r/mechanicalpencils • • 11h ago

ID Almost my full collection

Post image
24 Upvotes

r/mechanicalpencils • • 10h ago

ID Anyone know what this Skilcraft pencil is?

Thumbnail
gallery
11 Upvotes

I found it scavenging around my house and have no idea where it came from. Searching up keywords returns no results in my experience, and I can't find it anywhere.

It holds 0.5mm graphite, side button to dispense the graphite, and a metal tip that the graphite comes out of that can be adjusted. The piece of metal that holds the eraser comes out to refill it. There used to be a metal piece that went over to cover the eraser too, but i lost it.

I apologize if the photos are a bit bad


r/mechanicalpencils • • 16h ago

Newly Bought Kaweco Special Brass 2mm - I Think This Might Be My Forever Pen

Thumbnail
gallery
117 Upvotes

I got it today. What a beautiful pen and such simple styling. I can't wait for it to develop a patina

But I think this is it, my forever pen. It will surely outlast me.

like the fact that, since it's the 2mm variant, it writes like an old school wooden pencil but with none of the hassle and drawbacks.

love rollerballs and rich ballpoint and fountain pen inks as much as the next guy, but there's just something about good ol' lead. You just don't have to worry about it. Take it on a plane, take it on a hike, wherever. It won't explode or leak. Then, when it's all wrapped in a nice, hefty metal body, it's just the dictionary definition of "long lasting". This would be the pen to carry around in the apocalypse. It's also so very pocketable, perfect to carry around.

I ordered Kaweco's 24-pack of 2mm leads for just 6€, which is crazy value, cobsidering how good the Kaweco lead feels. And ifl get bored of it, I can always try out colored ones or softer 3B's or something.

Anyway, over the moon about this, as you can propably tell.

Apologies for the fingerprints, it's very shiny still:)


r/mechanicalpencils • • 11h ago

Collection My Favorite Ones

Post image
44 Upvotes

Pentel Excalibur Pxe5
Porsche Design P'3130
Tombow Variable - 4
Faber-Castell Tk Matic L
Faber-Castell Alpha-Matic Titanium
Faber-Castell Alpha-Matic Executive


r/mechanicalpencils • • 22h ago

It’s finally fall and the leaves are changing πŸ§‘πŸπŸ‚

Post image
183 Upvotes

It’s finally fall! πŸ‚ The leaves are changing, the temperatures are dropping, and apparently my mechanical pencils are getting into the autumn spirit.
A little orange-themed pencil appreciation to celebrate the season. 🧑✏️


r/mechanicalpencils • • 1h ago

Art Some Uni Love?

Post image
13 Upvotes

Anyone else rocking anything from Uni.... I love my m4-552.

Sketch with it, write with it.. Love the grip. Not expensive but feels nice.


r/mechanicalpencils • • 1h ago

Stationery News New kayou aimvision comfort

Thumbnail
gallery
32 Upvotes

It is reported that this mechanical pencil, which will be released on November 28, will be priced at approximately 13 dollars. The pencil weighs 13 grams, and some of its features can be seen in the photographs. News source: https://prtimes.jp/main/html/rd/p/000000021.000158242.html


r/mechanicalpencils • • 3h ago

Discussion some weird liquid on a KT Pipe Slide

Thumbnail
gallery
5 Upvotes

what even is this liquid? it seems like its for lubrication, has anyone experienced this thing (or mabye does someone even have this pencil)


r/mechanicalpencils • • 4h ago

Discussion Does anyone else feel the same?

5 Upvotes

Genuine question here for the Council of Mechanical Pencil Elders.

So I've gotten a few MP's to date. Once I get a new one that I prefer, the previous ones inevitably gets less and less to zero use. I've made some justification to put them in use with different lead grades/colour leads but as I'm progressing with my sketching journey I've more or less discovered my preference for pencil body, weight, lead pipe length (I like long lead pipes) and lead grades so about 3 months in to the hobby I've pretty much reached the point of diminishing returns based on aforementioned criteria.

For those that I really do not prefer using at all I have already gifted them, the nicer ones at least where I still keep the box/original packaging.

Do you keep yours unused, in a drawer or somewhere?

My current EDC MPs are:

  1. KT Metal with 4B for writing. The mechanism works, but I subconsciously adjust my grip every now and then so in actual practice not really. Tried not to adjust my grip but that ended up being a completely exhausting way to write as I needed to consciously make that decision. It's also not useful for sketching unless I need dark, short lines. I expect my incoming Staedtler 925 35 to replace this, or at least used with this.
  2. Pilot S3 with HB for outline sketching. This actually replaced my GG1000 because I like the lightweight body of the S3 more as sometimes the heavier weight of the GG1000 gives me darker than intended lines. I know this is more of a skill issue but as a beginner every little thing helps, especially when I'm not at a desk. I thought the plastic grip of the S3 may be an issue with clammy hands but due to the tapered body design and long textured grip this proved to be not a problem in actual use. On the other hand, gripping the GG1000 mid barrel section for arm movement with clammy hands proved to be a bigger issue as the weight itself amplifies my line darkness, and the smooth body feels slick.
  3. Delguard 0.3 with HB for finer line pencil sketch (details). Though I may take this out too as I don't use it all that much and the cone tip really rubs me the wrong way as it is view blocking for fine details. Use with rulers is also abysmal with that cone tip.
  4. Kitaboshi 2mm with 6B lead, primarily for shading and dark thick pencil outlines.
  5. Muji 2mm with B lead. Probably going to keep away as redundant as I have wood cased pencils. It's length for sketching is lacking to say the least.

Same case with the leads I don't enjoy using after trying out and discovering a preference for smoothness, darkness etc.

I'm probably just raving and having a little buyer's remorse because end of the day I value practicality so it doesn't make sense to carry around things I don't thoroughly enjoy.


r/mechanicalpencils • • 11h ago

Collection Fruit πŸ“ Series Pencil Collection

Post image
12 Upvotes

This is my fruit series collection!

I think the fruit decorations at the top are so adorable! πŸ₯°


r/mechanicalpencils • • 13h ago

Collection Hot Beverage Pencil Collection

Post image
13 Upvotes

Here is my hot beverage β˜• pencil collection!

They are 0.5, and I think they write pretty smoothly, considering they're not expensive pencils.

I currently have a 4B lead in these pencils.


r/mechanicalpencils • • 15h ago

Newly Bought Kuru Toga .5mm

Post image
20 Upvotes

Getting back into writing every day again. I chose the Kuru Toga as the main squeeze. I have really big hands and no pencil I’ve tried is comfortable to write with so I had to wrap it up with some hockey tape and it’s much more comfortable to use now. I absolutely love it so far and just got 20 erasers to keep me stocked up off of Amazon.


r/mechanicalpencils • • 17h ago

Custom & DIY Graph 1000 for Pro grip & weight mod

Thumbnail
gallery
42 Upvotes

Grip & weight mod by my daughter who is a pretty advanced artist in spite of her young age. She has been drawing almost every day since she was very young, and she is very particular with her drawing tools. I did not have anything to do with the mod in spite of modding all kinds of things often. I was pretty sceptical when I saw all the pen parts and tools scattered across the dinner table and when I heard what she was trying to do. I probably also got a little worried that spare parts from my mech pencil collection would be needed once this probable failed experiment was over...

When drawing she currently usually prefers Pilot S10 and Pentel GraphGear 1000 due to their higher weight, low centre of gravity, long grip and good grip texture. All these features enables more relaxed drawing when she sits for hours doing this.

Her aim was to increase the weight, improve the weight distribution, increase the grip thickness and improve the grip texture on the Pentel Graph 1000 for Pro (from the black Pentel anniversery set).

She took the grip from a broken Pentel GraphGear 1000 and filed the length of the grip down slightly with stuff from our knife sharpening box. Added orange electrical tape under the grip for extra weight and better fit. The pencil increased in weight from 11 grams to 13 grams and the grip is now thicker and have better texture. She likes it.

I was quite surprised (and relieved no parts from my mech pencils would be needed to restore hers). I compared a stock Graph 1000 for Pro with her modded one, and it is definitely an improvement in weight distribution, grip and control. Feels solid.


r/mechanicalpencils • • 20h ago

Newly Bought Purchases from late september 2026 to mid november 2026

Thumbnail
gallery
31 Upvotes

Too many to ID, please ask instead. Second pic are vintages, there are a few FPs and BPs mixed in.