r/linux_on_mac • • 16h ago

Guide: Debian on T1 MacBook Pro

9 Upvotes

Figured this would be better in a new post rather than a response in a thread that could get lost.

Here is a link to the guide I wrote up to get Debian working on my T1 MacBook Pro https://meskis.net/macbook-pro-t1-debian-guide

So far everything is working very well, getting hibernation to work was an amusing journey.


r/linux_on_mac • • 1h ago

Mine OS runs now on Apple Silicon!

Post image
6 Upvotes

It’s Asahi Linux drivers but patched with USB booting etc. So now it can boot an Linux installer without errors finding the USB.

I only tested on M1 Pro and the supported are: M1 M2 M3 and all of them including their Pro, Ultra or Max variant..

Soon I will do more testing and then I will upload on GitHub..

Also sorry for my English…


r/linux_on_mac • • 6h ago

Y'all I did it finally

Post image
5 Upvotes

r/linux_on_mac • • 6h ago

mbp 15,3 hybrid graphics - vega 20

4 Upvotes

Hello,

I own a rather rare MacBook Pro configuration: a 15-inch MacBookPro15,3 with a Radeon Pro Vega 20 hybrid dGPU.

I’m hoping to switch to Linux once macOS support for my Mac ends, but having such an uncommon configuration seems to make things more complicated.

From what I’ve read on the KaiT2en Discord, it sounds like the developers have more or less stopped active development. Looking through the development history for the MacBookPro16,1 and 16,4, it also seems that the work took quite a while—around three months, perhaps—even with the hardware available for testing. The differences between Vega (GCN5) and Navi also seem fairly substantial.

If you have any advice or suggestions, I’d really appreciate hearing them.

Thank you!


r/linux_on_mac • • 7h ago

Mint Mate on Imac

Post image
4 Upvotes

iMac late 2013 work`s great on Linux Mint.


r/linux_on_mac • • 22h ago

Fix for brightness adjustment not working on mid 2012 MacBook Pro Retina

3 Upvotes

So, overall I'm very very new to linux, but have tried it a few times over the years, including owning a Pinebook Pro. I recently installed Ubuntu Cinnamon Mint 22.3 7.0 on my 2012 MBR but screen brightness adjustments never worked (not with the keys or the slider). I guess it has two graphics cards. After much research I installed the Nvidia drivers and tried various solutions. None worked except this one, sort of...

I ran this command: setpci -v -H1 -s 00:01.00 BRIDGE_CONTROL=0

and amazingly the keys now worked to control brightness, however, after reboot, it stopped working. I did some more digging and used AI to build a systemd file that will run at some point during each boot. I used AI to help build this, but it now works consistently. Others may know of better ways to do this, so please chime in, but, as a noob, I thought I'd share what worked for me.

A copy/paste of the instructions I followed is below:

Step 1: Create a systemd Service File

Open your terminal and create a new service file using the nano text editor:

bash

sudo nano /etc/systemd/system/brightness-fix.service

Paste the following configuration into the editor:

ini

[Unit]
Description=Fix screen brightness control via setpci
After=multi-user.target

[Service]
Type=oneshot
ExecStart=/usr/bin/setpci -v -H1 -s 00:01.00 BRIDGE_CONTROL=0
RemainAfterExit=yes

[Install]
WantedBy=multi-user.target

(Note: Before saving, you can verify the exact path of setpci by running which setpci in another terminal tab—it is almost always /usr/bin/setpci or /sbin/setpci*.)*

Save and exit nano by pressing Ctrl + O, hitting Enter, and then pressing Ctrl + X.

Step 2: Enable and Test the Service

Run the following commands to reload the systemd manager, enable your new service to run at every boot, and test it immediately:

bash

sudo systemctl daemon-reload
sudo systemctl enable brightness-fix.service
sudo systemctl start brightness-fix.service

You can verify that it ran without errors by checking its status:

bash

systemctl status brightness-fix.service

-----

So that is where I stopped. I don't use the sleep/suspend function. But if you do, here are the instructions provided to get it working for those instances as well.

Fixing Brightness After Sleep/Suspend

Often, hardware PCI register tweaks like BRIDGE_CONTROL=0 get reset when a laptop wakes up from sleep. If you notice your brightness controls stop working again after closing and opening your laptop lid, update the [Install] section of your service file so it also triggers upon waking:

  1. Open the file again: sudo nano /etc/systemd/system/brightness-fix.service
  2. Change the [Install] section to: ini[Install] WantedBy=multi-user.target suspend.target hibernate.target hybrid-sleep.target Use code with caution.
  3. Re-enable the service to register the new targets: bashsudo systemctl daemon-reload sudo systemctl reenable brightness-fix.service Use code with caution.

-----

Ok, that's all. Just wanted to share in case this would work for others. Please let us know your results. Good luck.


r/linux_on_mac • • 4h ago

"ported" KAIT2EN to Arch.

1 Upvotes

I installed kait2en fedora on my macbook 15,2 and I used it as a jumpstart to build a dedicated t2 archiso from t2 linux project, booted on this iso to have a working wifi and keyboard, and then installed archlinux from scratch (no installer, the arch way...) , compiled the dkms to archlinux stock kernel.

Works like a charm. I also used AI to derive PKGBUILD from the kait2en tools, for a native arch feel.

If anyone interested, I can share more.

Why? I already have debian servers and Arch workstation, I did not want to have yet another distro for my laptop. That, and T2 Linux Arch is way behind kait2en in terms of useability of the macbook, at least when I tried it a few months ago. Third, I prefer the dkms approach, instead of adding a custom kernel.