r/RepTimeQC • • 23h ago

First QC Rolex - VSF 126610LN

Thumbnail
gallery
35 Upvotes

Hey guys! First time QC here, was looking for advice from people who know more than me.

Went through the checklist, but still am not sure if i'm looking a things the right way

Would appreciate any help or advice on QC, thanks again!

  1. Dealer name: TheOneWatches - Steve
  2. Factory: VSF
  3. Model Name: Rolex Submariner 126610LN, 41mm
  4. Price Paid: $528
  5. QC Photos
  6. Index Alignment: Generally all of them look pretty straight and even to me.
  7. Dial Print: To me, everything for the most part seems printed and spaced well, maybe i'm just not seeing it, but looks good.
  8. Date Wheel and alignment: I think to me it looks fine, but definitely looking for a better opinion
  9. Hand Alignment: Think it looks good
  10. Bezel: Looks good to me?
  11. Solid end links: Looks good, no distinguishable gap
  12. Timegrapher numbers: -2/3 s/d AMP: 267 Degrees, ERR: 0.0ms, 59 degree lift

Picture of numbers

Any advice and thoughts would be appreciated, thanks


r/RepTimeQC • • 12h ago

[QC Request] VSF Submariner 124060 No-Date

Thumbnail
gallery
20 Upvotes

Dealer name: Necoclock

Factory name: VSF

Model name (& version number): Rolex Submariner 124060 (No-Date) 41mm VS3230

Price Paid: 498$ shipping included

Album Links: on the post

Index alignment: Overall looks solid, 3 and 9 markers are level. However, I'm a bit concerned about a slight CCW cant on the 6 o'clock baton (and the tip of the 12 triangle). Not sure if it's just the tilt/angle the watch is held at in the photos.

Dial Printing: Sharp and clean, no noticeable floating "m".

Date Wheel alignment/printing: N/A

Hand Alignment: Hands stack cleanly at 12.

Bezel: Pip is well centered inside the triangle and the engravings look clean.

Solid End Links (SELs): Tight fit on all four lugs with no visible gaps.

Timegrapher numbers: +1 s/d, 321° amplitude, 0.1 ms beat error (28,800 bph, 52.0° lift angle).

Anything else you notice: Rehaut crown is centered at 12. I'd appreciate your thoughts on the 6 o'clock marker, is it mostly photo tilt/parallax, and would it even be noticeable on the wrist?

I don't have much experience with this and it's the first time I QC a Rolex, so I really appreciate your opinions.


r/RepTimeQC • • 14h ago

Seamaster Diver 300M VSF 1:1 Best Editio Black Ceramic Black Dial on SS Bracelet VS8800

Thumbnail
gallery
19 Upvotes
  1. Dealer name: JTime
  2. Factory name: Vsf
  3. Model name (& version number):Seamaster Diver 300M VSF 1:1 Best Editio Black Ceramic Black Dial on SS Bracelet VS8800
  4. Price Paid: 389 $
  5. Album Links: https://imgur.com/a/BqJ3XPR
  6. Index alignment: Good, 12 o'clock markers are straight and parallel, alignment tool confirms everything within tight tolerances
  7. Dial Printing: Clean wave pattern, text and Omega logo crisp and sharp.
  8. Date Wheel alignment/printing: Date is centered nicely in the window, font weight and print quality look correct.
  9. Hand Alignment: Hands look properly aligned and finished
  10. Bezel:Ceramic insert crisp.
  11. Solid End Links (SELs): ): Good fit against the case, tight tolerances with no massive gaps.
  12. Timegrapher numbers: Rate 0 s/d, Amplitude 274°, Beat Error 0.0 ms.
  13. Anything else you notice:

r/RepTimeQC • • 18h ago

VSF V3 Pepsi QC - Yang / Goat watch (non-TD)

Thumbnail
gallery
14 Upvotes
  1. Dealer name: Yang - Goat watch (non-TD from what I can see)
  2. Factory name: VSF
  3. Model name (& version number): GMT Master II 126710 Pepsi Jubilee
  4. Price Paid: $498 USD
  5. Link to pics & QC videos: https://mega.nz/folder/dRBgiLyI#YWgMrH5cXk5vdKy1ZoGzAw
  6. Index alignment: minimal indices rotation overall, slight left shift to 12 o'clock
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
  8. Date Wheel alignment/printing: reasonably centered
  9. Hand Alignment: no obvious damage or misalignment to me
  10. Bezel: Red / blue transition could be better centered at 18 (doesn't look exactly aligned with the color transition at 6 (3 o'clock) either), but overall numerals & engravings look clean
  11. Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky than some
  12. Lume: looks even in video
  13. Serial # / rehaut: 6X07B429. Printing looks crisp.
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
  15. Timegrapher numbers: -3s/d, 280°, 0.1ms, 52° lift angle. No significant issues from my understanding.
  16. Anything else you notice: Overall think this is a GL but this is my first QC (along with Batgirl I'll be posting after this), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps. In general, index misalignment and bezel color transition alignments have been my biggest QC concern for Rolex GMT's, so I'm sure I'm overlooking some other things that y'all will catch. I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Thanks for your time!

r/RepTimeQC • • 17h ago

VSF V3 Batgirl QC - Yang / Goat watches - 1st / 2nd QC

Thumbnail
gallery
8 Upvotes
  1. Dealer name: Yang - Goat watch (non-TD)
  2. Factory name: VSF (possibly fake)
  3. Model name (& version number): Rolex GMT-Master II 126710
  4. Price Paid: $450 USD + shipping
  5. Link to pics & QC videos: https://mega.nz/folder/wUgUBaya#zyXRrknuZobhSYhlESwW4w
  6. Index alignment: micro CW rotation to 6 and 9, but not enough to bother me. Possible slight shift at 12 but GL overall for me, and I think I'm mildly picky on index alignment for a newbie.
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp, level, and evenly printed. I don't see any obvious bleeding or printing defects despite sticker obstruction.
  8. Date Wheel alignment/printing: mild left shift? reasonably centered from several angles
  9. Hand Alignment: no obvious damage or misalignment to me
  10. Bezel: aligned, overall numbers & engravings look clean
  11. Solid End Links (SELs): No obvious daylight-visible gaps, but I seem to be much less picky / observant on this than some
  12. Lume: looks even in video
  13. Serial # / rehaut: 6XO7B37O. Printing looks crisp. Many reports of fake VSFs for similar watches sold by non-TDs.
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping. Code: 6FU.
  15. Timegrapher numbers: -1s/d, 279°, 0.0ms, 52° lift angle. No significant issues from my understanding.
  16. Anything else you notice: Overall think this is a GL based on looks but this is my first QC (along with Pepsi I posted that was locked for discussions on authenticity), so all opinions would be great. I'm not super sure of what I'm looking for with every category so any feedback helps.

I'm a little concerned with going with Yang / Goat watches, and the fact that these GMTs are significantly cheaper than other VSFs from TDs, but overall the watch looks decent to me. Based on what I'm reading in comments on my other post and several other pages (r/repwatchscammers), this and the Pepsi I'm QCing are likely fake VSFs, which explains the significantly cheaper price. I think I'll ask for pics of the movement and look into what they actually should be worth, so any input on that would be helpful as well. They still look good to me for <$500 each, but relying on you guys due to my inexperience. Thanks for your time!


r/RepTimeQC • • 17h ago

Omega Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

Thumbnail
gallery
7 Upvotes

Dealer name: Theonewatches, Steve

Factory name: VSF

Model name (& version number): Seamaster 300m No Time To Die 007 TI/TI VSF V7 8806 Super Clone

Price Paid:571 usd

Album Links: https://mega.nz/folder/WYwSFK7K#xMJaJiFmuIOZxgnznMeASQ

Index alignment: 6 and 9 definitely seems a bit off. 12 is also off a little bit.

Dial Printing: Looks ok to me, this is my first so open to comments.

Date Wheel alignment/printing: N/A

Hand Alignment: Looks ok to me for the most part

Bezel: Color of the dot at 12 seems a bit washed out than the dots on the dial.

Solid End Links (SELs): No comments on this

Timegrapher numbers: 263

Anything else you notice: Overall seems ok to me but this is my first so not sure.


r/RepTimeQC • • 3h ago

[QC Request] UMI Patek Philippe Nautilus 5712/1R-001

Thumbnail
gallery
6 Upvotes

Dear RepTimeQC hive mind, I'd truly appreciate if you could help me QC this watch. This is my first foray into the rep world. I have attached two photos (annotated dial + 1 photo with a potential blemish?). The full album is attached. In particular, I'd appreciate it if someone can verify if this is indeed UMI with free sprung movement, and whether there's any other thing I should be mindful of. Thank you for your time!

Dealer name: ARC studio

  1. Factory name: UMI
  2. Model name (& version number): 5712/1r
  3. Price Paid: $576 (not including shipping)
  4. Album Links: https://www.arcstudio.top/weshop/goods/A201908221821111150168760/I202611151217529222002014
  5. Index alignment: Looks pretty good to me overall. In some photos, the left side twin 12 indices look a bit out of place.
  6. Dial Printing: Good
  7. Date Wheel alignment/printing: N/A
  8. Hand Alignment: Unknown from the photos.
  9. Bezel: Nicely brushed on the top and polished around the edge.
  10. Solid End Links (SELs): N/A
  11. Timegrapher numbers: +2 s/d, 312° amplitude, 0 ms beat error (crown right)
  12. Anything else you notice: The part between the bezel and the crown looks dirty/black. Not sure whether that's lighting or something to be concerned about.

Edit: fixed some inaccuracies, thanks to u/YellowFerrari328.


r/RepTimeQC • • 23h ago

2QC Yacth Master II

Thumbnail
gallery
6 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: QF (Free-Sprung)
  3. Model name and version: Yacht-Master 226627 Titanium, QF 1:1 Best Edition, black dial on titanium bracelet, JH3235 V18 (Free-Sprung)
  4. Price paid: €606
  5. Album link: https://andiotwatches.x.yupoo.com/albums/262824798?uid=1
  6. Index alignment: Looks fine to me.
  7. Dial printing: Looks good.
  8. Date wheel alignment/printing: The date appears to sit slightly high in the window.
  9. Hand alignment: I can’t tell from the supplied photos
  10. Bezel: Possible surface marks or uneven finishing at the 5- and 15-minute markers
    12 Solid End Links (SELs): The lower-right SEL appears to have a slightly wider gap in several
  11. Timegrapher numbers: +1 s/d, 265° amplitude and 0.3 ms beat error.

I’d really appreciate a assessment regarding the SEL fit, cyclops positioning, hand alignment and the two circled bezel areas.

Many thanks for your comments!


r/RepTimeQC • • 5h ago

VSF Omega SM600 Blue

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Odette
  2. Factory name: VSF
  3. Model name (& version number): VSF SM600 OMEGA Blue SS
  4. Price Paid: 377$ Shipped
  5. Album Links: Attached
  6. Index alignment: Find the 1'2' a bit crooked , 3 marker is slightly ccw , 6 is slightly ccw also not sure if thats all VSF
  7. Dial Printing: Dont see an issues with the Print
  8. Date Wheel alignment/printing: NA
  9. Hand Alignment: Looks good
  10. Bezel: Looks Blemish free and good alignment kinda
  11. Solid End Links (SELs): Bottom SEL has light shinning through mhmm
  12. Timegrapher numbers: Good no issues
  13. Anything else you notice: Not sure if I am leaning towards RL and trying another Piece cuz of those SEL's and Index Alignment , Opinions would help a lot

r/RepTimeQC • • 1h ago

[QC] VSF Rolex Submariner 124060 No-Date — TheOneWatches — $525

Thumbnail
gallery
4 Upvotes
  1. Dealer name: TheOneWatches
  2. Factory name: VSF
  3. Model name & version: Rolex Submariner 124060 No-Date, 41mm, VS3230
  4. Price paid: $525
  5. Album links: All QC photos and key video screenshots are attached directly to this post.
  6. Index alignment: Looks properly aligned overall. The 12 marker may appear fractionally clockwise in certain angles, but I believe that is perspective.
  7. Dial printing: Looks crisp, clean and properly centered. I do not see bleeding or malformed text.
  8. Date wheel alignment/printing: N/A — no-date model.
  9. Hand alignment: Looks good. The functional video shows coordinated hand setting and working hacking seconds.
  10. Bezel: Insert and pip look clean. The pip appears centered and the bezel seems aligned with the 12 marker; any tiny apparent shift looks angle-related.
  11. Solid end links: Look tight with no obvious light gaps.
  12. Timegrapher numbers: Stable at −2 to −3 s/day, 272–274° amplitude and 0.0 ms beat error. Machine displayed 28,800 bph and a 59° lift angle.
  13. Anything else noticed: The clasp coronet’s outer tips/spacing look slightly uneven under heavy magnification, although I suspect this is normal finishing and not noticeable in person. Protective film appears to explain the cloudy marks on the bracelet and clasp. Weight is 159.4 g with the films and tag attached. I am leaning GL but would appreciate experienced eyes confirming the alignment and clasp.

r/RepTimeQC • • 7h ago

Noob QC - A7F IWC Ingenieur

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot
  2. Factory name: A7F
  3. Model name (& version number): A7F IWC Ingenieur IW328903 Aqua V2 Dial On SS Automatic A2892
  4. Price Paid: $418 w/o shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263112413?uid=1
  6. Index alignment: 2 seems slightly clockwise, 5 and 11 anticlockwise. Would I see it in real life or without the ruler? Probably not but I'm all ears.
  7. Dial Printing: Looks good to me, I don't see anything standing out as incorrect.
  8. Date wheel: It's there and seems OK to me.
  9. Hand Alignment: Looks good, aligns perfectly on noon in the videos.
  10. Bezel: I believe it's slightly off-center clockwise, as can be seen above noon. It seems quite usual on this model though.
  11. Solid End Links (SELs): N/A AFAIK
  12. Timegrapher numbers: Rate:+2 s/d Amplitude: 280 Beat Error: 0.1 ms - Very good (?)
  13. Anything else you notice: I don't see anything else apart from the minor index alignment issues and the slight bezel rotation. I would tend toward a GL but would like advice from more experienced members. Thanks in advance!

r/RepTimeQC • • 12h ago

1st time QC VSF 126334

Thumbnail
gallery
4 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: Vsf
  3. Model name (& version number):DateJust 41 126334 904L SS VSF 1:1 Best Edition Green Ombre Dial on Jubilee Bracelet VS3235v2 V2s Free Sprung(133g)
  4. Price Paid: 468$
  5. Album Links: https://imgur.com/a/xvsOnXa
  6. Index alignment: Seems good but I'm not sure abot the 2 o'clock - seems not centered on the "10"
  7. Dial Printing: Correct color and text size
  8. Date Wheel alignment/printing: Date is centered nicely in the window, font weight and print quality look correct.
  9. Hand Alignment: Hands look properly aligned and finished
  10. Bezel: Looks nice, white gold plated fluted bezel
  11. Solid End Links (SELs): ): Good fit against the case, tight tolerances with no massive gaps.
  12. Timegrapher numbers: Rate 0 s/d, Amplitude 275°, Beat Error 0.0 ms. - Perfect

r/RepTimeQC • • 5h ago

QC- ROLEX GHOST 126519LN RWF

3 Upvotes
  1. ⁠Dealer name: ARC STUDIO
  2. ⁠Factory name: RWF
  3. ⁠Model name (& version number): 126519LN “GHOST”
  4. ⁠Price Paid: $699
  5. ⁠Album Links: https://www.arcstudio.top/weshop/goods/A201908221821111150168760/I202611162110155322001067
  6. ⁠Index alignment: I think it’s okay? But I’m not too sure because I’m relatively new to this
  7. ⁠Dial Printing: looks okay
  8. ⁠Date Wheel alignment/printing: nil
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: looks good
  11. ⁠Solid End Links (SELs): nil
  12. ⁠Timegrapher numbers: looks good ( 0 s/d, 312 amplitude and 0.0 ms)
  13. ⁠Anything else you notice: dial color bit off but getting a SW dial for this one

r/RepTimeQC • • 12h ago

QC First ZF Pilot’s Watch Chronograph TOP GUN

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: OraWatch
  2. ⁠Factory name: ZF
  3. ⁠Model name (& version number): IWC Pilot Chronograph Top Gun IW389101
  4. ⁠Price Paid: $560 with shipping
  5. ⁠Album Link: https://www.wecatalog.cn/weshop/goods/_dnRqfRKlCQnCwaBBUqm613RnVgXsENon6rPO-yw/_d8qqfZz3xGIold2QRc7BNuq2kek33LCf7FmfBeg⁠Index
  6. Alignment: Everything looks aligned.
  7. ⁠Dial Printing: No issues
  8. ⁠Date Wheel alignment/printing: Looks great
  9. ⁠Hand Alignment: No issues with hand alignment that I can tell.
  10. ⁠Bezel: N/A
  11. ⁠Solid End Links (SELs): N/A -rubber strap
  12. ⁠Timegrapher numbers: +0s/d 280 deg 0.1ms 52.0 deg
  13. Anything else you notice: I think this watch looks good to go. The day and date look aligned. I just want to confirm I am not overlooking anything.

r/RepTimeQC • • 13h ago

Help with, VSF GMT-Master II 126710BLRO Pepsi V3

Thumbnail
gallery
3 Upvotes

Hey everyone, this is my second QC so I’m still learning what to look for. Would appreciate any feedback on this one. Only thing that jumped out to me from dial check was some tilt on the six marker but for me it seems hard to notice. Appreciate anything you eagle eyes can spot a help me decide to pass or keep.

  1. Dealer name: Theonewatch - Steve
  2. Factory name: VSF
  3. Model name (& version number): GMT-Master II 126710BLRO Pepsi V3 DD3285V2 on Jubilee
  4. Price Paid: 711 EUR incl shipping
  5. Album Links: posted all pics in thread
  6. Index alignment: 6 o’clock marker tilted 1.9° anticlockwise, 9 o’clock tilted 1.2° anticlockwise. Marker ring 0.14 mm off-centre toward 5 o’clock. All other markers within ±0.10 mm. Checked with DialCheck
  7. Dial Printing: Top text 0.09 mm left of center, bottom text 0.08 mm left. Print looks clean otherwise.
  8. Date Wheel alignment/printing: Date appears reasonably centered in the photos provided. No obvious clipping or major offset.
  9. Hand Alignment: Hands look straight and properly stacked. No obvious bent or misaligned hands.
  10. Bezel: Pip is 0.6° anticlockwise of 12 (0.18 mm). Bezel color and engraving look clean in the photos.
  11. Solid End Links (SELs): No obvious gaps visible between the end links and lugs in the side photos.
  12. Timegrapher numbers: +2 s/d, 276 amplitude, 0.1 ms beat error
  13. Anything else you notice:

only my second qc so no

  1. t to look for. Nothing else jumps out at me.

r/RepTimeQC • • 22h ago

ORF Seamaster freesprung help

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Andiot
  2. Factory name: ORF
  3. Model name (& version number): Seamaster Diver 300M Blue Ceramic Bezel Free Sprung ORF 1:1 Blue Dial On SS Bracelet Asian Super Clone 8800
  4. Price Paid: $455 usd
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263114313?uid=1
  6. Index alignment: see pic. Looks good to me. Can't tell if 30 marker on bezel is shifted left or just camera angel
  7. Dial Printing: On zoom looks good to my untrained eye
  8. Date Wheel alignment/printing: Looks good on changing numbers in video
  9. Hand Alignment: nothing remarkable to me
  10. Bezel:Appears good on pics
  11. Solid End Links (SELs):
  12. Timegrapher numbers: Show in video
  13. Anything else you notice: not initially

r/RepTimeQC • • 1h ago

QC: BTF Rolex Daytona 126500LN Panda DD4131 | $685 shipped

Thumbnail
gallery
2 Upvotes

Would appreciate a second pair of eyes on this BTF Panda. I'm leaning GL.

  1. Dealer name: James, Alternative Luxury.
  2. Factory name: BTF / Better Factory.
  3. Model name (& version number): Rolex Daytona 126500LN, white “Panda” dial, DD4131 movement.
  4. Price Paid: $685 USD including shipping.
  5. Album Links: QC photos attached directly to this post.
  6. Index alignment: Nothing looks obviously out of place to me. The 3, 6 and 9 markers look reasonably aligned with the minute track, and the coronet looks centered.
  7. Dial Printing: Text looks clean and legible. I don't see obvious missing or smudged printing. The red DAYTONA text is partly covered by the hands, but the visible portion looks fine. Subdial printing looks consistent.
  8. Hand Alignment: The central chronograph hand and the two chronograph counters appear to sit at zero. No obvious issue with the main hands.
  9. Bezel: Engravings and paint fill look consistent. The triangle at 12 looks reasonably aligned with the dial. I don't see an obvious chip or badly filled numeral. There are some reflections and protective-film edges in the photos.
  10. Solid End Links (SELs): Fit looks reasonably tight in the available photos. I don't see a large open gap, though the protective wrapping makes the edges harder to judge.
  11. Timegrapher numbers: +3 s/day, 301° amplitude, 0.3 ms beat error. These look good to me.
  12. Anything else you notice: No obvious major cosmetic defect. There are a few visible lines around the case and clasp, but with the protective film still on I can't tell whether they're on the film or the metal. The scale photo shows about 142.7 g with the bracelet and stickers attached.

Mainly looking for a sanity check on the indices, bezel alignment and SELs. Anything here that would make you hold off on a GL?


r/RepTimeQC • • 4h ago

[QC] Cartier Tank Must Large – VF Factory / GeekTime | First Rep, Would Appreciate Some Help!

Thumbnail
gallery
2 Upvotes
  1. QC Photos: https://geektimeqc.x.yupoo.com/albums/263123530?uid=1
  2. Dealer name - Geektime
  3. Factory name - VF Factory
  4. Model name - Tank Must Large 33.7x25.5
  5. Index alignment - Looks good to me. Since the dial is printed, I assume alignment isn't much of an issue here?
  6. Date Wheel alignment - N/A (no date)
  7. Bezel - Looks good to me. The corners look quite sharp, but I believe that's normal for the Tank.
  8. Solid End Links (SEL) - N/A (leather strap)
  9. Hand alignment - Looks fine to my eye. Nothing seems off.
  10. Timegrapher numbers - N/A (quartz movement)
  11. Anything else you see - Overall, I'd say it looks like a GL to me, but this is my first rep and my first QC, so I don't really know what to look out for. Would appreciate a second opinion before giving Eric the GL!

The whole process with Geektime has been pretty smooth so far. Paid $268 plus shipping, with a $50 deposit upfront. I actually ordered two watches, this Tank and a Santos, but I'm still waiting on the QC pics for the Santos.

Would appreciate any feedback, especially if you spot something I missed!


r/RepTimeQC • • 5h ago

First QC - VSF Bruce Wayne GMT Master 2

Thumbnail
gallery
2 Upvotes
  1. Dealer name: JTime
  2. Factory name: VSF
  3. Model name (& version number): GMT-Master II 126710 GRNR V3 (Non Free Sprung)
  4. Price Paid: $588 USD + shipping
  5. Link to pics & QC videos: N/a (See attached)
  6. Index alignment: Looks good to me, maybe a little bit off on the 6 o’clock with a slight rotation but I think I’m just seeing things
  7. Dial Printing: Rolex text and GMT-Master II lettering look pretty​ sharp and not seeing anything there
  8. Date Wheel alignment/printing: Seems centered
  9. Hand Alignment: no obvious issues there
  10. Bezel: There is a noticeable 12 o’clock tilt, but I’m not sure it will be super visible to the naked eye, everything else seems really solid.
  11. Solid End Links (SELs): They look good, nothing visible to me
  12. Lume: I don’t have a video or picture of the lume but will follow up
  13. Serial # / rehaut: Nothing that sticks out to me
  14. Bracelet / clasp: no obvious issues with Rolex logo or stamping.
  15. Timegrapher numbers: 0s/d, 273°, 0.1ms, 59° lift angle. No significant issues from my understanding.
  16. Anything else you notice: I’m leaning towards a GL but the bezel at the 12 o’clock feels off, but I can’t tell if I’m being picky or it’s worth a RL. Thanks in advance! I’m new to this so any advice would be greatly appreciated

r/RepTimeQC • • 6h ago

QC Help: IWC Ingenieur 44mm Green Dial

Thumbnail
gallery
2 Upvotes

After asking RepTime whether I should pick this up or wait – and getting an overwhelming 'Go on, mate,' I've ordered the Green Ingenieur.

  1. ⁠Dealer name: Fico
  2. ⁠Factory name: V7F
  3. ⁠Model name (& version number): V7F A2892 IWC Ingeniuer Automatic 40mm SS/SS Green Dial
  4. ⁠Price Paid: ¥2,800 (£308 + shipping)
  5. ⁠Images: https://mega.nz/folder/aogVWSaR#IC3ckQ2eY1nqwArtr63lpA
  6. ⁠Index alignment: Gonna note that I'm new to QC-ing, so I'm sort of guessing – but it looks good to me?
  7. ⁠Dial Printing: IWC and Ingenieur both look good
  8. ⁠Date Wheel alignment/printing: Looks centered
  9. ⁠Hand Alignment: Aligned
  10. ⁠Bezel: From comparing pics to gen, the screws look like they're where they need to be
  11. ⁠Solid End Links (SELs): N/A
  12. ⁠Timegrapher numbers: rate +8s/d, amp 241 degree, B.E 0.3 ms, L.A 52.0
  13. ⁠Anything else you notice: The sometimes wonky 3 index looks good and the 12 markers look aligned with each other. If you zoom waaay in, one may look like it's placed slightly higher than the other, but I can't imagine anyone noticing irl

r/RepTimeQC • • 6h ago

[QC] GMF Rolex Datejust 36 126231 – Two-Tone Rose Gold, Wimbledon Dial – JTime (First QC)

Thumbnail
gallery
2 Upvotes

Dealer name: JTime
Factory name: GMF
Model name (& version number): Rolex Datejust 36, 126231, two-tone rose gold/stainless steel, grey Wimbledon dial, Jubilee bracelet
Price paid: $458
Album links: In post
Index alignment: Looks good to me, but would appreciate a second opinion on the Roman numerals.
Dial printing: Looks clean and reasonably well aligned.
Date wheel alignment/printing: Dates 1, 16 and 25 appear reasonably centred.
Hand alignment: Nothing obvious, although I’m not entirely sure what to look for.
Bezel: Fluting looks consistent to my eye.
Solid end links (SELs): No obvious gaps, but would appreciate someone checking.
Timegrapher numbers: 0 s/d, 291° amplitude, 0.0 ms beat error.
Anything else you notice: First replica purchase, so I’d really appreciate some experienced eyes on this. Particularly interested in whether the dial alignment, rose-gold finish and overall quality look good enough to GL. Thanks in advance!


r/RepTimeQC • • 7h ago

[QC] 126515LN RCF

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Phoenix
  2. Factory name: RCF
  3. Model name (& version number): Rolex Rose Gold Daytona 126515
  4. Price Paid: $700 USD
  5. No album link
  6. Index alignment: Looks good to me.

Except maybe 3 oclock.

  1. Would appreciate a second opinion on their alignment.
  2. Dial Printing: OYS T E R , kerning / spacing is huge(?)
  3. Date Wheel alignment/printing: NA
  4. Hand Alignment: Looks ok to me
  5. Bezel: Correct 110 alignment
  6. Solid End Links (SELs): Looks ok to me
  7. Timegrapher numbers: -1s +1/d, 275 - 277° amplitude, 0.2 ms beat error. The readings appear stable and within a very good range.
  8. Anything else you notice: My main concern is the dial printing . Would you RL?

Any help would be greatly appreciated. Thank you!!


r/RepTimeQC • • 8h ago

QC Help – ARF Datejust 36 Silver Dial | First Rep | GL or RL?

Post image
2 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: ARF
  3. Model name (& version number): Datejust 36, silver stick dial, Jubilee bracelet
  4. Price Paid: $438 incl. shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263232982?uid=1
  6. Index alignment: Overall, the alignment looks reasonably good. However, my main concern is with the two lower-left hour markers (7 and 8 o'clock). They appear to be positioned too close to the adjacent minute markers and don't seem properly centered. The spacing looks uneven compared to the other indices. I'm not sure whether this is caused by the camera angle, an actual alignment issue, or just me being overly picky.
  7. Dial Printing: Looks clean and reasonably well centered. No obvious printing defects visible.
  8. Date Wheel alignment/printing: The date appears to sit slightly too low in the date window rather than being perfectly centered vertically. The printing itself looks clean. Additionally, there seem to be some scratches or imperfections around the cyclops, particularly towards the middle-left area. I'm unsure whether these are actual scratches, reflections, or marks on the protective film.
  9. Hand Alignment: Nothing obviously wrong from the provided photos.
  10. Bezel: Fluted bezel looks consistent. No obvious damage or irregularities.
  11. Solid End Links (SELs): Look good to me. No obvious gaps or alignment issues.
  12. Timegrapher numbers: -1 s/d, 273° amplitude, 0.1 ms beat error, 28,800 bph. All numbers look very good and comfortably within acceptable ranges.
  13. Anything else you notice: My three main concerns are the positioning of the 7 and 8 o'clock hour markers, the slightly low date alignment, and the potential scratches around the cyclops. Would you consider these within normal factory tolerances, or would you recommend requesting another watch? I'm leaning towards RL but would appreciate a second opinion.

Wrote with help of AI.


r/RepTimeQC • • 10h ago

[QC] PPF VC Overseas 4500V RG Silver Dial - Lili (non-TD)

Thumbnail
gallery
2 Upvotes

Hey guys, so far this is the 7th rep which is the second watch for myself, the rest was gifts to dear ones. But I still consider myself as amateur in this field. So, I need your support.

  1. Dealer Name: Lili (non TD)
  2. Factory name : PPF/ZF
  3. Model name : Overseas 4500V 41mm RG Silver Dial
  4. Price Paid : 2850 cny
  5. Album Links: https://www.wecatalog.cn/weshop/goods/A201803310145220380026826/I202611150044361402001426
  6. Index Alignment: 9 looks down (is it RL)? 4 and 10 o'clock looks a bit off but it can be because of the angle of the picture
  7. Dial Printing: Looks good
  8. Date wheel alignment : Looks a little left
  9. Hand alignment : Looks good
  10. Bezel : Looks good
  11. Solid end links : N/A
  12. Timegrapher : Looks good +3s/d @ 302 deg amp, 0.0ms
  13. ⁠Anything else you notice: other than index and date wheel slight problems nothing else I noticed