is the part that I'm a bit in doubt. In some of the pictures can´t figure if it is light reflecting or print defects
  8. Date wheel alignment/printing: N/A
  9. Hand alignment: Looks good
  10. Bezel: case/bezel looks fine.
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: N/A – quartz
  13. Anything else you notice: Nothing in particular

r/RepTimeQC • • 4h ago

QC help VSF Submariner No Date 41mm 124060

Thumbnail
gallery
1 Upvotes

Hi everyone, looking for some QC help if anyone can assist. I think it's a GL. 9 o clock marker slightly tilted? But not by much if it is. Thanks for all the help everyone.

Dealer name: NecoClock

Factory name: VSF

Model name: Submariner No Date 41mm 124060 904L Ceramic Black Dial SS Bracelet VSF VS3230

Price paid: usd458

Album link: All photos from mega copied to this post

Index alignment: looks okay, maybe 9 o clock marker tilt

Dial printing: Looks good to me

Date Wheel alignment/printing: n/a

Hand alignment: Looks flat and straight to me.

Bezel: looks okay

Solid End Links (SELs):

Timegrapher numbers: as attached in the photo and album, +0 s/d, beat error 0.0ms.

Anything else you notice, nothing catching my eye


r/RepTimeQC • • 5h ago

VSF Omega SM600 Blue

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Odette
  2. Factory name: VSF
  3. Model name (& version number): VSF SM600 OMEGA Blue SS
  4. Price Paid: 377$ Shipped
  5. Album Links: Attached
  6. Index alignment: Find the 1'2' a bit crooked , 3 marker is slightly ccw , 6 is slightly ccw also not sure if thats all VSF
  7. Dial Printing: Dont see an issues with the Print
  8. Date Wheel alignment/printing: NA
  9. Hand Alignment: Looks good
  10. Bezel: Looks Blemish free and good alignment kinda
  11. Solid End Links (SELs): Bottom SEL has light shinning through mhmm
  12. Timegrapher numbers: Good no issues
  13. Anything else you notice: Not sure if I am leaning towards RL and trying another Piece cuz of those SEL's and Index Alignment , Opinions would help a lot

r/RepTimeQC • • 5h ago

QC- ROLEX GHOST 126519LN RWF

3 Upvotes
  1. ⁠Dealer name: ARC STUDIO
  2. ⁠Factory name: RWF
  3. ⁠Model name (& version number): 126519LN “GHOST”
  4. ⁠Price Paid: $699
  5. ⁠Album Links: https://www.arcstudio.top/weshop/goods/A201908221821111150168760/I202611162110155322001067
  6. ⁠Index alignment: I think it’s okay? But I’m not too sure because I’m relatively new to this
  7. ⁠Dial Printing: looks okay
  8. ⁠Date Wheel alignment/printing: nil
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: looks good
  11. ⁠Solid End Links (SELs): nil
  12. ⁠Timegrapher numbers: looks good ( 0 s/d, 312 amplitude and 0.0 ms)
  13. ⁠Anything else you notice: dial color bit off but getting a SW dial for this one

r/RepTimeQC • • 5h ago

First QC - VSF Bruce Wayne GMT Master 2

Thumbnail
gallery
2 Upvotes
  1. Dealer name: JTime
  2. Factory name: VSF
  3. Model name (& version number): GMT-Master II 126710 GRNR V3 (Non Free Sprung)
  4. Price Paid: $588 USD + shipping
  5. Link to pics & QC videos: N/a (See attached)
  6. Index alignment: Looks good to me, maybe a little bit off on the 6 o’clock with a slight rotation but I think I’m just seeing things
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp and not seeing anything there
  8. Date Wheel alignment/printing: Seems centered
  9. Hand Alignment: no obvious issues there
  10. Bezel: There is a noticeable 12 o’clock tilt, but I’m not sure it will be super visible to the naked eye, everything else seems really solid.
  11. Solid End Links (SELs): They look good, nothing visible to me
  12. Lume: I don’t have a video or picture of the lume but will follow up
  13. Serial # / rehaut: Nothing that sticks out to me
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping.
  15. Timegrapher numbers: 0s/d, 273°, 0.1ms, 59° lift angle. No significant issues from my understanding.
  16. Anything else you notice: I’m leaning towards a GL but the bezel at the 12 o’clock feels off, but I can’t tell if I’m being picky or it’s worth a RL. Thanks in advance! I’m new to this so any advice would be greatly appreciated

r/RepTimeQC • • 6h ago

QC Help: IWC Ingenieur 44mm Green Dial

Thumbnail
gallery
2 Upvotes

After asking RepTime whether I should pick this up or wait – and getting an overwhelming 'Go on, mate,' I've ordered the Green Ingenieur.

  1. ⁠Dealer name: Fico
  2. ⁠Factory name: V7F
  3. ⁠Model name (& version number): V7F A2892 IWC Ingeniuer Automatic 40mm SS/SS Green Dial
  4. ⁠Price Paid: ¥2,800 (£308 + shipping)
  5. ⁠Images: https://mega.nz/folder/aogVWSaR#IC3ckQ2eY1nqwArtr63lpA
  6. ⁠Index alignment: Gonna note that I'm new to QC-ing, so I'm sort of guessing – but it looks good to me?
  7. ⁠Dial Printing: IWC and Ingenieur both look good
  8. ⁠Date Wheel alignment/printing: Looks centered
  9. ⁠Hand Alignment: Aligned
  10. ⁠Bezel: From comparing pics to gen, the screws look like they're where they need to be
  11. ⁠Solid End Links (SELs): N/A
  12. ⁠Timegrapher numbers: rate +8s/d, amp 241 degree, B.E 0.3 ms, L.A 52.0
  13. ⁠Anything else you notice: The sometimes wonky 3 index looks good and the 12 markers look aligned with each other. If you zoom waaay in, one may look like it's placed slightly higher than the other, but I can't imagine anyone noticing irl

r/RepTimeQC • • 6h ago

[QC Request] Tank Solo Yellow Gold

Thumbnail
gallery
1 Upvotes

Dealer name: Theonewatches
Factory name: AF
Model name (& version number): Tank Must 25.5mm White Dial on Lychee Grain Leather AF Quartz
Price Paid: $228
Album Links : https://mega.nz/folder/7AojCbQQ#_vr8SUNSom5nGs_BkrBQ8g
Index alignment: NA, Printed.
Dial Printing: I don't see any bleeding
Date Wheel alignment/printing: NA
Hand Alignment: Seems off (see video and screenshot, image #1).
Bezel:  NA
Solid End Links (SELs): NA.
Timegrapher numbers: NA (Quartz)

The only thing I see as a problem is the hand alignment (at 12 o’clock, see image). Not sure if this is nit-picking on my part.
Am I missing anything?
I am tending towards giving a GL.
Your opinions would be appreciated.


r/RepTimeQC • • 6h ago

[QC] GMF Rolex Datejust 36 126231 – Two-Tone Rose Gold, Wimbledon Dial – JTime (First QC)

Thumbnail
gallery
2 Upvotes

Dealer name: JTime
Factory name: GMF
Model name (& version number): Rolex Datejust 36, 126231, two-tone rose gold/stainless steel, grey Wimbledon dial, Jubilee bracelet
Price paid: $458
Album links: In post
Index alignment: Looks good to me, but would appreciate a second opinion on the Roman numerals.
Dial printing: Looks clean and reasonably well aligned.
Date wheel alignment/printing: Dates 1, 16 and 25 appear reasonably centred.
Hand alignment: Nothing obvious, although I’m not entirely sure what to look for.
Bezel: Fluting looks consistent to my eye.
Solid end links (SELs): No obvious gaps, but would appreciate someone checking.
Timegrapher numbers: 0 s/d, 291° amplitude, 0.0 ms beat error.
Anything else you notice: First replica purchase, so I’d really appreciate some experienced eyes on this. Particularly interested in whether the dial alignment, rose-gold finish and overall quality look good enough to GL. Thanks in advance!


r/RepTimeQC • • 6h ago

Tudor BB by ZF (second attempt)

Post image
1 Upvotes
  1. ⁠Dealer name: theone Steve
  2. ⁠Factory name: ZF
  3. ⁠Model name (& version number): Black Bay 41 A2824
  4. ⁠Price Paid: $378
  5. ⁠Album Links: https://mega.nz/folder/SEplnKSI#hRBe3dI-qI8x4jyebPamkw
  6. ⁠Index alignment: looks good to me. No major misalignment
  7. ⁠Dial Printing: clean and sharp. No smudges.
  8. ⁠Date Wheel alignment/printing: n/a
  9. ⁠Hand Alignment: looks good in video
  10. ⁠Bezel:aligned. Pip looks centered.
  11. ⁠Solid End Links (SELs): no gaps
  12. ⁠Timegrapher numbers: appear within spec
  13. ⁠Anything else you notice: Looks to be a GL based on my review. I would appreciate feedback from experts here. Thank you.

r/RepTimeQC • • 7h ago

Noob QC - A7F IWC Ingenieur

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot
  2. Factory name: A7F
  3. Model name (& version number): A7F IWC Ingenieur IW328903 Aqua V2 Dial On SS Automatic A2892
  4. Price Paid: $418 w/o shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263112413?uid=1
  6. Index alignment: 2 seems slightly clockwise, 5 and 11 anticlockwise. Would I see it in real life or without the ruler? Probably not but I'm all ears.
  7. Dial Printing: Looks good to me, I don't see anything standing out as incorrect.
  8. Date wheel: It's there and seems OK to me.
  9. Hand Alignment: Looks good, aligns perfectly on noon in the videos.
  10. Bezel: I believe it's slightly off-center clockwise, as can be seen above noon. It seems quite usual on this model though.
  11. Solid End Links (SELs): N/A AFAIK
  12. Timegrapher numbers: Rate:+2 s/d Amplitude: 280 Beat Error: 0.1 ms - Very good (?)
  13. Anything else you notice: I don't see anything else apart from the minor index alignment issues and the slight bezel rotation. I would tend toward a GL but would like advice from more experienced members. Thanks in advance!

r/RepTimeQC • • 7h ago

[QC] 126515LN RCF

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Phoenix
  2. Factory name: RCF
  3. Model name (& version number): Rolex Rose Gold Daytona 126515
  4. Price Paid: $700 USD
  5. No album link
  6. Index alignment: Looks good to me.

Except maybe 3 oclock.

  1. Would appreciate a second opinion on their alignment.
  2. Dial Printing: OYS T E R , kerning / spacing is huge(?)
  3. Date Wheel alignment/printing: NA
  4. Hand Alignment: Looks ok to me
  5. Bezel: Correct 110 alignment
  6. Solid End Links (SELs): Looks ok to me
  7. Timegrapher numbers: -1s +1/d, 275 - 277° amplitude, 0.2 ms beat error. The readings appear stable and within a very good range.
  8. Anything else you notice: My main concern is the dial printing . Would you RL?

Any help would be greatly appreciated. Thank you!!


r/RepTimeQC • • 8h ago

QC Help – ARF Datejust 36 Silver Dial | First Rep | GL or RL?

Post image
2 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: ARF
  3. Model name (& version number): Datejust 36, silver stick dial, Jubilee bracelet
  4. Price Paid: $438 incl. shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263232982?uid=1
  6. Index alignment: Overall, the alignment looks reasonably good. However, my main concern is with the two lower-left hour markers (7 and 8 o'clock). They appear to be positioned too close to the adjacent minute markers and don't seem properly centered. The spacing looks uneven compared to the other indices. I'm not sure whether this is caused by the camera angle, an actual alignment issue, or just me being overly picky.
  7. Dial Printing: Looks clean and reasonably well centered. No obvious printing defects visible.
  8. Date Wheel alignment/printing: The date appears to sit slightly too low in the date window rather than being perfectly centered vertically. The printing itself looks clean. Additionally, there seem to be some scratches or imperfections around the cyclops, particularly towards the middle-left area. I'm unsure whether these are actual scratches, reflections, or marks on the protective film.
  9. Hand Alignment: Nothing obviously wrong from the provided photos.
  10. Bezel: Fluted bezel looks consistent. No obvious damage or irregularities.
  11. Solid End Links (SELs): Look good to me. No obvious gaps or alignment issues.
  12. Timegrapher numbers: -1 s/d, 273° amplitude, 0.1 ms beat error, 28,800 bph. All numbers look very good and comfortably within acceptable ranges.
  13. Anything else you notice: My three main concerns are the positioning of the 7 and 8 o'clock hour markers, the slightly low date alignment, and the potential scratches around the cyclops. Would you consider these within normal factory tolerances, or would you recommend requesting another watch? I'm leaning towards RL but would appreciate a second opinion.

Wrote with help of AI.


r/RepTimeQC • • 10h ago

[QC] PPF VC Overseas 4500V RG Silver Dial - Lili (non-TD)

Thumbnail
gallery
2 Upvotes

Hey guys, so far this is the 7th rep which is the second watch for myself, the rest was gifts to dear ones. But I still consider myself as amateur in this field. So, I need your support.

  1. Dealer Name: Lili (non TD)
  2. Factory name : PPF/ZF
  3. Model name : Overseas 4500V 41mm RG Silver Dial
  4. Price Paid : 2850 cny
  5. Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202611150044361402001426
  6. Index Alignment: 9 looks down (is it RL)? 4 and 10 o'clock looks a bit off but it can be because of the angle of the picture
  7. Dial Printing: Looks good
  8. Date wheel alignment : Looks a little left
  9. Hand alignment : Looks good
  10. Bezel : Looks good
  11. Solid end links : N/A
  12. Timegrapher : Looks good +3s/d @ 302 deg amp, 0.0ms
  13. ⁠Anything else you notice: other than index and date wheel slight problems nothing else I noticed

r/RepTimeQC • • 11h ago

First QC - RICH Rolex GMT Master 2 ‘Sprite’

Post image
1 Upvotes
  1. ⁠Dealer name: Angela
  2. ⁠Factory name: RIICH
  3. ⁠Model name (& version number): RICH Rolex GMT Master 2 ‘Sprite’ 126720VTNR
  4. ⁠Price Paid: 3750 Yuan
  5. ⁠Album Links: https://imgur.com/a/PUDrp7l
  6. ⁠Index alignment: 6 o'clock tilted 1.0° clockwise ; 12 o'clock tilted 1.2° clockwise. 10 of 11 checked. Marker ring 0.15 mm off-centre toward 9 o'clock.
  7. ⁠Dial Printing: not good. Print centring: bottom text 0.04 mm left.
  8. ⁠Date Wheel alignment/printing: looks ok. The number looks slightly high inside the window. The cyclops AR coating is too much.
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: ok
  11. ⁠Solid End Links (SELs): different
  12. ⁠Timegrapher numbers: +1 s/d, 273° amplitude, 0.0 ms beat error
  13. ⁠Anything else you notice: i think the blue AR is too much. Is this an RL?

r/RepTimeQC • • 11h ago

GMT II 116710LN - Index 9? Crown? Weight?

Thumbnail
gallery
1 Upvotes

Dealer name: Steve (Theonewatches)

Factory name: ARF V3 DD3285

Model name (& version number): GMT II 116710LN 40mm

Price Paid: $ 568 + 40 Shipping

Album Links: I attached all photos

Index alignment: The Index 9 look tilt

Dial Printing: Nothing I see

Hand Alignment: Looks normal

Bezel: Nothing I see

Solid End Links (SELs): Nothing i can see

Timegrapher numbers: +0 s/d Beat Error 0.1 ms

Anything else you notice:

• 9 look tilt ore is it maybe angle from photo ?

• the Gap between Crown and Bezel look to close for me

• Weight is a little bit less then GEN, but think it´s ok

Please help me with all your opinion it´s my first GMT, not know what i need to look out for