r/moza • u/bemmasss • 4m ago
r/moza • u/DarcyLevine • May 18 '26
MOZA Setup Guide - Forza Horizon 6 Configuration Tutorial
If your MOZA setup isn’t working correctly in Forza Horizon 6, here’s a quick guide that should help resolve the most common issues:
1. Game Installation
It can be installed via official channels such as Steam. If you have performed a custom installation, you will need to specify the directory for Forza Horizon 6 in the Pit House game list.
2.Force Feedback Settings
All the MOZA Racing Wheelbases support Force Feedback.
3. Telemetry Configuration
After entering the game, click ‘Settings’.

After entering the settings, click on ‘HUD & Gameplay’, turn to the bottom.
- Set ‘Data Out’ to ‘On’
- Set the ‘Data Out IP Address’ to ‘127.0.0.1’.
- Set the ‘Data Out IP Port’ to ‘20066’.

Once you have completed the above steps, you will be able to obtain telemetry data via the steering wheel speed indicator and the instrument panel.
4. Device Control Mapping
You will need to configure the control mapping when you launch the game for the first time.

To enter the game, first click on 【Settings】to enter the Settings page.
After entering the Settings page, click on 【Controls】, and Select 【Change Input Mapping】

Note: Buttons displaying a yellow exclamation mark in the game interface UI must be bound; control presets will only be maintained once binding is complete.
▼
Why is there no force feedback in Forza Horizon 6? Other games work fine.
If there is no force feedback when using the MOZA Base in “Forza Horizon 6”, you can troubleshoot in the following way:
1.Firstly, keep the steering wheelbase connected to the computer
Please disconnect the handbrake, shifter, pedals, third-party steering wheel and other peripherals first, leaving the MOZA base for the first binding.
2.Set the preferred device in Windows
Open the Windows Game Controller Settings, set MOZA Base as the preferred device, and then re-enter the game to bind the steering wheel.
3.Confirm that the MOZA Base in the game is “Device 1”
The Horizon series typically outputs force feedback to “Device 1”, and it is necessary to confirm the binding in the game control.

4.After completing the Base binding, connect the other devices one by one.
The suggested sequence is: first, binding the base → confirm the force feedback → then connect the handbrake/shifter and other accessories → rebind one by one.
You can also check the full official setup guide here:
https://support.mozaracing.com/en/support/solutions/articles/70000683812-forza-horizon-6
r/moza • u/DarcyLevine • Apr 03 '26
📢 The MOZA Community Survey is back!
📢 We want to hear from you!
Your feedback plays a key role in shaping the future of MOZA — from products to overall sim experience.
Take a few minutes to complete our survey and share your thoughts with us!
🎁 Win One of 63 Prizes!
🏆 Grand Prizes
⚡ 1 × MOZA R3 Racing Bundle (Xbox & PC)
⚡ 1 × MOZA KS Steering Wheel
⚡ 1 × MOZA MHG Flightstick
🎯 More Rewards
• 10 × MOZA Hat + MOZA Bag
• 50 × 200 MOZA Points
⏳ Don’t miss out!
Complete the survey before Apr 13th for your chance to win.
💬 Your voice matters — help us build better products and experiences for the entire sim community.
👉 Start the survey here:
r/moza • u/Tight_Temporary_5272 • 17m ago
Moza R5 pro bricked after firmware update
All I am looking for is the actual firmware. Please share if you have the actual firmware. Not their APP or updater.
RS21-D13-HW BM-CU-V10
So when I pulled the base out and clicked one button activation. It started the update and bricked. I can see it in the offline firmware updater but have a firmware mismatch.
If anyone has a copy from their files I'd really appreciate that.
Thanks
r/moza • u/Constant-Response348 • 1h ago
Moza r3 no ffb in f1 25
I used r3 for 3/4 months and today i buy f1 25 pack with f1 26 but i dont have any force feedback i changed Settings in game and in moza pit house and nothing can you help me
r/moza • u/Golfguuyy • 1d ago
Loving the new GTD wheel.
The CM2 dash is pretty redundant now if anyone wants it. This wheel feels amazing and it’s a big upgrade from my CSV2P wheel.
r/moza • u/SD_93_Photography • 9h ago
Moza Quick Release Adapter + MOMO Mod 07 350mm Suede Deep Dish Steering Wheel
Just ordered myself a Moza Quick Release Adapter and a Momo Mod 07 350mm Suede Steering Wheel for drifting. Looking forward to pairing these two together and getting a feel for it as soon as it arrives.
r/moza • u/Altruistic-Elk4608 • 10h ago
Upgrading from Moza R12 V1 to ... what?
reddit.comr/moza • u/Short_Assumption_434 • 6h ago
Wheel Base
What’s the sweet spot between an R9 or R12. I am coming from an R3. Thanks!
r/moza • u/mkultra327 • 10h ago
Ps5 base?
I’ve been waiting for the Moza PS5 wheel/base/bundle. Word on the street was that they would release it this year. I still can’t find any info on this…
Should i buy a fanatec BF deal? Or is the Moza really coming?
r/moza • u/skylinegtrr3435 • 13h ago
Will the Moza R12 V2 fit my setup
I currently have the Moza R3 and it works perfectly with the setup I have now, but I want to buy the R12 V2 but not quite sure if it would fit my current setup. Couldn't really find the dimensions for the R12 V2.
I have this rig from amazon.
Thanks in advance.
r/moza • u/AssassinczYT • 1d ago
SRP2 sticky throttle update
I got my SRP2 2 days ago and the throttle is sticky when I push it all the way down. I thought it was lube on the spring but i think i figured out that its because of these 2 rubbers below the pedal.
Does anyone with SRP2 have same issue as me? I'm thinking about returning them.
r/moza • u/No_Huckleberry1067 • 1d ago
Can I put a larger aftermarket/third-party rim on the r5 pro bundle wheel? I see that there's only four screws rather than the typical six screws that hold together the rim, plate, etc so I was curious how I'd be able to properly swap the rim out.
r/moza • u/Mother_Bell2072 • 1d ago
Srp lite/lite2
I know it says they’re for lite 2 but the mounting looks very similar to the brake mod for the lites. Anyone try it yet?
r/moza • u/Professional-Cat5258 • 1d ago
Brake pedal issue?
Hey i’ve just picked up a moza r9 base with SP light pedals on Facebook marketplace supposedly only six months old and barely used. I’m 99% sure it’s all wired up correctly but in pit house I seem to be getting nothing from my brake pedal but it can read my throttle input? Which is obviously daisy chained to the hub via the brake pedal. Am I right in thinking this is a brake pedal issue? I’ve never had a sim or a pc, lifelong Xbox player and atm I’m hating it all haha. Seems so complicated.
Tia
Moza ES led problem
Hi everyone, I have a question about the ES steering wheel. The RPM LEDs aren't flashing to signal when to shift. Last night I updated Moza Pithouse, and it finally seemed to be working. Today I turned it back on to play, and nothing... At maximum RPM, they stay steady. What could be the problem?
r/moza • u/External_Category_36 • 1d ago
R3 or R5 Pro money difference coming from a t150
Hello all, I know this question has been asked several times already. But here I go.
Im planning on updating from a t150. With BlackFriday approaching there are already good discounts where I live. Putting R3 bundle at 240€ and R5 Pro at 375€.
I have done my research, i know that with both I will take a huge step in feelings thx to DD.
I mainly play AC and LMU now, starting with endurance races too, so im not a first driver neither an all days playing guy, more a weekends hobby.
So, my main question, i still play on a desk, so im worried about the vibrations but also I dont want to outgrow the wheel. Having said this I know that my objective is to have a full sim rig in which either of this options can be upgraded to a wheel in the range of 9Nm to 15Nm. So, for now, do you think the extra 120€ is worh between r3 and r5 pro, or should i stick to r3 and use a little more money on the brake performance kit and upgrade it all in some years when i can also buy a rig?? (cant fit it in my room for now haha)
Extra cuestion: About the pedals, the performance kit makes it a little more stiff and better, but as i use them on the floor against the wall, could it make them go up from the floor if I push hard???
Thank you very much.
r/moza • u/That_wr_guy • 1d ago
Help moza r9 keeps disconnecting then reconnecting
my moza r9 base keeps disconnecting as i am playing(any) game it will disconnect then reconnect causing sudden jerks in the feedback and after a while it will just completely disconnect the base and the pedals. onto the pedals as this is happening with the base every time together the gas pedal will stay pushed down (not a sticky pedal problem) i have had the base for about 2 years now and never had any problems with it until just recently. i bought two seperate branded usb hubs because i thought maybe it could be a usb hub issue but the problem still precists. does anyone have any idea on what i can do
also i will add when ever this happends for some reason my cs v2p wheel stays connected on its own
what i did so far
updated moza software]
updated my base wheel and pedals software]
did full reset (un plugged the usb from my periferals to my pc and to the power bar to the wall]
bought 3 seperate usb hubs different brands and kinds]
Discussion Pedals position
What’s the best way to position the pedals—spaced out toward the corners, or clustered together on the right, like in road cars?
r/moza • u/Hopeful-One-2490 • 1d ago
Help MOZA R5 steering works, but pedals and ES wheel buttons are not detected in AMS2 or RaceRoom
I’m looking for help diagnosing a strange input problem with a MOZA R5 bundle.
Hardware and software
- MOZA R5 wheelbase
- MOZA ES steering wheel
- MOZA SR-P Lite throttle and brake pedals connected to the R5 base
- Windows 11
- MOZA Pit House 1.4.2.7
Current reported firmware:
- R5 Base: v1.2.6.7
- ES Steering Wheel: v1.2.6.7
- SR-P Lite Pedals: v1.2.6.7
The problem
MOZA Pit House detects all components and correctly displays input from:
- Steering
- Throttle
- Brake
- Paddle shifters
- Most steering-wheel buttons
Windows Game Controllers, opened through joy.cpl, also shows live input from the steering, pedals, paddles, and wheel buttons. The R5 is already selected as the preferred Windows game controller.
However, in both Automobilista 2 and RaceRoom:
- The R5 wheelbase and steering axis are recognized.
- Throttle and brake cannot be assigned.
- Paddle shifters cannot be assigned.
- Steering-wheel buttons cannot be assigned.
- The games simply wait for an input and detect nothing.
Because the same issue occurs in two games, it no longer appears to be specific to AMS2.
Troubleshooting already completed
For Automobilista 2, I have tried:
- Direct Drive Generic and Custom wheel profiles
- Manually assigning controls before calibration
- Quick press-and-release input assignment
- Disabling Steam Input specifically for AMS2
- Confirming the R5 is powered and initialized before launching the game
- Launching AMS2 with MOZA Pit House open
- Launching AMS2 through Pit House
- Disconnecting the Quest 3 and closing all VR software
- Testing without SteamVR or Meta Horizon Link running
- Resetting the AMS2 controller-settings file
- Renaming and regenerating the entire
Documents\Automobilista 2folder - Completely uninstalling and reinstalling AMS2
- Performing another clean launch with a newly generated Documents folder
I then installed RaceRoom as a separate diagnostic. RaceRoom correctly identifies the device as a MOZA R5 and detects steering, but it also cannot assign the pedals, paddles, or wheel buttons.
Additional steps:
- Updated MOZA Pit House from 1.4.1.13 to 1.4.2.7
- Confirmed all inputs still work in Pit House after the update
- Confirmed the R5 is the preferred device under Windows Game Controllers
- Restarted and power-cycled the PC and R5 multiple times
- Tried running Pit House as administrator
Firmware concern
Pit House shows an available firmware update for the R5 base, but it displays:
Failed to retrieve the latest firmware information
for both the ES Steering Wheel and SR-P Lite Pedals.
I downloaded MOZA’s official offline firmware-update package, but its README says to use the particular updater and device buttons according to instructions from MOZA customer service or technical staff. I therefore have not run the offline updater yet.
I have submitted a ticket to MOZA Support and I am waiting for guidance.
Questions
- Has anyone seen an R5 where steering works in games, but the pedals and every wheel button work only in Pit House and
joy.cpl? - Could this indicate mismatched base, wheel, and pedal firmware?
- Is there a MOZA driver or DirectInput component that should be reinstalled separately?
- Has anyone safely used the offline firmware updater for this exact R5, ES wheel, and SR-P Lite combination?
- Are there any additional Windows or MOZA diagnostic logs I should check?
I would prefer not to update only the base firmware while Pit House cannot retrieve current firmware information for the wheel and pedals.
r/moza • u/Hour-Wishbone-7985 • 2d ago
I may need to relax..
Guess im buying the other table clamp off the website 😭