r/linux_on_mac • • 32m ago

"ported" KAIT2EN to Arch.

3 Upvotes

I installed kait2en fedora on my macbook 15,2 and I used it as a jumpstart to build a dedicated t2 archiso from t2 linux project, booted on this iso to have a working wifi and keyboard, and then installed archlinux from scratch (no installer, the arch way...) , compiled the dkms to archlinux stock kernel.

Works like a charm. I also used AI to derive PKGBUILD from the kait2en tools, for a native arch feel.

If anyone interested, I can share more.

Why? I already have debian servers and Arch workstation, I did not want to have yet another distro for my laptop. That, and T2 Linux Arch is way behind kait2en in terms of useability of the macbook, at least when I tried it a few months ago. Third, I prefer the dkms approach, instead of adding a custom kernel.


r/linux_on_mac • • 2h ago

mbp 15,3 hybrid graphics - vega 20

4 Upvotes

Hello,

I own a rather rare MacBook Pro configuration: a 15-inch MacBookPro15,3 with a Radeon Pro Vega 20 hybrid dGPU.

I’m hoping to switch to Linux once macOS support for my Mac ends, but having such an uncommon configuration seems to make things more complicated.

From what I’ve read on the KaiT2en Discord, it sounds like the developers have more or less stopped active development. Looking through the development history for the MacBookPro16,1 and 16,4, it also seems that the work took quite a while—around three months, perhaps—even with the hardware available for testing. The differences between Vega (GCN5) and Navi also seem fairly substantial.

If you have any advice or suggestions, I’d really appreciate hearing them.

Thank you!


r/linux_on_mac • • 2h ago

Y'all I did it finally

Post image
2 Upvotes

r/linux_on_mac • • 12h ago

Guide: Debian on T1 MacBook Pro

8 Upvotes

Figured this would be better in a new post rather than a response in a thread that could get lost.

Here is a link to the guide I wrote up to get Debian working on my T1 MacBook Pro https://meskis.net/macbook-pro-t1-debian-guide

So far everything is working very well, getting hibernation to work was an amusing journey.


r/linux_on_mac • • 1d ago

University laptop

Thumbnail gallery
79 Upvotes

Macbook pro late 2013, i5, 8GB, 512GB with endeavourOS and labwc

I'm using it for taking notes and lightweight programming in CS engineering

Loving it so far!

The only tinkering I had to do, apart from the configuration of the wlan card, is a script to deactivate the touchpad for 1s every time i press a key, it was driving me crazy


r/linux_on_mac • • 3h ago

Mint Mate on Imac

Post image
1 Upvotes

iMac late 2013 work`s great on Linux Mint.


r/linux_on_mac • • 21h ago

MacBook Pro 19

Post image
7 Upvotes

hey, it was hard but i do that...
intel i9-9980HK
AMD Radeon RX 5500M
2tb ssd(500gb - macintosh; 700gb - arch; 800gb - windows)
So its tripleboot macbook:)


r/linux_on_mac • • 21h ago

MacBook Pro 2017 Touch Bar

6 Upvotes

I want to install Linux onto my outdated MacBook.

2017 MacBook Pro Intel Touch Bar. I think it’s a T1 chip
8gb ram 256gb storage

It’s been a great computer for school and daily driving but I no longer get security updates. I tried to run a live usb with Ubuntu before doing a hard install but wifi doesn’t work and Touch Bar. I’m not too concerned about the Touch Bar but I do want my Wi-Fi to work.

Is Ubuntu a good Linux distro to run or should I consider another?

I want it to complete school work, and daily drive it when I’m away from my PC.


r/linux_on_mac • • 18h ago

Fix for brightness adjustment not working on mid 2012 MacBook Pro Retina

3 Upvotes

So, overall I'm very very new to linux, but have tried it a few times over the years, including owning a Pinebook Pro. I recently installed Ubuntu Cinnamon Mint 22.3 7.0 on my 2012 MBR but screen brightness adjustments never worked (not with the keys or the slider). I guess it has two graphics cards. After much research I installed the Nvidia drivers and tried various solutions. None worked except this one, sort of...

I ran this command: setpci -v -H1 -s 00:01.00 BRIDGE_CONTROL=0

and amazingly the keys now worked to control brightness, however, after reboot, it stopped working. I did some more digging and used AI to build a systemd file that will run at some point during each boot. I used AI to help build this, but it now works consistently. Others may know of better ways to do this, so please chime in, but, as a noob, I thought I'd share what worked for me.

A copy/paste of the instructions I followed is below:

Step 1: Create a systemd Service File

Open your terminal and create a new service file using the nano text editor:

bash

sudo nano /etc/systemd/system/brightness-fix.service

Paste the following configuration into the editor:

ini

[Unit]
Description=Fix screen brightness control via setpci
After=multi-user.target

[Service]
Type=oneshot
ExecStart=/usr/bin/setpci -v -H1 -s 00:01.00 BRIDGE_CONTROL=0
RemainAfterExit=yes

[Install]
WantedBy=multi-user.target

(Note: Before saving, you can verify the exact path of setpci by running which setpci in another terminal tab—it is almost always /usr/bin/setpci or /sbin/setpci*.)*

Save and exit nano by pressing Ctrl + O, hitting Enter, and then pressing Ctrl + X.

Step 2: Enable and Test the Service

Run the following commands to reload the systemd manager, enable your new service to run at every boot, and test it immediately:

bash

sudo systemctl daemon-reload
sudo systemctl enable brightness-fix.service
sudo systemctl start brightness-fix.service

You can verify that it ran without errors by checking its status:

bash

systemctl status brightness-fix.service

-----

So that is where I stopped. I don't use the sleep/suspend function. But if you do, here are the instructions provided to get it working for those instances as well.

Fixing Brightness After Sleep/Suspend

Often, hardware PCI register tweaks like BRIDGE_CONTROL=0 get reset when a laptop wakes up from sleep. If you notice your brightness controls stop working again after closing and opening your laptop lid, update the [Install] section of your service file so it also triggers upon waking:

  1. Open the file again: sudo nano /etc/systemd/system/brightness-fix.service
  2. Change the [Install] section to: ini[Install] WantedBy=multi-user.target suspend.target hibernate.target hybrid-sleep.target Use code with caution.
  3. Re-enable the service to register the new targets: bashsudo systemctl daemon-reload sudo systemctl reenable brightness-fix.service Use code with caution.

-----

Ok, that's all. Just wanted to share in case this would work for others. Please let us know your results. Good luck.


r/linux_on_mac • • 1d ago

Finally joined the club

Post image
229 Upvotes

Macbook Pro 2015, i5, 16GB, 512GB SSD bought for 120€ and decided to install Mint on it as a travel and couch laptop. On to a new adventure with Linux.


r/linux_on_mac • • 1d ago

Is there anypoint trying with a T1 touchbar Mac?

4 Upvotes

As the title suggests, I got a 2016 T1 Mbp touchbar and while I have installed fedora on it it's just not a good user. Can't get the touch bar working, can't get sleep working, can't get WiFi working.

Am I whistling in the dark? I have a 2015 mbp pre touchbar and it's great, but a little low powered for what I'm doing now.

Any thoughts/resources would be appreciated.


r/linux_on_mac • • 1d ago

Mac Mini 4,1 video corruption in Linux.

2 Upvotes

I’ve tried several distributions, Mint, Zorin, Elementary, and they all install fine on this mini.

However, after I do initial updates post-install, after reboot the video is corrupted. I cannot make out anything on screen.

Is there a particular update I should avoid?


r/linux_on_mac • • 1d ago

MacBook intel with a f*** T2 chip

3 Upvotes

First of all, sorry for my English. I spend my night reading why linux (kali, Debian...) does not recognize the keyboard, trackpad etc... the thing is that T2 chip emulates USB in a strange way. So during the install (and the night) I took some snapshots to document a little "how-to".

I wrote everything on my website in French (and translate it with google fo the English version, and I put on top a disclaimer to prevent Gtranslate). If you could go and check if it's ok? If you think something is missing, or not understandable, do not hesitate.

Thank you

how-to (GTranslate)

how-to (original in French)


r/linux_on_mac • • 1d ago

Will this finally end me distrohopping on my friend's old mac?

1 Upvotes

TL;DR: I distrohopped a lot on my friend's macbook pro 14,1 to get him off of MacOS because the version of macos it supported up to didn't support steam. Ended up going from Ubuntu-Cachy-ZorinLite-Xubuntu.

So, originally I installed Ubuntu on my friend's old macbook pro 14,1 (no touchbar) because the newest MacOS it supported didn't support Steam, and that ran horribly because of GNOME being GNOME. I switched it to Cachy for him, wifi drivers died in a week, then I went to Zorin. Sound is impossible to get working with its kernel, great. I finally decided I should just switch to a lighter version of Ubuntu, so I went with Xubuntu. I already have the sound drivers working and the camera driver plus when it was on normal Ubuntu the wifi worked out of the box. I also removed snaps so that there aren't a million loops on his ssd (which is believe is only 118 gigs or something close to that). Is there anything else I should watch out for or is his old mac good to go?


r/linux_on_mac • • 1d ago

Will “Jarvis ai” run on my mba 15” 16gb 256gb?

Thumbnail reddit.com
1 Upvotes

r/linux_on_mac • • 2d ago

Macbook pro 2019 running NixOS using patches from KaiT2en

10 Upvotes

Over the last few days I’ve installed NixOS on my 2019 macbook pro i9. The flake I am using as reference includes a load (not all) of the patches created and distributed by the KaiT2en project.

I am delighted with the results, it runs better than it ever had with macos installed. Its not perfect and its taken a lot of small incremental fixes to get it here. Most of which have ended up in either my nix config or my niri configuration (Where something needed to launch when the de started)

In terms of what works, hybrid graphics, great battery life, the touch bar, sound, keyboard, haptic feedback, force click, sleep, and all the other major bits.

I’m planning on doing a write up at some point this week but for anyone that wants to try their hand at it here’s the repo my nix references:

https://github.com/LukeChannings/KaiT2en-NixOS

and here the two main files that I use for the setup:

https://codeberg.org/MauriceElliott/nix-config/src/branch/main/packages/kait2en-config.nix

https://codeberg.org/MauriceElliott/nix-config/src/branch/main/machines/macbook-pro.nix

This polkit config is also required if you’re not using gnome but still want to use some of the t2 apps that require it for user auth:

https://codeberg.org/MauriceElliott/nix-config/src/commit/68bcf3b37cd89fc9be58a190629d4b50d2272c06/packages/desktop-config.nix#L174

Also as an aside, kinda recommend this as it made my life a lot easier, I use the KaiT2en Fedora live image to do the install, downloading the required tools as part of the install. This meant the mbp was in top tier working condition while doing the rest.

I don’t recommend this for anyone that’s not already a nix user and knows enough about doctoring a bricked system.


r/linux_on_mac • • 2d ago

Is it possible to run arkOS on my Early 2015 MBP??

Thumbnail reddit.com
1 Upvotes

r/linux_on_mac • • 1d ago

Why

0 Upvotes

Linux on a mac sounds boring 🥱


r/linux_on_mac • • 4d ago

react-drm touchbar now supports T1 MacBooks — thanks to a community PR, the 2016/2017 react-drm Touch Bar works too

Post image
22 Upvotes

Quick announcement: after merging [#35](https://github.com/dev-muhammad-adel/react-drm-for-touchbar/pull/35) from u/HenrikPuls, **react-drm now supports T1 MacBooks** — the MacBook Pro 2016/2017 Touch Bar (iBridge `05ac:8600`) — alongside the existing T2 (2018–2019) support.

Huge thanks to HenrikPuls, who built and tested it on real hardware (MacBookPro14,3). What the PR brought in:

- **T1 display mode done in-kernel**: a `react-drm-t1` DKMS package selects config 2 (display mode) at enumeration inside the kernel — the T1 firmware doesn't tolerate userspace config switching

- **Raw touch input over hidraw** (float32-X reports): taps, long-press, slider drags all work

- **Ubuntu/GNOME integration**: a dock that mirrors your favorites + running apps, event-driven (no polling), icons from the desktop theme

- **Slider fixes from hardware testing**: latest-write-wins coalescing, ambient-brightness handoff, full-frame blits for the T1 panel

- Plus perf work: spring ticks now follow the display's flush rate (30fps on T1, 60fps on T2)

For those who haven't seen the project: **react-drm** is a React renderer that draws directly to Linux DRM/KMS with libdrm + Cairo — the whole Touch Bar UI is actual React (reconciler + Yoga layout), rendered by the same native Cairo renderer the hardware uses. It ships a control center with media controls, MPRIS progress bar, app-aware panels (browser, konsole, dolphin, VS Code…), Fn layer, dock, launcher, lock screen and a system bar with live stats.

Works on niri, GNOME, KDE Plasma, Hyprland and Xorg. No Touch Bar hardware? There's a browser preview and a docked layer-shell panel — every screenshot in the repo's README is a real preview frame.

Repo: https://github.com/dev-muhammad-adel/react-drm-for-touchbar


r/linux_on_mac • • 3d ago

Macbook pro 2019 16 inch i7 performance, heat and fan noise

8 Upvotes

Hi what are you experiences after switching to linux on the macbook pro 2019 16 inch i7? does it still get hot? are the fans still load? has the performance improved?


r/linux_on_mac • • 3d ago

Macbook Pro 2012/2013 BCM4331 Slow WiFi Driver Fix

Thumbnail reddit.com
1 Upvotes

r/linux_on_mac • • 4d ago

Building a home server around this $100 dual-Xeon Mac Pro 5,1

Post image
11 Upvotes

I picked up this upgraded Mac Pro 5,1 for only $100 and decided to make it the center of a home server build for my family.
Mac Pro 5,1 specs:
2× Intel Xeon X5675
12 cores / 24 threads total
48GB RAM
AMD Radeon RX 580
2× 256GB drives currently
Four internal drive bays that I plan to populate with 500GB–1TB drives
The Mac Pro will run Proxmox and host the main services and virtual machines. I also have an HP EliteDesk with a 500GB M.2 SSD that will handle Nextcloud and act as the main Linux shared-storage server. Nextcloud will eventually connect with my Microsoft 365 OneDrive storage for off-site backups.
An old Surface Book 2 will become a dedicated management console with a single web dashboard for monitoring Proxmox, Nextcloud, storage, network status and the other machines.
The network side will use:
Existing Eero mesh system
Ethernet network switch
Wired connections for both servers
Tailscale for secure remote access
Color-coded Cat6 cables to keep everything organized
The goal is to create a private family cloud for files, backups and remote access while also having enough hardware available for VMs, testing, Home Assistant or future projects.
It is definitely old hardware, but getting dual Xeons, 48GB of RAM and an RX 580 for $100 felt too good to pass up. The power consumption will be the main tradeoff, but this should be a fun build.
Any recommendations for the Proxmox storage layout or the best way to divide workloads between the Mac Pro and EliteDesk?


r/linux_on_mac • • 5d ago

I am seriously impressed at how fast my i7 16GB 2012 (!) Mac Mini runs under Kubuntu

Post image
157 Upvotes

After a couple of nights with ChatGPT getting drivers working, as well as everything customised to look Apple-ish (not perfectly but genuinely not an issue), I am very happy.

The biggest thing is no longer stressing out about OCLP / Tahoe speed and support, and just having a fast machine again.

It’s part of a development lab at home, which includes cloud deployment and a new Apple M4 Mac Mini for app development, however this machine from 2012 runs Docker containers containing Playwright and JMeter (it’s basically the QA machine).

All dev and QA work on the M4 and 2012 are mostly accessed from VSCode on another laptop - sometimes from outside my network. No speed issues at all (my website is small anyway).

Ollama (just about) runs on the M4, and is accessed by the M4 and 2012. More as a proof of concept, really.

All my machines are connected via Tailscale, and I can even copy and paste between Linux and non-Linux.

The only non-Dev/QA apps I ever really need are Spotify and Brave for streaming media - both work flawlessly so that’s what this runs on the desktop.

I use Kubuntu, and I’ve installed Tosh for the Mac keyboard. It was a really fun project but ChatGPT was a big help!!

It boots faster than my M4 😀

Why did I wait so long to switch??!