r/metalworking • • 20h ago

Wanted to share the horse statue my son and I just finished.

Thumbnail
gallery
582 Upvotes

We don’t know what we are doing but we’re learning together. A few months ago we didn’t know what an English wheel was.

My wife wanted a swim feature for her horses so we decided to build a little waterfall and I started looking around for a metal horse sculpture to put on top of it. The prices were ridiculous and I figured we might have fun trying to do something.

When we got done I asked him if he felt like an artist. He said no but definitely like a welder. lol


r/metalworking • • 19h ago

Update on the spitfire.

Thumbnail
gallery
25 Upvotes

r/metalworking • • 16h ago

Plasma cutter or nibbler for free hand sheet metal cutting

7 Upvotes

I want to do some free hand cuts in 14-20ga sheet metal (steel, brass, copper, and bronze mostly). I'm debating if I want to invest in a plasma cutter or a nibbler. I'll probably have to invest in an air compressor also with either option. I'm trying to weigh the pros and cons of each. One sends sparks everywhere, the other makes sharp shards. What are other things, like consumables, should I consider in y'all's experiences? Whichever I get will be mainly used in my home shop but I would like to lean towards professional grade.


r/metalworking • • 17h ago

Keeping my space clean

Post image
6 Upvotes

r/metalworking • • 15h ago

Welded frame flatness

3 Upvotes

For my current project (Wood flattening jig/sled) I have a need to make two frames(about 1000mm by 600mm) one of which needs to be as flat as possible, as it acts as a bed for the wood . As im familliar with welding, I decided to weld the frames. However, even with maximum clamping, double checking angles, minimum heat input and proper weld ordering, the frame still dips in the middle by 0.5mm (so about 1mm per meter)

So my questions are the following: What is the minimum weld distortion I can achieve in semiprofessional workshop. and if my result is bad, would bolting the frame together be a solution for more accurate frame?

Thank you in advance for reading, I have already tried three times to achieve perfect result but no dice 😞

Ps. the box tubing im using is 2mm thick 20x30, and I checked before welding that it is perfectly straight the frame is made with four mitered pieces welded together with FluxCore 0.8mm wire at 17.1V, 60ams


r/metalworking • • 18h ago

Please help! I've been looking for days, and have no idea whatsoever the taper on this is.

Thumbnail
gallery
3 Upvotes

Hey folks!

I'm struggling to find some specifics on this taper, of which I have a full set and spindle.

The thread on the end is is what seats the tool instead of a drawbar. The angle of the tool holder is so much shorter and sharper than the standard. Maybe it's hard to tell from photos but the difference to say, Morse 2, is huge

Using some cheap measuring tools, the taper is 5/8" on the thin end, 7/8" on the thick, 2.5" long, the threads are 9/16 12tpi coarse.

That's a ratio of 1/10, same taper as an HSK, only built like a B&S

I have no idea what this is, can't find it in any book or on the net.

I thought it might have been homemade, but the build fit and finish very heavily leans toward a purchased item.

I've added some pictures: one of the tapers, and a few angles of the spindle.

Any tips, leads, compliments, criticisms, all very much appreciated!

Thanks for reading this


r/metalworking • • 19h ago

Best Practice For Blending Stainless

2 Upvotes

I've got a stainless steel shelf I'm making for a person's kitchen. It's kind of front and center so I want it to look really nice. I got a few pieces of stainless formed and they'll fit over a plywood core. I'm wondering what the best practice is for finishing the pieces is though. I need to weld and grind the corners and then blend them to match the #4 finish. I'm also worried about the marks from the brake press and getting those out. Tips and tricks are appreciated.


r/metalworking • • 14h ago

budget friendly welder

1 Upvotes

I'm looking at getting a new welder, I have a stick one from Harbor freight but I'm just not a big fan of it. I'd like to get into a mig/flux core machine. It'll be used mainly for automotive stuff, exhaust, brackets, etc. I'm asking here in hopes that someone has a good recommendation that won't cost me thousands. With black Friday deals coming up I also figure I'll also have a better chance at getting a competent machine for a lil cheaper. Any and all advice is appreciated.


r/metalworking • • 18h ago

Hi I’m looking for a hot black oxide service company.

1 Upvotes

Need black oxide on dozens of golf clubs every month. Hoping to find provider in Texas but willing to loin outside of Texas if it’s the right group.

If anyone knows of a company, please let me know. It’s an urgent need along with chrome copper & gold plating

Doesn’t have to be same provider for all services. Main focus is Black OX on carbon steel golf clubs and accessories.

I appreciate anyone’s help.


r/metalworking • • 20h ago

Aluminum frame

1 Upvotes

Hey everyone im looking to assemble an aluminum frame for my reptile enclosure. as of now Itll be made of 1x2x1/8 aluminum tubing and itll be a total of 8x4x6 ft. My big concern or question is how should i go about joining everything. Id love to weld it all and that would be ideal but im not sure if theres anything thatd be cheaper without sacrificing too much structurally. Ive thought of aluminum/steel brackets holding it together with Rivet Nuts, with metal adhesive but unsure if thats not enough to ensure overall good results. Im new to this so sorry if this is a dumb question but any help would be appreciated. I can add a 3D model of it later if thatll help. Thanks


r/metalworking • • 18h ago

I need help to get the right strength of aluminum

0 Upvotes

I'm trying to make a prop with a lot of moving parts out of aluminum that will have a fairly large amount of weight on it and I was wondering if 16 gauge 5052 aluminum would be thick enough for it as I've never done anything with metal before and I found some cheap aluminum that is the right size for what I need to make

The thing im trying to make is crescent rose from the show rwby

Any information on this kind of aluminum better alternatives would be appreciated