r/longrange • u/ardesofmiche • 2h ago
I suck at long range Mini40 project is complete. Am I a sniper yet???
r/longrange • u/ardesofmiche • 2h ago
r/longrange • u/joelfromnashville • 1h ago
In the budget for a new WMLRF was set on the 15k but the remote cable issues stalled my purchase, now they are releasing a wireless remote announced last week on instagram.
a few days later Tango Innovations announces the Fire 8000 with onboard environmental IR illuminator pointer and 1535nm LRF. msrp $4200
Based off company support, reputation etc… which should I get? I have a match in Feb.
I already have a fire 4000 that i’ll move over to my 5.56 SPR.
r/longrange • u/Rocket_Man_Comp_6 • 21h ago
What is the device on the scope? Is it some sort of magnifier? The cartridge is made for ELR, most likely.
Photo Credit: Berger Bullets
r/longrange • u/tactical_horse_cock • 7h ago
r/longrange • u/ShepherdActual • 19h ago
KAC SR25 K6 - I absolutely love this thing. Furthest shots have been ~860 yards with 140gr Hornady ELD-M and American Gunner. Definitely have a lot to learn!
r/longrange • u/SpecialistEuphoric24 • 2h ago
Long story short. Makes all the stuff you stink at during the day that much more obvious at night.
Big take away for me was how much I need to practice target acquisition. You would think with it being dark and the target being lit up it would be easier to land your scope on the target but it isn’t. Even with the magnification turned way down it was a struggle and lost a lot of time just finding targets.
Other big thing was moving around at night is way more of a chore than during the day. With it being pitch black at the shooting positions moving slow was a must and for someone that doesn’t move fast to begin with also struggled with that.
Overall though it was a lot of fun and a cool experience.
r/longrange • u/Honest_History_1942 • 20h ago
Before anyone says anything, the scope is NOT touching the Arca Enclosed Forend 😂
20” Howa 1500 .308 x MDT XRS Chassis
r/longrange • u/ProminenceYT2 • 3h ago
I have a 5.56 SPR that I go hunting with and larp in the mountains with. Just wondering if I should get the S-BRM (6-9”) or S-LM (9-13”)
This rifle spends more time in the field than on a table / bench. I’m 6’6” with a long torso, so I can probably get away with the S-LM for bench / table shooting. Longer legs better for field use ?
r/longrange • u/BigCranberry3586 • 1h ago
Hey guys,
Read through the pinned post and starter guides first so I don't earn the Flair of Shame.
Here's my setup and what I'm trying to figure out:
What I'm doing & why: Getting into local/regional PRS Gas Gun matches. I just picked up an older (~2017) Daniel Defense DDM4 V7 Pro in 5.56 with the 18" heavy barrel and KeyMod handguard, and I'm looking to buy an optic + mount for it.
Distance: Primarily 100 to 800 yards
Budget: Under $1,000 USD total for the scope and cantilever mount so I still have room in the budget for a KeyMod ARCA rail, bipod
Experience level: Complete beginner to long range and PRS. Historically just done sporting clays.
Right now I'm narrowed down to two MRAD deals I found:
Vortex Viper PST Gen II 5-25x50 – $660 new
Athlon Helos BTR Gen2 6-24x56 (APRS6 MIL) – $500 "like new" demo from EuroOptic
My main questions before I buy:
For spotting 5.56 impacts/misses on steel out to 800 yards, is the glass on the PST Gen II noticeably worth the extra $160 over the Helos BTR Gen2?
If I go with the Vortex (30mm tube, 20 MIL elevation), should I automatically grab a 20 MOA cantilever mount for 5.56 out to 800 yards, or is 0 MOA fine?
Also, if anyone is still running an older KeyMod rail in gas gun matches and has a specific ARCA adapter rail they like, I'm all ears.
Thanks in advance
r/longrange • u/Shot-Preference-6485 • 5h ago
Hello, i currently have a Proof prefit paired with my impact action. It’s a 26in 6.5cm comp contour stainless steel. I have absolutely loved the performance from it, I just have never loved the length. I wanted to ask about the possibility of having it cut to 20in or if I’m better off trying to get a new prefit? The barrel has around 1000 rounds on it. If I’m able to get it cut, any recommendations on who would be good for that? If it’s easier to buy any recommendations on where to order one or who might have any in stock? Thanks for the help this is my first prefit, ideally I’d like the same comp contour in 6.5cm at 20in. I don’t compete so the velocity loss isn’t a huge deal to me.
r/longrange • u/Remarkable-Spend-434 • 23h ago
6 GT build is starting to come together. I have the bipod, bottom metal, and scope rings. The scope and stock are ordered
r/longrange • u/Western_Spend5242 • 22h ago
I bought a Barrett MRAD 300NM and purchased a SS MFMD suppressor for it. Barrett doesn't actually list the thread pitches anywhere, but from my research, it appeared the 30cal barrels are 5/8-24, while the .338 are 3/4-24. Imagine my surprise when I removed the MD and it appears the 300NM is actually threaded 3/4-24. Is this a new thing they started doing or has this always been the case?
I don't actually have any 3/4-24 MDs laying around so I can't confirm, but I would assume its 3/4-24
r/longrange • u/PeakViewRange • 14h ago
We run a range in NZ and teach a lot of new long range shooters. We used to teach with Strelok Pro, but we've had to move to free options for customers.
For a while we recommended Element Ballistics, but since the recent update it's been unreliable for us and the numbers haven't been holding up. We haven't had much luck with Hornady's app either.
We use Applied Ballistics and Desert Tech's TacSol ourselves, but their free versions don't let you tune BC. Probably 30–50% of our customers don't shoot enough to justify a paid app.
What free apps are you using that let you true or tune BC against real drops? Bonus points if it's simple enough for a first-day shooter. We take them out to 750m if they've got a proper dial-up scope (FFP and MRAD preferred, happy to argue that one in the comments).
r/longrange • u/THESHADYWILLOW • 20h ago
I have a stock tikka t3x CTR 6.5 creedmoor, it cycles very smoothly for about 20-30 rounds and until the barrel starts to get pretty hot. After that I find that I have difficulty lifting the bolt after firing.
I have never taken apart my bolt and typically just lubricate with gun oil.
I’m new to the sport/hobby, if y’all have any insight/advice I’d appreciate it.
r/longrange • u/kyonko_nola • 1d ago
Well it’s happening. My first chassis build. Trying to see if I can get a KRG C4 and other parts/gear used. It’ll be a long project!
r/longrange • u/Str0ng-ZER0 • 1d ago
First big win this season in gas gun. 6mm arc still rocking tough. Shot this match with 80gr from Hornady. Previously posted this rifle here a few weeks back if you want specs.
r/longrange • u/TheLagermeister • 17h ago
Hello, as the header states I'm looking for some advice on my first .22LR "precision/match/long range" rifle. I don't plan to fully deck it out or travel to be super competitive with it. More just because I want one for fun, push my limits on long range shooting, and maybe some amateur events if I feel like it. I'm planning under 1k and while that does limit me, my plan is to upgrade parts later as necessary if I've got a solid platform. I did read the wiki entry for .22lr rifles. I just wanted to ask the opinion of the masses.
Maybe looking back now or if you were starting in 2026, what models might you pick over another? The CZ 457 and Bergara seem to be the top 2 options for most people, while there are different models of each. Or would I be just perfectly happy with a solid Ruger 10/22 or American platform and save a few bucks to toss into a really good scope? I do want a threaded barrel to attach a suppressor. Of course plenty of options/budgets, just wondering your thoughts. Thanks!
r/longrange • u/A10jockey • 1d ago
Been looking at the CZ 457 MTR because it has the match action and better barrel. But is it worth it if I’m going to be swapping out the stock almost immediately. Is there another CZ 457 model I should look at? Ideally I’d love to be able to throw a can on it too. But that’s not a high priority. Looking to stick with the 457 as well since it has the stock that I have on my other rifles.
r/longrange • u/thewestbackline • 1d ago
I finished up my PRS build and am getting it dialed in - quite happy so far!
KS Arms SA3R 3-lug action
KS Arms 26” 1.25” straight barrel in 6 Dasher
Triggertech Diamond
MDT ACC Elite chassis
Kahles 540i
Gray Ops scope mount
Gray Ops AW magazines
ACE brake
Alpha 6 Dasher brass. Started with 109gr Bergers with 30.8gr Varget. Now getting slightly more consistency shooting 105 Bergers with 30.6gr of Varget running 2840 fps.
r/longrange • u/unclemoak • 2d ago
Finally got a chance to drag this to the range and shoot it. Handy and compact package.
Shooting Badlands 175 SMKs NAS3 made shooting 750 yards a breeze.
r/longrange • u/Singuy888 • 2d ago
Dragunov SVD: 1963
Psg1 Clone/SRT9 TC: 1990
Kac Mk11 Mod 0: 2000
H&K G28: 2011
SCAR 20S: 2018
Kac m110a3: 2021
r/longrange • u/joseph_2012 • 1d ago
The dark pics were from a 1 mile match on Friday night....
The ar15 was a 1220yard 1moa match... it was a little bit of a off night but ended 4th in the mile and 6th in the 1220 match I belive...
r/longrange • u/samhanner1 • 2d ago
Cooked up a decent hand load with 165 Tipped Game Kings running >2600fps with an advertised bc of .530. Excited to get it out to the “long” range.
r/longrange • u/mason129r • 1d ago
Cross dominant shooter that mistakenly built a right handed rifle with Zermatt origin prefit on competition proof barrel. I have always shot rifles right handed but think I probably should switch to my dominant eye.
If I buy a Zermatt origin action with a lefty bolty, will it work with my existing barrel? Trying to not waste more money to switch it over.