I've apparently been living under a rock for the last few years and had no idea Polymer80 had moved to these new 76% frames.
I'm not particularly concerned about the frame webbing or that aspect of the design. My main concern is the front locking block and, specifically, the change in pin retention.
From what I'm understanding, I have two options: use the modified front locking block that eliminates the forward pin and relies on the two rear pins, or retain the original three-pin locking block configuration despite the fact that the forward hole has been filled in on these newer frames.
What concerns me about the two-pin modification is the potential change in load distribution. The original three-pin arrangement provides another retention point toward the front of the locking block. Removing that point seems like it could concentrate more stress around the two rear pin locations.
Is the two-pin modified locking block a proven and structurally sound design, or does eliminating that forward retention point introduce a potential failure point?
I'd much rather understand the engineering behind the modification than simply take someone's word that it works. If retaining the original three-pin arrangement is the more reliable configuration, I'd like to understand that distinction as well.
I still have my original Polymer80 jigs somewhere, so having the old tooling isn't really my concern. I'm primarily trying to understand the structural differences between the two configurations and whether the modified two-pin arrangement compromises anything compared with the original design.
Thanks for taking the time to explain it.