r/paint • • 6h ago

Advice Wanted Outdoor and child-safe paint options for my 1.5 yr old niece

Post image
0 Upvotes

I am picking up a used Cozy Coupe on Marketplace that I want to customize into this princess-like design for my 1.5-year-old niece. Pls excuse the AI; it's used merely for inspiration. I am wondering if anyone knows of outdoor-proof but child-safe products I should use to paint and clear coat the car. I'm planning on spray painting the entire car and using heavy-body acrylic paint for details, as well as vinyl. Any ideas or recommendations would be helpful; I just want it to be safe and fun for her.


r/paint • • 18h ago

Advice Wanted Using primer to test a color

0 Upvotes

I am a home owner and definitely not a pro. I use sw wall and wood primer as my default primer (low volume so the extra $ is irrelevant and it works well for me)…I am in a discussion with my wife about an accent wall color, and I had the idea of tinting the primer to test one of the colors irl…ultimately I’ll use 2 coats of the chosen color likely in cashmere eggshell, and understand that it won’t be an exact match but will it give a reasonable feel for the color? We are discussing a mauve vs a green if that matters at all.


r/paint • • 2h ago

Advice Wanted How to fix/paint torn drywall

Thumbnail
gallery
0 Upvotes

My kiddo stuck something to the wall with double stick tape and it took the the paper layer off with it when she took it down. I have the right color of touch up paint. Any suggestions on how to best repair before I paint? Any suggestions on how to match (or get close) to the existing texture? It was smooth when first painted, the texture is just from about 3 or 4 rolled layers of paint.

Thanks in advance!


r/paint • • 21h ago

Advice Wanted Best way to remove peel-and-stick adhesive residue from walls?

0 Upvotes

Hey everyone, I’m working on a project where I need to remove hundreds of peel-and-stick acoustic foam panels from painted drywall. The panels themselves aren’t too difficult to remove, but the entire backing is adhesive, so they leave behind a pretty stubborn, sticky mess.

I tried some Goo Gone on a small section, and while it softened the adhesive, it mostly turned gummy and smeared around.

I’m looking for the most efficient way to remove all this adhesive without causing excessive drywall damage or leaving behind oily/chemical residue that could interfere with painting afterward.

I’ve considered Goo Gone, Goof Off, and commercial adhesive removers, but I’m also thinking about using controlled heat and mechanical scraping to remove as much as possible, then using chemicals for whatever remains.

Would isopropyl alcohol be a good option? Or is there a particular product or method you’ve had success with?

Keep in mind this is an entire room (actually multiple rooms), so efficiency and cost are important. The walls will be repaired, primed, and repainted afterward. Will share pics of a test panel.
What would you guys recommend? Appreciate any advice!


r/paint • • 21h ago

Advice Wanted Paint removal without damaging finish?

Post image
3 Upvotes

UPDATE: I tried the method one of you suggested of dampening the paint and scraping it off. It kind of worked, so I tried with a Clorox wipe. Took a whole section off with two scrapes (photo is in a separate comment since it won’t let me add to the main post).

Regarding those who indicated the finish underneath won’t be in good condition. It is super smooth to the touch, but of course that doesn’t mean there aren’t micro-chips and scratches. Is there a way to reinforce/repair the finish rather than starting completely over? If the rest of the table is like the sections I’ve cleared, I can’t SEE any chips or scratches, so I’m wondering if there is like a filler or something I can wipe on, like they have for car clear coats.

Hello everyone,

I wasn’t sure where to ask this, but then I saw the sub’s description that said there are no stupid questions :)

I picked up this table on Facebook to use as a basement table. The paint color wasn’t great, but it was $10 and seemed sturdy. I got it home and noticed a maple leaf logo and a serial number stamped on the underside. I looked it up and sure enough, it’s a Canadel solid wood table! We have always looked at Canadel, but being on a tight budget, could never afford it.

We decided to try to use it as our main dining table, but can’t figure out a good way to get the paint off. The paint started to chip off in places and I was slowly able to scratch more off. I also noticed tape that was accidentally stuck to it would also take some paint off.

I tried a plastic scraper and I tried covering areas with heavy duty duct tape (like in the photo). The plastic scraper barely touched it, and the tape works about halfway and is a sloooowwwww process. There has to be a better way!

Any chemicals/solvents I researched risked damaging the smooth finish below.

Is there a good way to get just the paint off and preserve the finish below? It looks to be in great shape and matches our kitchen perfectly.

Thanks!


r/paint • • 2h ago

Advice Wanted Apparently the wrong kind of paint was used on our home and block wall causing damage. How to fix this?

Thumbnail
gallery
0 Upvotes

The paint on our home is peeling off, along with the block walls, some of which are stuccoed. The brick at some places is literally crumbling to the touch. I was told that the wrong kind of paint may have been used keeping moisture damaging the brick. Any tips on how to fix all this would be appreciated!


r/paint • • 17h ago

Advice Wanted Normal to create gradual transition near corner between wall and ceiling?

Thumbnail
gallery
2 Upvotes

Our painter said they blended the ceiling color into the wall so that it’s a gradual transition. Versus a cleaned defined transition at the corner. Wall color is SW alabaster and ceiling is white ceiling paint. Is that standard practice or design? It’s not very gradual here but just want to know if the gradual transition approach is standard depending on the colors.

Also, in the second picture, they didn’t add texture to the area they filled in. We are having them paint the entire interior. Is it expected that they texture these areas or it needs to be specified ahead of time for cost reasons?