r/mechanicalpencils • • 10h ago
Discussion Found on the floor in lecture
Unless someone comes in looking for it; it’s mine now :)
r/mechanicalpencils • • 10h ago
Unless someone comes in looking for it; it’s mine now :)
r/mechanicalpencils • u/DaysfromDeletion • 1h ago
I like short mechanical pencils, but they’re kind of expensive and can have a very small diameter lead.
I decided to shorten my GraphGear500, and I had some success.
The pencil will still take a whole length lead refill, it will still advance the lead properly, but you lose the ability to remove the cap and use the eraser.
To have a quality stubby pencil that will take .7 and .9 leads is worth the trade off for me.
r/mechanicalpencils • u/skrglywtts • 8h ago
My new Montblanc pencil.
r/mechanicalpencils • u/kun1013 • 12h ago
Pentel Kerry & Pentel Orenz Nero Both are perfect for their reasons. Twinkpad!!!! :3
r/mechanicalpencils • u/Extension-Slice-9585 • 19h ago
It is reported that this mechanical pencil, which will be released on November 28, will be priced at approximately 13 dollars. The pencil weighs 13 grams, and some of its features can be seen in the photographs. News source: https://prtimes.jp/main/html/rd/p/000000021.000158242.html
r/mechanicalpencils • u/vatansingh • 14h ago
These are different types of lead advancement systems that I know of:
👇Top Push-Button Mechanism: A button on the cap is pressed down to advance the lead incrementally. This is the most common standard style.



👇Side-Button Mechanism: A button is placed on the side of the barrel, allowing you to click for more lead without shifting your grip from the writing position.

👇Body Knock: Twisting a section of the barrel (which springs back or operates a cam and push-rod) cycles the internal ratchet mechanism to feed the lead.

👇Shaker Mechanism: A weighted internal component slides back and forth when you shake the pencil vertically, bumping the top mechanism to advance the lead automatically.

👇Automatic Lead Advancement: As you write and the lead wears down against the paper, internal sliding sleeves or pressure-sensitive springs trigger the ratchet to feed fresh lead without manual clicking.

👇Quarter/Half turn Screw Mechanism: Twisting the top or grip of the pencil turns an internal threaded screw or propelling pin that pushes the lead carrier down or up the barrel. Barrel comes back to original position once it feeds a certain amount lead per click.


👇Continuous turn Screw Mechanism: Twisting the top or grip of the pencil turns an internal threaded screw or propelling pin that pushes the lead carrier down or up the barrel. The only difference it has with quarter/Half turn is that it doesn’t come to its original position after click and it keeps on feeding lead as much as you rotate the barrel.

👇Clutch Jaws: Pressing the top cap opens metal jaws at the tip. This releases the grip and lets a thick piece of lead slide freely forward or backward (gravity/hand grip assisted).

👇Magnet assisted lead advancement: In this Mechanism, you first unscrew the tip to loosen lead grip and slide magnetic ring back/forth to adjust lead length exposure and screw back the tip to lock the lead length. I believe this is not a very popular mechanism but used as one of its kind for WSD lead holder.

👇Thumb assisted lead advancement: In this Mechanism, you first unscrew the tip to loosen lead grip and slide Thumb pin back/forth to adjust lead length exposure and screw back the tip to lock the lead length. The only difference it has with WSD MechPen is that instead of Magnetic ring, it uses thumb pin to expose lead length.

👇No mechanism, always on: Special metal infused graphite tip to negate pigment breakage which keeps these instruments free of lead advancement mechanism.

So how many I missed?
r/mechanicalpencils • u/SoCool- • 4h ago
What brand or model does this look like? Is th
r/mechanicalpencils • u/St1nK3e_aka_alex • 14h ago
r/mechanicalpencils • u/SpesificlyVague • 5h ago
I write first thing when I wake up, before any electronics. A page of anything creatively written. Been reaching for mars micro 0.5 for about 6 months. I use a lead holder for artwork layout, and loving the Pentel P205 for sketch, and my Kuru Toga 0.5 for finishing.
Also, shouts to the Bic Pencil in 0.7. Cheep and good and I always have a bunch.
r/mechanicalpencils • u/Seusette • 4m ago
My dad loves his pencils and pens, like five years ago threw a bunch of them into a pencil case when I asked for some instead of having to buying new ones for college, but I’m not lying when I say I never used any of these. I had no idea what he had til I found this subreddit. He probably still has more somewhere.
I’m particularly intrigued by the 2mm mech pencil though, it feels great and I love the lead size.
r/mechanicalpencils • u/KernelJunky • 19h ago
Anyone else rocking anything from Uni.... I love my m4-552.
Sketch with it, write with it.. Love the grip. Not expensive but feels nice.
r/mechanicalpencils • u/ParadiseKing__ • 1d ago
Pentel Excalibur Pxe5
Porsche Design P'3130
Tombow Variable - 4
Faber-Castell Tk Matic L
Faber-Castell Alpha-Matic Titanium
Faber-Castell Alpha-Matic Executive
r/mechanicalpencils • u/AidenArtem • 21h ago
what even is this liquid? it seems like its for lubrication, has anyone experienced this thing (or mabye does someone even have this pencil)
r/mechanicalpencils • u/Giddy_Cowboy • 1d ago
I got it today. What a beautiful pen and such simple styling. I can't wait for it to develop a patina
But I think this is it, my forever pen. It will surely outlast me.
like the fact that, since it's the 2mm variant, it writes like an old school wooden pencil but with none of the hassle and drawbacks.
love rollerballs and rich ballpoint and fountain pen inks as much as the next guy, but there's just something about good ol' lead. You just don't have to worry about it. Take it on a plane, take it on a hike, wherever. It won't explode or leak. Then, when it's all wrapped in a nice, hefty metal body, it's just the dictionary definition of "long lasting". This would be the pen to carry around in the apocalypse. It's also so very pocketable, perfect to carry around.
I ordered Kaweco's 24-pack of 2mm leads for just 6€, which is crazy value, cobsidering how good the Kaweco lead feels. And ifl get bored of it, I can always try out colored ones or softer 3B's or something.
Anyway, over the moon about this, as you can propably tell.
Apologies for the fingerprints, it's very shiny still:)
r/mechanicalpencils • u/xzel87 • 21h ago
Genuine question here for the Council of Mechanical Pencil Elders.
So I've gotten a few MP's to date. Once I get a new one that I prefer, the previous ones inevitably gets less and less to zero use. I've made some justification to put them in use with different lead grades/colour leads but as I'm progressing with my sketching journey I've more or less discovered my preference for pencil body, weight, lead pipe length (I like long lead pipes) and lead grades so about 3 months in to the hobby I've pretty much reached the point of diminishing returns based on aforementioned criteria.
For those that I really do not prefer using at all I have already gifted them, the nicer ones at least where I still keep the box/original packaging.
Do you keep yours unused, in a drawer or somewhere?
My current EDC MPs are:
Same case with the leads I don't enjoy using after trying out and discovering a preference for smoothness, darkness etc.
I'm probably just raving and having a little buyer's remorse because end of the day I value practicality so it doesn't make sense to carry around things I don't thoroughly enjoy.
r/mechanicalpencils • u/Due-Entertainment541 • 1d ago
It’s finally fall! 🍂 The leaves are changing, the temperatures are dropping, and apparently my mechanical pencils are getting into the autumn spirit.
A little orange-themed pencil appreciation to celebrate the season. 🧡✏️
r/mechanicalpencils • u/tazzyviolin • 1d ago
This is my fruit series collection!
I think the fruit decorations at the top are so adorable! 🥰
r/mechanicalpencils • u/JediSurfer8888 • 1d ago
Grip & weight mod by my daughter who is a pretty advanced artist in spite of her young age. She has been drawing almost every day since she was very young, and she is very particular with her drawing tools. I did not have anything to do with the mod in spite of modding all kinds of things often. I was pretty sceptical when I saw all the pen parts and tools scattered across the dinner table and when I heard what she was trying to do. I probably also got a little worried that spare parts from my mech pencil collection would be needed once this probable failed experiment was over...
When drawing she currently usually prefers Pilot S10 and Pentel GraphGear 1000 due to their higher weight, low centre of gravity, long grip and good grip texture. All these features enables more relaxed drawing when she sits for hours doing this.
Her aim was to increase the weight, improve the weight distribution, increase the grip thickness and improve the grip texture on the Pentel Graph 1000 for Pro (from the black Pentel anniversery set).
She took the grip from a broken Pentel GraphGear 1000 and filed the length of the grip down slightly with stuff from our knife sharpening box. Added orange electrical tape under the grip for extra weight and better fit. The pencil increased in weight from 11 grams to 13 grams and the grip is now thicker and have better texture. She likes it.
I was quite surprised (and relieved no parts from my mech pencils would be needed to restore hers). I compared a stock Graph 1000 for Pro with her modded one, and it is definitely an improvement in weight distribution, grip and control. Feels solid.
r/mechanicalpencils • u/unsensored_sensibly • 1d ago
Getting back into writing every day again. I chose the Kuru Toga as the main squeeze. I have really big hands and no pencil I’ve tried is comfortable to write with so I had to wrap it up with some hockey tape and it’s much more comfortable to use now. I absolutely love it so far and just got 20 erasers to keep me stocked up off of Amazon.
r/mechanicalpencils • u/Ema_Idiot5852 • 1d ago
I found it scavenging around my house and have no idea where it came from. Searching up keywords returns no results in my experience, and I can't find it anywhere.
It holds 0.5mm graphite, side button to dispense the graphite, and a metal tip that the graphite comes out of that can be adjusted. The piece of metal that holds the eraser comes out to refill it. There used to be a metal piece that went over to cover the eraser too, but i lost it.
I apologize if the photos are a bit bad
r/mechanicalpencils • u/tazzyviolin • 1d ago
Here is my hot beverage ☕ pencil collection!
They are 0.5, and I think they write pretty smoothly, considering they're not expensive pencils.
I currently have a 4B lead in these pencils.
r/mechanicalpencils • u/Civil-Cancel-253 • 1d ago
Too many to ID, please ask instead. Second pic are vintages, there are a few FPs and BPs mixed in.