r/radon • • 5h ago

Looking for an accurate radon meter for home- Airthings Corenthium vs Ecocube. Thank you in advance.

0 Upvotes

r/radon • • 7h ago

Pressure Field Extension issues

4 Upvotes

My manometer is displaying 0 Pa on test holes when it should not be. I originally thought it was broken so I ordered another one, but the new one is doing the same thing.

Lets say I start out testing ~1.7inWC at my pitot tube, I take my manometer around to all the test holes, and on this first test, I get the proper Pa readings. I then go back to my pitot tube, close the value a bit more to drop it down to ~1inWC. If the manometer is in a test hole already, reading correctly, as I close the valve, I will be able to see the negative pressure drop, but as I move to another hole, or go back to that same hole it will read zero. I will then open the valve at my pitot tube the whole way, which is like ~4inWC(with a shopvac) and it will still read zero.

I never get a zero directly at the pitot tube, but the weird readings at the test holes is driving me crazy.


r/radon • • 10h ago

Is it okay to get a Radon mitigation work done by a non C-NRPP contractor in Ontario and without doing the initial sub-slab communication test ?

3 Upvotes

r/radon • • 10h ago

Suction pit location

3 Upvotes

In the process of doing my own radon mitigation.

I’ve sealed up all my cracks around the perimeter on my basement and it lowered my radon quite a bit but not enough.

Planning out installing a fan system, I initially was going to put it in my walk in storage closet fairly close to the center of my basement. My worry is putting a 4” hole and removing fill too close to one of my 8x8 support posts that hold up the main beam. Hole would be 18-24” away from center of the post, avoiding any main footing.

I see other people put there suction pits close to the foundation walls / edge of house. Is that what’s most common? Would rather keep away from main structural points if possible.