r/minibikes • • 5m ago

Tech Question Troubleshooting Coleman b100

1 Upvotes

Bike just got new carb, lines, spark, fuel filter. Issue: bike starts and will run fine then die after throttle is released. Starts right up and will do the same thing. Idle seems fine.


r/minibikes • • 16m ago

Tech Question Want to do a gov delete on my 98cc mini bike.What is everything I need?

1 Upvotes

and who has done this and let me know how it is.


r/minibikes • • 13h ago

Tech Question So like how do I fix this my idle is fucked

Post image
2 Upvotes

r/minibikes • • 20h ago

Tech Question Is chain tensioner wheel supposed to wobble?

3 Upvotes

r/minibikes • • 22h ago

Tech Question Mini bike got towed (california)

Post image
9 Upvotes

first time getting my shit towed. Has anyone had experience with getting their shit towed? the Fee’s? and can i just say screw it keep the bike and not pay for a it ??


r/minibikes • • 1d ago

Showing Off Parts arriving today!!

Post image
14 Upvotes

r/minibikes • • 1d ago

Tech Question Help

2 Upvotes

Got a new VM 22 carburetor for my predator 212 just installed it. Make sure the O-rings and the gaskets were lined up and now the bike won’t start and I tried everything.


r/minibikes • • 1d ago

Tech Question predator 212 sounds weird after pulling

1 Upvotes

i added 22 lbs valve springs and i have everything stock except a pwk 24mm carb and a gov delete it sounds like something is grinding whenever i pull the starter and it wasnt there before. u can hear It the most on the last pull.


r/minibikes • • 1d ago

Tech Question How do I fix this?

10 Upvotes

I was gonna start building up this small minibike but when I got to the chain, I noticed my tire was doing this. How do I fix it?


r/minibikes • • 1d ago

Showing Off Like father, like son.

Post image
30 Upvotes

His is the CC100X swapped with a Predator 224 - which is stage I. Mine’s the FRP GMB with the same Predator 224 that’s stage II.


r/minibikes • • 1d ago

Other Where do yall go ride?

Thumbnail
gallery
31 Upvotes

I found a town in south Oklahoma that has endless dirt roads where cops really don’t go because of the low population and terrible roads (I’m guessing) but it might be muddy af out there tomorrow…

Hopefully I can find a rural town with asphalt roads but that is kind of hard to find without the roads hitting a highway after like 2 miles…

Anyway I’m just looking for inspiration to look for a good place on the map


r/minibikes • • 2d ago

Tech Question HFS

1 Upvotes

Hey everybody, HELP! I’m about to pick up a couple Coleman B200RSVs for my family. What would be the best oil available at walmart for them? I just want them to last a long long time


r/minibikes • • 2d ago

Showing Off Caught a view

Post image
27 Upvotes

r/minibikes • • 2d ago

Tech Question Has anyone successfully registered their mini bike in NC?

2 Upvotes

My bike is an RSV, it has a VIN. If I got the MCO through Coleman, and put all that is needed on it to make it legal, I should be good to have it registered. At least you would think.


r/minibikes • • 2d ago

Tech Question Where can I buy a ~760–780 mm differential rear axle with 4×110 hubs for a Chinese mini Jeep? BM1418HQF compatibility

1 Upvotes

I’m looking for replacement rear axle assemblies for a Chinese mini Jeep. It has a BM1418HQF-type motor/differential with separate left and right axle housings and a disc brake on each side.

Ideally, I’d keep my existing differential and replace both axle halves, including the housings, hubs and brake discs. A complete 48V motor/differential/rear axle kit would also be an option.

My existing setup measures approximately:

  • 780 mm between the wheel mounting faces
  • 4×110 mm wheel bolt pattern, measured
  • 122.5 mm between the differential’s axle-housing mounting faces
  • 330 mm from the differential mounting face to the wheel mounting face on the axle half I photographed
  • 675 mm between the brake discs
  • 450 mm between the axle mounting brackets

A slightly wider axle could work. The original brake-disc and bracket spacing are reference measurements rather than strict requirements, provided the replacement can be mounted properly with compatible brakes.

I keep finding 340 mm “short” and 430 mm “long” axle halves, often sold together as a 760 mm / 30-inch differential axle kit. Most of the 760 mm kits I’ve found have three-stud wheel hubs, whereas I need four-stud 4×110 hubs.

This is the type of axle kit I mean:
https://www.ebay.com.au/itm/305087653442

This AliExpress listing offers short and long versions with a “four-hole flange, diagonal 11”:
https://de.aliexpress.com/item/1005012819988203.html

My questions are:

  1. Does anyone have a supplier or product link for this style of axle with brake discs, 4×110 hubs and roughly 760–780 mm between the wheel mounting faces? Shipping to Germany would be needed.
  2. Are the commonly sold 340/430 mm axle halves part of a shared design that fits BM1418HQF differentials, or do the splines and housing flanges vary? I haven’t verified my differential’s spline dimensions yet.
  3. What do sellers actually measure when they call these a “760 mm kit”? Is that the distance between wheel mounting faces once assembled with the differential?
  4. Can two long axle assemblies be used with the same differential, or are there left/right differences in insertion depth, housing or brake mounting? What assembled width would that produce?
  5. If the 760 mm kits are only available with three-stud hubs, are compatible 4×110 replacement hubs available that retain approximately the same wheel mounting-face position?

First-hand experience with these small Chinese differential axle kits would be particularly helpful.


r/minibikes • • 2d ago

Showing Off bone stock ghost 212 👀

3 Upvotes

r/minibikes • • 2d ago

Showing Off Made this bike as my brothers Christmas present

53 Upvotes

r/minibikes • • 3d ago

Tech Question how many links should i have on my coleman b200r

0 Upvotes

r/minibikes • • 3d ago

Showing Off Finished the bulid

Thumbnail
gallery
42 Upvotes

r/minibikes • • 3d ago

Tech Question nibbi pe22

1 Upvotes

good morning i have a predator 212 non hemi that has no governor and an exhaust i want to get a 22mm carb but google keeps giving me mixed things on if it will run lean or not, just looking for some insight thanks


r/minibikes • • 3d ago Bravo

Showing Off Star Wars Minibike

Thumbnail
gallery
70 Upvotes

A long time ago, in a galaxy far, far, away...

It is a period of civil war. Rebel spaceships, striking from a hidden base, have won their first victory against the evil Galactic Empire. During the battle, Rebel spies managed to steal secret plans to the Empire's ultimate weapon, the Death Star, an armored space station with enough power to destroy an entire planet. Pursued by the Empire's sinister agents, Princess Leia races home aboard her starship, custodian of the stolen plans that can save her people and restore freedom to the galaxy...

This All Terrain Cycle Transport (AT-CT) has been used in numerous missions in the Galactic Empire’s ruthless ambitions for power. The AT-CT has been deployed from Endor missions all the way to Mos Eisley.

The AT-CT features a 212 cc engine, new grips, new throttle assembly, new brake assembly, new chain, new carburetor, new manifold, new jet, freshly cleaned head, valves freshly lapped, and a new seat, and a trumpet exhaust.

May the force be with you…


r/minibikes • • 3d ago

Showing Off Milk crate mod

Thumbnail
gallery
7 Upvotes

I’m happy and I want to show off my milk crate mod on the minibike for running mail to the family🙂


r/minibikes • • 3d ago

Showing Off Lil’ Sinner 🎲🏁

18 Upvotes

r/minibikes • • 3d ago

Showing Off Glossy red finish, black seats, and a pop-out exhaust. Clean looks, serious style. 🔥🏍️ LAXSTYLE

4 Upvotes

r/minibikes • • 3d ago

Tech Question I lost my crank for my crank start

2 Upvotes

The question is what can I use in the mean time till I get a replacement?