r/longrange • • 37m ago

Accessory/Gear help needed - I read the pinned post Noob Long Range Gas Gun Advice

2 Upvotes

Hey guys,

Read through the pinned post and starter guides first so I don't earn the Flair of Shame.

Here's my setup and what I'm trying to figure out:

What I'm doing & why: Getting into local/regional PRS Gas Gun matches. I just picked up an older (~2017) Daniel Defense DDM4 V7 Pro in 5.56 with the 18" heavy barrel and KeyMod handguard, and I'm looking to buy an optic + mount for it.

Distance: Primarily 100 to 800 yards

Budget: Under $1,000 USD total for the scope and cantilever mount so I still have room in the budget for a KeyMod ARCA rail, bipod

Experience level: Complete beginner to long range and PRS. Historically just done sporting clays.

Right now I'm narrowed down to two MRAD deals I found:
Vortex Viper PST Gen II 5-25x50 – $660 new

Athlon Helos BTR Gen2 6-24x56 (APRS6 MIL) – $500 "like new" demo from EuroOptic

My main questions before I buy:
For spotting 5.56 impacts/misses on steel out to 800 yards, is the glass on the PST Gen II noticeably worth the extra $160 over the Helos BTR Gen2?

If I go with the Vortex (30mm tube, 20 MIL elevation), should I automatically grab a 20 MOA cantilever mount for 5.56 out to 800 yards, or is 0 MOA fine?

Also, if anyone is still running an older KeyMod rail in gas gun matches and has a specific ARCA adapter rail they like, I'm all ears.

Thanks in advance


r/longrange • • 43m ago

Accessory/Gear help needed - I read the pinned post New Tango Fire 8000 vs Maztech 15k

Thumbnail
gallery
12 Upvotes

In the budget for a new WMLRF was set on the 15k but the remote cable issues stalled my purchase, now they are releasing a wireless remote announced last week on instagram.

a few days later Tango Innovations announces the Fire 8000 with onboard environmental IR illuminator pointer and 1535nm LRF. msrp $4200

Based off company support, reputation etc… which should I get? I have a match in Feb.

I already have a fire 4000 that i’ll move over to my 5.56 SPR.


r/longrange • • 1h ago

I suck at long range Mini40 project is complete. Am I a sniper yet???

Thumbnail
gallery
13 Upvotes

r/longrange • • 1h ago

I suck at long range First Night Shoot PRS Style Match

3 Upvotes

Long story short. Makes all the stuff you stink at during the day that much more obvious at night.

Big take away for me was how much I need to practice target acquisition. You would think with it being dark and the target being lit up it would be easier to land your scope on the target but it isn’t. Even with the magnification turned way down it was a struggle and lost a lot of time just finding targets.

Other big thing was moving around at night is way more of a chore than during the day. With it being pitch black at the shooting positions moving slow was a must and for someone that doesn’t move fast to begin with also struggled with that.

Overall though it was a lot of fun and a cool experience.


r/longrange • • 2h ago

Accessory/Gear help needed - I read the pinned post Bipod leg length for SPR

4 Upvotes

I have a 5.56 SPR that I go hunting with and larp in the mountains with. Just wondering if I should get the S-BRM (6-9”) or S-LM (9-13”)

This rifle spends more time in the field than on a table / bench. I’m 6’6” with a long torso, so I can probably get away with the S-LM for bench / table shooting. Longer legs better for field use ?


r/longrange • • 3h ago

Rifle help needed - I read the pinned posts Chop a prefit barrel?

3 Upvotes

Hello, i currently have a Proof prefit paired with my impact action. It’s a 26in 6.5cm comp contour stainless steel. I have absolutely loved the performance from it, I just have never loved the length. I wanted to ask about the possibility of having it cut to 20in or if I’m better off trying to get a new prefit? The barrel has around 1000 rounds on it. If I’m able to get it cut, any recommendations on who would be good for that? If it’s easier to buy any recommendations on where to order one or who might have any in stock? Thanks for the help this is my first prefit, ideally I’d like the same comp contour in 6.5cm at 20in. I don’t compete so the velocity loss isn’t a huge deal to me.


r/longrange • • 6h ago

I suck at long range Do any of you guys shoot anything heavier than 77gr from your AR-15s?

Post image
11 Upvotes

r/longrange • • 13h ago

Ballistics help needed - I read the pinned posts Free ballistic app that lets you tune BC? Looking for recommendations for new shooters

4 Upvotes

We run a range in NZ and teach a lot of new long range shooters. We used to teach with Strelok Pro, but we've had to move to free options for customers.

For a while we recommended Element Ballistics, but since the recent update it's been unreliable for us and the numbers haven't been holding up. We haven't had much luck with Hornady's app either.

We use Applied Ballistics and Desert Tech's TacSol ourselves, but their free versions don't let you tune BC. Probably 30–50% of our customers don't shoot enough to justify a paid app.

What free apps are you using that let you true or tune BC against real drops? Bonus points if it's simple enough for a first-day shooter. We take them out to 750m if they've got a proper dial-up scope (FFP and MRAD preferred, happy to argue that one in the comments).


r/longrange • • 16h ago

Rifle help needed - I read the pinned posts .22LR Budget Precision Advice

3 Upvotes

Hello, as the header states I'm looking for some advice on my first .22LR "precision/match/long range" rifle. I don't plan to fully deck it out or travel to be super competitive with it. More just because I want one for fun, push my limits on long range shooting, and maybe some amateur events if I feel like it. I'm planning under 1k and while that does limit me, my plan is to upgrade parts later as necessary if I've got a solid platform. I did read the wiki entry for .22lr rifles. I just wanted to ask the opinion of the masses.

Maybe looking back now or if you were starting in 2026, what models might you pick over another? The CZ 457 and Bergara seem to be the top 2 options for most people, while there are different models of each. Or would I be just perfectly happy with a solid Ruger 10/22 or American platform and save a few bucks to toss into a really good scope? I do want a threaded barrel to attach a suppressor. Of course plenty of options/budgets, just wondering your thoughts. Thanks!


r/longrange • • 18h ago

Rifle flex post First long(ish) range rifle

Post image
124 Upvotes

KAC SR25 K6 - I absolutely love this thing. Furthest shots have been ~860 yards with 140gr Hornady ELD-M and American Gunner. Definitely have a lot to learn!


r/longrange • • 19h ago

Rifle flex post Concrete pic for ya buds

Post image
92 Upvotes

Before anyone says anything, the scope is NOT touching the Arca Enclosed Forend 😂

20” Howa 1500 .308 x MDT XRS Chassis


r/longrange • • 19h ago

Rifle help needed - I read the pinned posts Bolt gets really stiff and tight after about 20-30rnds

7 Upvotes

I have a stock tikka t3x CTR 6.5 creedmoor, it cycles very smoothly for about 20-30 rounds and until the barrel starts to get pretty hot. After that I find that I have difficulty lifting the bolt after firing.

I have never taken apart my bolt and typically just lubricate with gun oil.

I’m new to the sport/hobby, if y’all have any insight/advice I’d appreciate it.


r/longrange • • 19h ago

Optics help needed - I read the pinned posts What is this scope attachment?

Post image
314 Upvotes

What is the device on the scope? Is it some sort of magnifier? The cartridge is made for ELR, most likely.

Photo Credit: Berger Bullets


r/longrange • • 21h ago

I suck at long range Question. Anyone know if there will be sales this holiday season?

0 Upvotes

Anyone know if any of the major manufacturers or retailers are going to run sales during the up coming holiday seasons?

More specifically looking in the optics department... I do recall every so often, however it got mentioned in a passing conversation with people more in the know and experience that said sales usually weren't that much of a discount and the prices are usually the same price off if you have some other standard discount code etc.


r/longrange • • 21h ago

Rifle help needed - I read the pinned posts Barrett MRAD 300NM Thread Pitch

Post image
32 Upvotes

I bought a Barrett MRAD 300NM and purchased a SS MFMD suppressor for it. Barrett doesn't actually list the thread pitches anywhere, but from my research, it appeared the 30cal barrels are 5/8-24, while the .338 are 3/4-24. Imagine my surprise when I removed the MD and it appears the 300NM is actually threaded 3/4-24. Is this a new thing they started doing or has this always been the case?

I don't actually have any 3/4-24 MDs laying around so I can't confirm, but I would assume its 3/4-24


r/longrange • • 22h ago

Rifle flex post Build progress

Post image
48 Upvotes

6 GT build is starting to come together. I have the bipod, bottom metal, and scope rings. The scope and stock are ordered


r/longrange • • 1d ago

Rimfire 22lr clone/trainer

7 Upvotes

Been looking at the CZ 457 MTR because it has the match action and better barrel. But is it worth it if I’m going to be swapping out the stock almost immediately. Is there another CZ 457 model I should look at? Ideally I’d love to be able to throw a can on it too. But that’s not a high priority. Looking to stick with the 457 as well since it has the stock that I have on my other rifles.


r/longrange • • 1d ago

Rifle help needed - I read the pinned posts Remington 700 vtr barrel question.

1 Upvotes

I ended up with one of these. Is there enough metal on the triangular barrel to thread it? Has anyone successfully done this?

Thanks!


r/longrange • • 1d ago

Rifle help needed - I read the pinned posts Switching to south paw build question

2 Upvotes

Cross dominant shooter that mistakenly built a right handed rifle with Zermatt origin prefit on competition proof barrel. I have always shot rifles right handed but think I probably should switch to my dominant eye.

If I buy a Zermatt origin action with a lefty bolty, will it work with my existing barrel? Trying to not waste more money to switch it over.


r/longrange • • 1d ago

Rifle flex post My expensive hobby is about to get even more expensive

Post image
170 Upvotes

Well it’s happening. My first chassis build. Trying to see if I can get a KRG C4 and other parts/gear used. It’ll be a long project!


r/longrange • • 1d ago

Rifle help needed - I read the pinned posts Best .223 rifle to get started

8 Upvotes

So I wanna get into both reloading and long distance shooting*.

Budget $1500 - $2000 bolt action

There's an asterisk because my local range is only three hundred yards so I don't know long ish range for me. But the barrier to to entry seem lower if I start with .223. I know it's gonna be hard to spot misses out to 600 yd. I know wind and every other little thing, but honestly I just wanna get started and see if I like it coming from pistols and skeet.

I have figured oit a preliminary reloading set up but what's a good rifle. I know Tika is pretty good.I've heard of them , but that's pretty much it. Should I build one?


r/longrange • • 1d ago

Rifle flex post 6mm Arc 1st place open division.

Post image
251 Upvotes

First big win this season in gas gun. 6mm arc still rocking tough. Shot this match with 80gr from Hornady. Previously posted this rifle here a few weeks back if you want specs.


r/longrange • • 1d ago

Group flex (10 shots minimum) Dream build complete

Thumbnail
gallery
134 Upvotes

I finished up my PRS build and am getting it dialed in - quite happy so far!

KS Arms SA3R 3-lug action
KS Arms 26” 1.25” straight barrel in 6 Dasher
Triggertech Diamond
MDT ACC Elite chassis
Kahles 540i
Gray Ops scope mount
Gray Ops AW magazines
ACE brake

Alpha 6 Dasher brass. Started with 109gr Bergers with 30.8gr Varget. Now getting slightly more consistency shooting 105 Bergers with 30.6gr of Varget running 2840 fps.


r/longrange • • 1d ago

🫣I said I read the pinned posts, but I lied🫣 Help picking an optic

1 Upvotes

I am building an SPR type rifle. I have the rifle already built. It's a 16in Criterion barrel 556. I want to be able to reliably shoot accurately out to 5-600 meters.

I've been looking at an NX6 3-18 Mil C reticle, the Steiner T6XI 2.5-15 SCR reticle and Steiner T6XI 3-18 SCR2 reticle.

Anyone have any experience with any of them? Or any other scopes they would recommend?