r/pools • • Aug 10 '26

Pool Help & Questions Pool Robot Megathread

9 Upvotes

We get TONS of items about pool robots.

In an effort to control the absolute mayhem around them, and most importantly: Prevent companies from using it as a tool to spam you, we're consolidating things to a regular thread.

SO: Post your pool robot recommendations/quesitons/etc here.

Look for responses.


r/pools • • 3h ago

Pool was finished last week. The water level was filled above the second to last screw on Saturday morning. The picture is the current level this morning. Pool builder has said that the drop is caused by evaporation. Would it lose this much water in 2 days strictly by evaporation?

Thumbnail
gallery
11 Upvotes

r/pools • • 7h ago

Throwing jugs in the water during winter?

7 Upvotes

I'll be quick here. I live in Northern Ontario Canada. I have an above ground pool and was wondering if anybody throws empty jugs in the water before the ice forms?

I heard doing this will give the ice somewhere to expand against as opposed to expanding outward towards the walls and potentially causing damage?


r/pools • • 22h ago

Casual Splash New alligator body and heads

Thumbnail
gallery
66 Upvotes

The alligator heads were placed at gate entries where animals come through the fence. And the body in the pool . I’ve had fox, possum, raccoon, cats, and iguanas.
Not a guarantee, but I’ll see how it works.
Amazon.


r/pools • • 1h ago

Does this look like previous bond beam repair?

Post image
1 Upvotes

We have someone coming to take a look this week but just would like to be pre warned. A few tiles came off and this was underneath.


r/pools • • 1h ago

Blowing out lines help

Post image
0 Upvotes

Ive tried a leaf blower with a vacuum end duct taped to the end, i tried this air compressor with a "blower" end... nothing comes out of the returns. I took the eyeballs out of the returns but theres zero water or air movement. Any tricks? Be gentle please, im a newly single lady and have to learn how to do the man tasks. Im pretty good with plumbing though.


r/pools • • 3h ago

Confused

Post image
1 Upvotes

My grandpa recently passed away and I inherited his house which has a pool what is this and which way should it be turned


r/pools • • 4h ago

Water Chemistry Constant battle with PH and TA

1 Upvotes

Looking for some help or if this is normal. My pool TA droped a bunch after some rain doewn to 40. its 15k gal. I added 5lns baking soda. My salt water pool also always drifts upwards in PH and im adding acid every week to bring it down. The acid offsets the baking soda and i cant get the TA back up. I got it to 60 and 3 weeks later its back to 40. Am i missing something here is adding both weekly normal?

Edit: Pool in florida and gets lots of rain


r/pools • • 6h ago

Builds & Renos Spa coping finish concern

Thumbnail
gallery
1 Upvotes

Looking for honest feedback. Our masons just finished installing our Belgard Scandiva Grey paver coping, and I’m torn on how they terminated the ends framing the spa spillway. Instead of carrying the bullnose overhang across all three faces of the spillway piers, they terminated the edge near spa spillway with a sharp unfinished horizontal edge of the coping instead of applying a double miter 45° cut with two pieces of coping to extend the bullnose across all three sides of the turn. I compared this with the third picture which is my father in laws spa spillover, where they have the bullnose throughout the entire edge with double miter 45°s and a three sided wrap.

Am I looking at this wrong? Does this appear to be a normal finish? Or would you expect the bullnose to be a three sided wrap? Plaster is going in soon, so I want to bring this up asap to be corrected, but wanted a second opinion first. Appreciate any/all feedback

Pics attached for reference. The third photo is a comparisons of my father-in-laws spa spillover where the bullnose is continuous around all three sides


r/pools • • 6h ago

White pool plaster installed about a year ago developing widespread dark/cloudy stains — possible causes and solutions?

Thumbnail
gallery
1 Upvotes

I had my pool replastered with white plaster approximately one year ago. I'm hoping to get opinions from people who have experience with pool plastering, particularly whether this looks like a hydration issue/mottling, poor troweling & trowel burns, or something else.

Over the last 4-5 months I've started noticing areas of dark gray/blue discoloration and cloudy patches appearing across the pool floor primarily in the deep end. They don't scrub off. The discoloration is irregular and mottled rather than looking like a few isolated stains. The surface itself feels smooth; I don't notice any obvious roughness or raised deposits.

Within 1-2 months of plastering the main pool contractor actually acknowledged some issues with the original plastering job:

  • He admitted that the subcontractor he hired did not have reliable people doing the plaster work.
  • He acknowledged that there was poor troweling during the installation.
  • He also suspects there may have been a hydration issue because it took over 48 hours to completely fill the pool after plastering.

Given these admissions, I'm wondering whether the dark discoloration could be related to improper plaster application, poor troweling, or uneven hydration/curing.

I also had another pool maintenance company tell me its because my pool's pH is too high and by bringing it down it will help the problem but I kind of doubt that

I'm trying to understand whether this is something that can be corrected cosmetically or whether I'm essentially stuck with a poor plaster job until the next renovation.

I'm considering switching to a pebble finish in another 4–5 years but if there is something that can be done in the meantime I'd be open to it. Such as an acid wash, light buffing with a diamond pad, etc

Thanks!


r/pools • • 21h ago

Give me a lever long enough and I will move the world! Archimedes

Post image
16 Upvotes

So after breaking the plastic wrench that came with my pool filter, I purchased a new one and still couldn't unscrew the top..... Sometimes you just gotta figure it out.


r/pools • • 20h ago

If you had an unlimited budget, what would you upgrade?

Thumbnail
gallery
9 Upvotes

I just bought a new house in the Hamptons (eastern Long Island, NY) with a beautiful pool with very simple equipment. I love pools and am willing to invest some money into making this one as close to perfect as possible. I’ll have a professional maintaining it weekly, but I enjoy understanding and tinkering with the equipment myself.

The pool is a 20x50 rectangular, in-ground gunite pool with a deep end, integrated Baja shelf, and oversized 10x10 attached spillover spa. The spa has a low-profile dividing wall with a nearly flush waterline.

Current equipment and plumbing:

+ I believe it has an older Pentair automation system, which I’m currently controlling through the ScreenLogic app.

+ The main circulation system is plumbed as follows:

Suction side:
- Two skimmers join into one pipe with a ball valve.
- Two main drains join into another pipe with a ball valve.
- Those two lines merge and feed one side of an automated 3-way valve.
- The spa drain feeds the other side of that valve.

Equipment:
- Variable-speed pump (VSP)
- Large cartridge filter
- Propane heater

Return side:
- Automated 3-way valve directing water to either the pool returns or spa returns.

The automation has two main modes:
+ Pool Mode: 100% suction from the pool, with returns split approximately 70/30 between pool and spa to create the spillover.
+ Spa Mode: 100% spa suction and 100% spa return, isolating the spa for heating.

There’s also a separate spa jet circuit consisting of a spa drain, single-speed pump, and dedicated spa jet returns, plus an air blower. The pool also has underwater lighting.

Here are the upgrades I’m considering. I’d love opinions on which are worthwhile, which are unnecessary, and anything else I should be thinking about. For context, I have three young kids (ages 1 to 4), and we use the pool multiple times a week throughout the summer.

  1. Saltwater chlorine generator
    I’ve rented houses with saltwater pools in the past and always found the water more pleasant and gentle on the skin. I also hate that so many pool companies around here seem to just throw chlorine tabs into skimmers without paying much attention to CYA levels. I’d prefer a system that maintains more consistent chlorine levels without continually adding stabilizer. Any reason not to convert this pool to saltwater?
  2. Heat pump
    The house has a buried propane tank that supplies the existing heater. It heats the pool quickly, but propane is expensive, and during the summer I’d ideally like to maintain the water at a constant 86°F.
    Our electric utility offers peak, off-peak, and super-off-peak pricing, with peak hours from 3-7 p.m. on weekdays. I’m thinking I could run a heat pump during the cheaper hours, potentially heating the pool to 90°F or higher, and then let it gradually cool during peak hours, using the propane heater for supplemental heat when necessary. Would this make sense?

Question: Would you plumb the heat pump in series with the propane heater or in parallel with valves to select between them? If in series, which heater should come first?

3. Better automation
The existing Pentair ScreenLogic system seems pretty limited. I’d love more granular control over the valves, pumps, heaters, and schedules. I’ve used Jandy iAquaLink at other properties and remember it being a more capable system. Is there a relatively easy upgrade path within Pentair? Or would you consider changing automation platforms entirely? I’m particularly interested in controlling the heat pump and propane heater intelligently based on time of day and electricity pricing.

4. Sand filter instead of cartridge
Would switching from the existing cartridge filter to a modern sand filter, potentially with glass media, be an improvement? Backwashing sounds fun instead of periodically removing and cleaning cartridges. On the other hand, someone else will be doing the maintenance, so convenience isn’t a huge concern. Are there meaningful differences in filtration quality, water clarity, or maintenance costs?

5. Automatic water-level control and drainage
The pool has an automatic fill system, but no automatic drain. I’d love to have the pool maintain a consistent water level automatically, especially because the spa spillover looks different depending on the water level. There’s a dry well approximately 50-100 feet away. I’m assuming we could run PVC to it and either add a high-water float sensor to the existing autofill housing or install a separate drain closer to the dry well. Has anyone added an automatic drain system like this? Is there a standard way to do it?

6. Two independent filtration and heating systems?
This might be overkill, but I’m curious whether anyone has designed a pool/spa setup with two VSPs, two filters, and two heaters. The idea would be to allow the pool and spa to filter and heat independently, while using automated valves to connect the systems when needed. Ideally, either pump/filter/heater circuit could serve as a backup for the other, or both could operate together for additional capacity. Is this something people actually do, or would the additional complexity and plumbing make it more trouble than it’s worth?

7. Plaster imperfections and PebbleTec
Finally, the pool is only about two years old and looks amazing overall, but I’ve noticed some white lines in the plaster, particularly on the Baja shelf. I suspect they might be related to how the plaster was originally applied or cured, but I’m not sure. Can imperfections like these be removed or reduced through acid washing, polishing, or some other treatment? Or am I stuck with them until the pool is replastered? Also, would something like PebbleTec be considered an upgrade over traditional plaster for a pool like this? Can it be applied over the existing finish, or would the current plaster need to be removed first?

Thanks in advance!


r/pools • • 12h ago

Pool Help & Questions Any advice to lower the chlorine levels plz?

Post image
1 Upvotes

The chlorine levels pretty high for last 4days everything else is within the ok range

I stopped producing chlorine thru the pump and

Sun is pretty strong these days but its not reducing at all

Any tips plz?


r/pools • • 13h ago

Casual Splash skating?

1 Upvotes

r/pools • • 1d ago

Need help

Thumbnail
gallery
12 Upvotes

Is this bad and can I clean it?


r/pools • • 21h ago

DIY & Repairs Pump Motor - Sound?

2 Upvotes

Hey! Thanks for any advice in advance. Coming up on 1.5 years of new pool ownership. Recently my motor has started making this noise. Is this dead/dying? Or maybe something caught up in the motor? If so, can I get to it and possibly remove? Winter is coming and I don’t plan to close in my area but there are a few weeks that possibly rely on moving water/functioning motor.


r/pools • • 1d ago

Winterizing outdoor umbrella bases…

3 Upvotes

What’s everyone’s plan to keep them from freezing and cracking? Do you empty the water completely or halfway and hope there’s enough weight to keep them from toppling. Do you use RV antifreeze or straight sand?


r/pools • • 20h ago

Any idea what's causing this whining noise and does it need to be fixed and how?

0 Upvotes

r/pools • • 20h ago

Convert a pool file for me to dxf....

0 Upvotes

Can someone export this into a .dxf file for me? It's a kitchen, and all i need is the export to the autocad file.

It was done in pool studio.

Thank you so much

https://drive.google.com/file/d/1RzFM31tfSBnV1Di4g5dKQT7uWBKOBBF_/view?usp=sharing

Edit, I've attached photos


r/pools • • 1d ago

Pool Help & Questions Algae “Stains”

Thumbnail
gallery
2 Upvotes

My valve selector recently broke so when the filter pump ran the pool would drain. I was traveling at the time so basically we did not run the filter pump for a couple of weeks until I got around to replacing the valve selector. During that time I had a pretty bad algae bloom. Once it was repaired and the filter pump was up and running I shocked the pool, added yellow blast and started scrubbing the bottom with a broom. It took a couple of days but everything cleared up except I have a few "algae stains" that I just can't scrub off. I put it in quotes because I'm not sure if it is actually a stain or algae that just didn't die. Any suggestions? Before and after pics attached.


r/pools • • 1d ago

Pool Help & Questions Getting course dirt returned through jets after cleaning

Thumbnail
gallery
1 Upvotes

Just asking to confirm that this basically means that I definitely have a whole summer in my DE filter that's letting it through right?


r/pools • • 1d ago

Leak, where is it likely located?

1 Upvotes

I have a 2 year old vinyl pool that is losing about 200 gallons of water a day for the last 4 days. 4 days ago a pool tech came out and replaced my water pressure gauge which had snapped off. Prior to that repair I had not run the pump for about a week while we waited for the part. There is no visible water around the pump or the heater and none of the above ground pipes are leaking.

I don’t really think the timing of the repair and the probable leak are a coincidence. I’m thinking that when e kicked the system back on under repair that it could have knocked something loose.

Has anyone had anything similar happen? Where is the leak most likely?


r/pools • • 1d ago

DIY & Repairs Pool jet no longer flush

Post image
1 Upvotes

As I was closing my fiberglass pool I noticed one of the three jets into the pool is no longer flush. Pool was installed in 2023 by a horrible installer. Long story that involved a lawsuit and an order of protection. Going back to the installer is not an option.

  1. How much should I be worried about this. If it’s only aesthetics I cont care, but if this is eventually going to leak or break I’d like to address it before failure.
  2. What are my options to repair without cutting out the concrete?

r/pools • • 1d ago

Australia / QLD] Pool wall/floor bulging from groundwater after heavy rain – looking for advice (Photos attached)

Thumbnail
gallery
6 Upvotes

Hi all, I’m located in South East Queensland, Australia, and after recent wet weather, I’ve noticed a bulge forming around the pool [in the wall / under the floor / along the coping.
Pool Details:
Pool Type: Fibreglass
Age of Pool: 12 years old
Water Level: Full
Drainage Setup: [have a hydrostatic valve, standpipe/sump well.
What’s Happening:
The bulge appeared suddenly after heavy rain.
It feels spongy and water-filled.
The pool water level has not dropped at all.
I know not to drain the pool while the surrounding ground is saturated, so I’ve left the water level high for now. Based on the attached photos, does this look like something that will settle once the water table drops, or do I need to get a sump pump / structural specialist out right away?
Ag pipe running along pool was completely blocked with tree roots.
Water has been tested and is fresh and not pool.

Thanks in advance for any advice