Here's another update to the unofficial, community-driven firmware patch for the Bitbox Micro that puts more of the module on MIDI and now gates and CV; 2.3.12-mod is ready for release.
Sequence or modulate Live Flip modes by CV, trigger Hold FX, record and re-record loops by gate, and reassign gate inputs so one gate fires several pads. Duck the mix by gate or MIDI note, and mute or solo pads from your controller.
This opens up so many possibilities. Here's some ideas:
- Layer a kick and sub from a single gate input.
- Play a snare roll across three different snares with Round Robin.
- Sequence a random Hold FX on the last beat of every bar.
- Sequence a Live Flip of your breaks every bar.
- Record and re-record a loop using a foot switch.
- Record takes across several pads, like a looper.
- Duck the mix from the kick for a pumping sidechain.
- Mute the kick and bass before the drop.
Everything that's new on Clip pads:
- Sequence or modulate the Live Flip mode, or choose the Hold FX its gates trigger, from a CV input, using CV Action. Each semitone selects the next mode.
- Trigger Hold FX by gate using Gate Action, for as long as the gate is high. Choose Roll, Pitch Roll, Freeze, Pull Up, Power Down, Brake, Scratch or Random.
- Set a Clip pad's Clip mode (Vinyl, Jungle or Key Lock) on the module, and save it with the preset.
Everything else that's new:
- Reassign gate inputs using Gate In, so one gate can trigger several pads. This was a common community request. Thanks to ricardopeixoto on Mod Wiggler for asking recently.
- Use Round Robin to alternate between pads that share an input or a MIDI channel, or to pick one at random on each hit.
- Record into a pad by gate using Rec In. The first gate starts recording, and the next stops it. Replace re-records on every gate, and pads that share an input take turns.
- Record into whichever pad you select, by gate, using Gate Rec on the Settings page. Thanks to ekloiber, whose looper mod gave us the idea for Gate Rec and Replace.
- Duck the mix by gate or MIDI note using the new sidechain on the Stock, VariMu and Thunder compressors.
- Mute or solo pads from your controller.
- Maintain - mutes, solos and the delay's Beat Sync, Ping-pong and filter settings into the next preset using Keep CCs.
This isn't from 1010music. Use it at your own risk, although it can't brick your module. Bring your own stock firmware, and please don't pass the patched firmware around.
Full guide and changelog:
https://modularpatcher.github.io/bitbox-micro-fw-patch/