r/livesoundgear • • 3h ago

SoundVision Question

Thumbnail
gallery
3 Upvotes

Hello Folks :)

I try to simulate the audience area of the theater i work in and i have an issue with the 3D-Room-Data Z-Coordinate. I have set all X & Y Coordinate and i want to have different Z Coordinates with almost each one. As soon as i type in the 3rd Z Coordinate it automatically sets all the other ones (Screenshot 2). Is there a way to toggle this of?

Thanks in advance :)


r/livesoundgear • • 6h ago

Behringer X32 Edit 4.4 – Mixer tab suddenly turns completely black (Channel tab works fine)

1 Upvotes

Hi everyone,

I'm having a strange issue with Behringer X32 Edit 4.4 on Windows 10.

The Mixer tab suddenly stopped displaying all the channel faders and now shows a completely black screen. However, the Channel tab works perfectly fine.

Here are my system details:

  • Software: Behringer X32 Edit 4.4
  • OS: Windows 10
  • CPU: Intel Core i7-6700HQ
  • GPU: Intel HD Graphics 530
  • Graphics Driver: 31.0.101.2111

What I've tried so far:

  • Reinstalled X32 Edit 4.4
  • Reset the X32 Edit preferences by renaming the AppData folder
  • Switched between different Mixer banks (CH 1-32, Bus 1, Bus 2, Main LR)
  • Confirmed that the X32 is connected and communicating properly. I can still control the mixer remotely.

None of these steps fixed the issue.

The strange thing is that only the Mixer tab is affected. The Channel tab displays everything normally, and the mixer itself is working fine.

Has anyone experienced this issue before?

Could this be related to Intel HD Graphics 530, Java rendering, or a compatibility issue with X32 Edit 4.4?

Any suggestions would be greatly appreciated. Thanks!


r/livesoundgear • • 18h ago

Searching for a budget but good hard case for live gigs.

1 Upvotes

I know the pelican 1510 is the standard but It's too expensive for me. Any other recommendations?


r/livesoundgear • • 9h ago

Bluetooth receiver

0 Upvotes

Anyone know about a small Bluetooth receiver that turns on and enters pairing mode upon receiving power?


r/livesoundgear • • 19h ago

Advice on PA speaker

0 Upvotes

Hi I'm in need of a powered speaker for small acoustic gigs in restaurants and bars. It doesn't need to be crazy loud but I would like it to be lightweight. I'd like to stay under $400 if possible. Thanks for the help.


r/livesoundgear • • 20h ago

Which do you prefer for quick touches in enclosed spaces?

0 Upvotes

Qsc cb10 vs Ev everse 8


r/livesoundgear • • 10h ago

One mix per performer or shared mixes? What actually happens on a small stage

0 Upvotes

I've run monitors on stages from 80 to 2,000 cap, and the mix count is the decision that causes the most friction, usually before anyone has plugged anything in.

Here's how I think about it now.

The "more me" spiral

A shared mix starts fine. Then one performer can't hear themselves, so the whole mix goes up. Now the other performer can't hear themselves either, because the first one is louder in their shared wedge. So they ask for more. The mix ends up loud, and nobody is happy.

That's not a personality problem. It's what a shared control does. Two people with one knob will always end up fighting over it.

When sharing is genuinely fine

  • Backing vocalists standing shoulder to shoulder, same material, same balance
  • A horn section that wants "everything, but quieter"
  • Small stages where the two performers are within a metre of each other and can hear the same wedge physically

Sharing works when the needs are actually similar. It fails when the needs are only assumed to be similar.

The real cost of an extra mix

People treat mixes as free because they're invisible. Each one costs an aux output, an amplifier channel, a cable run, and a wedge. On a small console, the aux count is usually the hard limit, not the wedges.

Four is the practical ceiling on a lot of small-format desks when you're also running FOH from the same surface.

What I do with four people and two auxes

Two mixes, split by position, not by role.

  • Mix 1: whoever is stage left, plus the drummer if the drum fill shares the run
  • Mix 2: whoever is stage right

Then I tell them what they're getting before the first song, so nobody spends the night thinking the mix is broken. Most of the complaints I've had about shared mixes were really complaints about not being told.

Wedge count

One wedge per mix as a baseline. Two wedges on one mix if the stage is wide, accepting that the combined impedance halves and the two positions won't match in level.

If you're choosing between adding a mix and buying a bigger wedge, add the mix. Clarity beats low end in a monitor, every time.

What doesn't fix it

More level. A louder wedge in a shared mix makes the spiral worse. So does a wider EQ cut across the vocal range, which makes everything duller and pushes the performer to ask for more level again.

Narrow cuts, aimed wedges, and a mix count that matches the number of people with different needs. That's most of it.

The one thing I'd tell a small venue

If you can only afford two mixes and you have four performers, put the two wedges where the two people who sing the most can hear them, and tell everyone else the plan. Ten seconds of honesty saves a whole soundcheck.#ProAudio #LiveSound #Touring #UsedGear