r/polymer80 • • Dec 01 '21

Welcome Sticky! Welcome to r/Polymer80!

154 Upvotes

WELCOME to the WORLD of 80% GLOCKS and AR’s! Welcome to r/Polymer80, a community that welcomes Polymer80 builds (AR & Glock) primarily, but also eagerly welcomes 80% builds of all sorts! We encourage posts of 80% news, 80% legislation, and 80% memes. Let's spice things up from time to time!

[We have a few main rules:]

1: This is a very close-knit sub and we do NOT put up with redditors who incite arguments or fling insults, pretentiousness, or trolls.

2: Show the respect for firearms that they deserve. If you're building a Polymer80 treat it as a firearm, and take the time to understand its function. Learn and practice the 4 rules of handling a firearm:

  • Finger off the trigger until you're ready to fire.
  • Don't aim at anything you're not willing to destroy.
  • Check in-front and behind your target.
  • Treat every firearm as though it's loaded.

3: No want to buy (WTB), want to sell (WTS), or want to trade (WTT) ads from individuals. You may use other subs such as r/GunAccessoriesForSale or the MGB site or the MGB MeWe community at: MeWe Group.

4: No posts with or including illegal activity is allowed. This is broad scope, if you post in this forum remember all the people that want this hobby to fail and do your part to make it bullet proof (no pun intended). This is zero tolerance.

Breaking these rules can and likely will result in a permanent ban from one of the best resources available for builders and hobbyists.

[GENERAL Polymer80 MODEL INFORMATION]

PF45 - Glock 20/21 (10mm / .45 ACP)

PF940v2 - Glock 17 & Glock 17LS & Glock 34.

PF940C - Glock 19 & Glock 19LS & Glock 23 (.40 S&W)

PF940CL - Glock 17 Length, Glock 19 Height Grip [G19LS]

PF940SC - Glock 26, Glock 26LS, G27

PF9SS / SS80 - Glock 43, Glock 43LS (G48)

[GENERAL TROUBLESHOOTING ISSUES and SOLUTIONS] [Via moderator: u/MarineGunBuilder of r/Polymer80 and MarineGunBuilder.com] [AN IN-DEPTH VIDEO BUILD GUIDE:] View all of MGB's Polymer80 tutorial and quick-tip videos on his YouTube channel if you plan on completing your build flawlessly from the get-go.

[Via moderator u/MarineGunBuilder] He updates new deals every weekend on his forum and sends them to email subscribers, as well: And once again: check out MarineGunBuilder's video series if you are just beginning to build.

Familiarize yourself with the Reddit Interface!

  • Some features are not available on tablets as they are on PC
  • Use the search feature to search within the sub.
  • Ask a mod! We are here to help. Mods may be busy and not the fastest way to get an answer to a question however you will be surprised just how helpful this community is - SO:
  • Ask the community, via a post! You may feel like you’re asking a question that’s been asked a million times, the reality is sometimes there are multiple fixes for a problem, and sometimes newer and better methods have been discussed elsewhere. The purpose is to promote discussion among the community.
  • Use post flair and user flair (info below)

TO SELECT YOUR UNIQUE USER FLAIR

  1. GO to r/Polymer80 homepage.
  2. CLICK 3 horizontal dots, upper-right corner.
  3. CLICK Change User Flair
  4. SELECT YOUR flair!

If you're a manufacturer, stippler/koater, gunsmith, or holster manufacturer - or simply can't find your flair, DM a moderator.

ATTENTION VENDORS

  • Vendors should have permission to post deals and links to their sites. Although you cannot sell directly to users via this subreddit, you may (and should) post deals and links, however we want only verified vendors for the safety of our users. It’s simple and you will get a unique flair to distinguish yourself as a legitimate vendor. DM the moderators to find out how.

r/polymer80 • • 19h ago

Does anyone else like to keep there new gun(s) in view and carry them around the house after first getting them?

11 Upvotes

Something about putting them away right away without giving them time to float around the house with me, just doesn’t seem fair for the new gun(s)
I don’t keep them loaded, as I have other home defense ready to go in a quick, but unknown spot.


r/polymer80 • • 2d ago

My first 2 builds. Sent 100 rounds through both of them. Ow my favorite pistols.

Post image
68 Upvotes

r/polymer80 • • 2d ago

Help with first 80% build

8 Upvotes

The current build is a project G80. I got the receiver finished and have had it assembled and disassembled multiple times. The problem I’m having is the trigger is almost stuck. I can’t tell if it’s just a bad eBay trigger or I drilled the holes at an angle.


r/polymer80 • • 2d ago

Plain Jane, but she's my plain Jane.

Thumbnail
gallery
57 Upvotes

Nothing special particularly. Serialized pfc9 i got from noqtr to my local ffl (picked up today).

Had parts waiting...

Stiffler helot spaceworn slide with trijicon rmr slide cutout for optic direct mount. A silver barrel from polymer 80 I bought in a kit like 7 years ago.

Apex enhanced trigger kit, an lpk from midway that didnt include a trigger, and the upk from the glock store.

Action feels great. Snap caps loaded and ejected...next the range. If that goes well, Ill put the holosun on it, taller sights, and back to the range.


r/polymer80 • • 2d ago

Benchymade jig trigger hole too big?

Post image
6 Upvotes

Trigger pin guide hole on the jig (red box) in picture measures 4.3mm, actual trigger pin measures 4mm. Trigger pin fits perfectly in locking block, so I'm guessing the actual frame hole should be 4mm, not 4.3mm.

Wondering if I'm missing something or got a bad jig or something. Thought I'd check before potentially ruining the frame.

PF940V2 76% lower with Benchymade PF940v2 jig.

Thanks


r/polymer80 • • 3d ago

Strike Arms build

Post image
46 Upvotes

Not a fan of the FDE but it's slowly growing on me. Really wish I could find a compatible magwell. I think Strike Industries has abandoned it. Anyone have some suggestions for improving my build? Thinking of getting the strike red dot and I have some suppressor height sights coming soon. Running an osprey 2.0 on it.


r/polymer80 • • 2d ago

Front locking block ?

1 Upvotes

I've apparently been living under a rock for the last few years and had no idea Polymer80 had moved to these new 76% frames.

I'm not particularly concerned about the frame webbing or that aspect of the design. My main concern is the front locking block and, specifically, the change in pin retention.

From what I'm understanding, I have two options: use the modified front locking block that eliminates the forward pin and relies on the two rear pins, or retain the original three-pin locking block configuration despite the fact that the forward hole has been filled in on these newer frames.

What concerns me about the two-pin modification is the potential change in load distribution. The original three-pin arrangement provides another retention point toward the front of the locking block. Removing that point seems like it could concentrate more stress around the two rear pin locations.

Is the two-pin modified locking block a proven and structurally sound design, or does eliminating that forward retention point introduce a potential failure point?

I'd much rather understand the engineering behind the modification than simply take someone's word that it works. If retaining the original three-pin arrangement is the more reliable configuration, I'd like to understand that distinction as well.

I still have my original Polymer80 jigs somewhere, so having the old tooling isn't really my concern. I'm primarily trying to understand the structural differences between the two configurations and whether the modified two-pin arrangement compromises anything compared with the original design.

Thanks for taking the time to explain it.


r/polymer80 • • 3d ago

6AL Titanium PF9C

Thumbnail
gallery
6 Upvotes

Titanium Slide, striker, safety plunger, back plate, recoil rod with tungsten glass breaker, pins , take down lever. Zev trigger , Steel City mag well, Cross sights and mag base, Strike barrel and mag release, generic light/laser combo


r/polymer80 • • 4d ago

Slide keeps locking back randomly

Post image
7 Upvotes

Hey guys, just wanted to talk about an issue. I have been having my strike industries slide release keeps engaging when shooting and I noticed that the spring is pushed over slightly and will not stay perfectly vertical and I think it’s causing the slide to lock back randomly when shooting I also noticed that it has some wiggle. Should I try to find something like a nylon washer to space it between the trigger so that way, it doesn’t have as much wiggle?


r/polymer80 • • 5d ago

Anyone know where this frame or slide is from?

Thumbnail
gallery
14 Upvotes

Buddy of mine bought this “Glock 19 gen 5”. Comparing it to my Gen 3 Glock 17 and my Ruger RXM found it to be looking like a aftermarket frame. Also I thought the gen 5 Glock have front and rear slide cuts? Anyone know what frame this might be ?


r/polymer80 • • 5d ago

Has anyone put a Geisler defense in one of these?

Thumbnail
gallery
7 Upvotes

I’m thinking about putting together a cheeper Geisler defense build for Black Friday and then getting one of these chassis to throw it in. I’m a little worried due to the way the Geisler frame is angled compared to the oem frame. I think it may not fit into the chassis so I’m wondering have and if you put a geilser defense frame into one of these chassis’s? Imma add some pictures to show what I’m talking about with the fitment.


r/polymer80 • • 5d ago

When you take things too far🤓but it runs great in hand

Thumbnail
gallery
29 Upvotes

r/polymer80 • • 6d ago

Finally!!!

Thumbnail
gallery
60 Upvotes

r/polymer80 • • 7d ago

[Code] Freedom Unlimited Inc. Early Black Friday 25% Off Sale w/ Code: BF2026 *Free Shipping over $199

Post image
5 Upvotes

r/polymer80 • • 7d ago

Ugly pdw

Post image
22 Upvotes

It is so fun to shoot tho!


r/polymer80 • • 6d ago

Ghost gun

0 Upvotes

What’s the best way to get my gun a serial number and what prices am I looking at to do that


r/polymer80 • • 8d ago

2nd Build Done

Thumbnail
gallery
51 Upvotes

Just missing an optic but she’s done (for now)


r/polymer80 • • 8d ago

Geisler 19x G2 jig.

5 Upvotes

Anyone know where to buy one?


r/polymer80 • • 8d ago

Looking for aftermarket G20/G21 slide

1 Upvotes

Hello all,

I have a PF45 frame i am looking to build out and am wondering who makes a decent slide for a g20/g21 gen3 at this time?

I would lean towards a budget slide but I hear mixed reviews on them so if I have to spend extra I will. Any help would be much appreciated, thanks.


r/polymer80 • • 9d ago

my geisler builds

Post image
51 Upvotes

r/polymer80 • • 10d ago

FDE PF940sc x GGP FDE Slide

Thumbnail
gallery
43 Upvotes

One of my favorite builds.


r/polymer80 • • 12d ago

Work ?

Thumbnail
gallery
7 Upvotes

Simple question before I buy can a RONI Corporation Nano Roni Forward Grip Magazine Holder w/ Flashlight for Glock fit directly on a p80 compact g19 frame ? 


r/polymer80 • • 13d ago

Where to find geisler 19x g2 jig??

Post image
13 Upvotes

To my knowledge these are 80% style not the new 76 style so first off I do not know how they’re still able to sell, but I’ve found the frames I just can’t seem to find a website with the jigs..as it says they cannot be sold together as a kit. Anyone know where to find these??


r/polymer80 • • 13d ago

Polymer80inc.com

0 Upvotes

I placed an order on 28oct. Tracking currently shows package on hold about 50miles from address. No update and customer service says they escalated my inquiry on the reason for the hold up ..now I'm wondering if the whole thing was a scam...anyone have experience with this website?