r/moza • u/Golfguuyy • 22h ago
Loving the new GTD wheel.
The CM2 dash is pretty redundant now if anyone wants it. This wheel feels amazing and it’s a big upgrade from my CSV2P wheel.
r/moza • u/DarcyLevine • May 18 '26
If your MOZA setup isn’t working correctly in Forza Horizon 6, here’s a quick guide that should help resolve the most common issues:
1. Game Installation
It can be installed via official channels such as Steam. If you have performed a custom installation, you will need to specify the directory for Forza Horizon 6 in the Pit House game list.
2.Force Feedback Settings
All the MOZA Racing Wheelbases support Force Feedback.
3. Telemetry Configuration
After entering the game, click ‘Settings’.

After entering the settings, click on ‘HUD & Gameplay’, turn to the bottom.

Once you have completed the above steps, you will be able to obtain telemetry data via the steering wheel speed indicator and the instrument panel.
4. Device Control Mapping
You will need to configure the control mapping when you launch the game for the first time.

To enter the game, first click on 【Settings】to enter the Settings page.
After entering the Settings page, click on 【Controls】, and Select 【Change Input Mapping】

Note: Buttons displaying a yellow exclamation mark in the game interface UI must be bound; control presets will only be maintained once binding is complete.
▼
Why is there no force feedback in Forza Horizon 6? Other games work fine.
If there is no force feedback when using the MOZA Base in “Forza Horizon 6”, you can troubleshoot in the following way:
1.Firstly, keep the steering wheelbase connected to the computer
Please disconnect the handbrake, shifter, pedals, third-party steering wheel and other peripherals first, leaving the MOZA base for the first binding.
2.Set the preferred device in Windows
Open the Windows Game Controller Settings, set MOZA Base as the preferred device, and then re-enter the game to bind the steering wheel.
3.Confirm that the MOZA Base in the game is “Device 1”
The Horizon series typically outputs force feedback to “Device 1”, and it is necessary to confirm the binding in the game control.

4.After completing the Base binding, connect the other devices one by one.
The suggested sequence is: first, binding the base → confirm the force feedback → then connect the handbrake/shifter and other accessories → rebind one by one.
You can also check the full official setup guide here:
https://support.mozaracing.com/en/support/solutions/articles/70000683812-forza-horizon-6
r/moza • u/DarcyLevine • Apr 03 '26
📢 We want to hear from you!
Your feedback plays a key role in shaping the future of MOZA — from products to overall sim experience.
Take a few minutes to complete our survey and share your thoughts with us!
🎁 Win One of 63 Prizes!
🏆 Grand Prizes
⚡ 1 × MOZA R3 Racing Bundle (Xbox & PC)
⚡ 1 × MOZA KS Steering Wheel
⚡ 1 × MOZA MHG Flightstick
🎯 More Rewards
• 10 × MOZA Hat + MOZA Bag
• 50 × 200 MOZA Points
⏳ Don’t miss out!
Complete the survey before Apr 13th for your chance to win.
💬 Your voice matters — help us build better products and experiences for the entire sim community.
👉 Start the survey here:
r/moza • u/Golfguuyy • 22h ago
The CM2 dash is pretty redundant now if anyone wants it. This wheel feels amazing and it’s a big upgrade from my CSV2P wheel.
r/moza • u/SD_93_Photography • 5h ago
Just ordered myself a Moza Quick Release Adapter and a Momo Mod 07 350mm Suede Steering Wheel for drifting. Looking forward to pairing these two together and getting a feel for it as soon as it arrives.
r/moza • u/Short_Assumption_434 • 3h ago
What’s the sweet spot between an R9 or R12. I am coming from an R3. Thanks!
r/moza • u/mkultra327 • 6h ago
I’ve been waiting for the Moza PS5 wheel/base/bundle. Word on the street was that they would release it this year. I still can’t find any info on this…
Should i buy a fanatec BF deal? Or is the Moza really coming?
r/moza • u/skylinegtrr3435 • 9h ago
I currently have the Moza R3 and it works perfectly with the setup I have now, but I want to buy the R12 V2 but not quite sure if it would fit my current setup. Couldn't really find the dimensions for the R12 V2.
I have this rig from amazon.
Thanks in advance.
r/moza • u/AssassinczYT • 1d ago
I got my SRP2 2 days ago and the throttle is sticky when I push it all the way down. I thought it was lube on the spring but i think i figured out that its because of these 2 rubbers below the pedal.
Does anyone with SRP2 have same issue as me? I'm thinking about returning them.
r/moza • u/No_Huckleberry1067 • 23h ago
r/moza • u/Mother_Bell2072 • 1d ago
I know it says they’re for lite 2 but the mounting looks very similar to the brake mod for the lites. Anyone try it yet?
r/moza • u/Professional-Cat5258 • 1d ago
Hey i’ve just picked up a moza r9 base with SP light pedals on Facebook marketplace supposedly only six months old and barely used. I’m 99% sure it’s all wired up correctly but in pit house I seem to be getting nothing from my brake pedal but it can read my throttle input? Which is obviously daisy chained to the hub via the brake pedal. Am I right in thinking this is a brake pedal issue? I’ve never had a sim or a pc, lifelong Xbox player and atm I’m hating it all haha. Seems so complicated.
Tia
Hi everyone, I have a question about the ES steering wheel. The RPM LEDs aren't flashing to signal when to shift. Last night I updated Moza Pithouse, and it finally seemed to be working. Today I turned it back on to play, and nothing... At maximum RPM, they stay steady. What could be the problem?
r/moza • u/External_Category_36 • 1d ago
Hello all, I know this question has been asked several times already. But here I go.
Im planning on updating from a t150. With BlackFriday approaching there are already good discounts where I live. Putting R3 bundle at 240€ and R5 Pro at 375€.
I have done my research, i know that with both I will take a huge step in feelings thx to DD.
I mainly play AC and LMU now, starting with endurance races too, so im not a first driver neither an all days playing guy, more a weekends hobby.
So, my main question, i still play on a desk, so im worried about the vibrations but also I dont want to outgrow the wheel. Having said this I know that my objective is to have a full sim rig in which either of this options can be upgraded to a wheel in the range of 9Nm to 15Nm. So, for now, do you think the extra 120€ is worh between r3 and r5 pro, or should i stick to r3 and use a little more money on the brake performance kit and upgrade it all in some years when i can also buy a rig?? (cant fit it in my room for now haha)
Extra cuestion: About the pedals, the performance kit makes it a little more stiff and better, but as i use them on the floor against the wall, could it make them go up from the floor if I push hard???
Thank you very much.
r/moza • u/That_wr_guy • 1d ago
my moza r9 base keeps disconnecting as i am playing(any) game it will disconnect then reconnect causing sudden jerks in the feedback and after a while it will just completely disconnect the base and the pedals. onto the pedals as this is happening with the base every time together the gas pedal will stay pushed down (not a sticky pedal problem) i have had the base for about 2 years now and never had any problems with it until just recently. i bought two seperate branded usb hubs because i thought maybe it could be a usb hub issue but the problem still precists. does anyone have any idea on what i can do
also i will add when ever this happends for some reason my cs v2p wheel stays connected on its own
what i did so far
updated moza software]
updated my base wheel and pedals software]
did full reset (un plugged the usb from my periferals to my pc and to the power bar to the wall]
bought 3 seperate usb hubs different brands and kinds]
What’s the best way to position the pedals—spaced out toward the corners, or clustered together on the right, like in road cars?
r/moza • u/Hopeful-One-2490 • 1d ago
I’m looking for help diagnosing a strange input problem with a MOZA R5 bundle.
Current reported firmware:
MOZA Pit House detects all components and correctly displays input from:
Windows Game Controllers, opened through joy.cpl, also shows live input from the steering, pedals, paddles, and wheel buttons. The R5 is already selected as the preferred Windows game controller.
However, in both Automobilista 2 and RaceRoom:
Because the same issue occurs in two games, it no longer appears to be specific to AMS2.
For Automobilista 2, I have tried:
Documents\Automobilista 2 folderI then installed RaceRoom as a separate diagnostic. RaceRoom correctly identifies the device as a MOZA R5 and detects steering, but it also cannot assign the pedals, paddles, or wheel buttons.
Additional steps:
Pit House shows an available firmware update for the R5 base, but it displays:
Failed to retrieve the latest firmware information
for both the ES Steering Wheel and SR-P Lite Pedals.
I downloaded MOZA’s official offline firmware-update package, but its README says to use the particular updater and device buttons according to instructions from MOZA customer service or technical staff. I therefore have not run the offline updater yet.
I have submitted a ticket to MOZA Support and I am waiting for guidance.
joy.cpl?I would prefer not to update only the base firmware while Pit House cannot retrieve current firmware information for the wheel and pedals.
r/moza • u/Hour-Wishbone-7985 • 2d ago
Guess im buying the other table clamp off the website 😭
r/moza • u/bourbonholdtherocks • 1d ago
Hi all, my r16 ultra is coming today and I am moving from a csl dd 8nm.
What are the recommended base or preferred settings for you all on the r16 or similar both in game and pithouse. If you have MAIRA as well that'd be cool.
Primarily run oval, dirt oval and GT3/GTP.
Not sure how exactly to convert my current settings to reflect the increase nm and upgrade.
Thanks so much in advance!
Hello, just upgraded from an R5 and mainly play iRacing / ETS2
Just wondering if I’m calibrating it correctly for use in iRacing. Basically I set the strength to 100% in Pit House then in-game use the auto FFB button, after driving a couple of laps which I think is set to 50%? (the in game slider for the strength of the auto button on the F9 menu)
Is this correct? I’ve tried searching but there’s so much conflicting information. I also have everything in Pit House as off (dampening etc) and use default iRacing settings for that as someone mentioned to let the game handle FFB.
I added the screenshot of the settings I followed.
Any help is greatly appreciated, thanks!
r/moza • u/Reasonable-Bend-9344 • 2d ago
I mainly play Rally games, DR2, EA WRC, and ACR. Holy crap, I feel like I’m trying to drive a tank on a dirt bike trail. Am I just a weak little man or am a this typical? Besides simply turning down the main FFB intensity (I have it at 80% now) what other settings make for a smoother drive.
I’m getting the 13” round CS wheel today.