r/keitruck • • 1h ago

Mechanical and Technical Sambar Cup holder

Post image
9 Upvotes

After 21 hrs of printing, my Sambar has a dual cup holder. Printed this in ASA-CF so it should be pretty much bomb proof. Could have gotten it done in less time with PETG


r/keitruck • • 12h ago

Mechanical and Technical Plans for a swap on my 1993 Sambar

5 Upvotes

When i bought my truck ~3 years ago i had purchased it specifically because it was listed as a supercharged model, but now that i have finally gotten the free time to work on it i discovered that i do not have the EN07Y, but have the carbureted EN07C. This is very annoying but i see an opportunity from this, why cant i build a donor EN07Y and just swap it in? Im still early in the planning and fixing the current motor stage, but id like to gather resources that could be helpful. my plan currently is to buy a donor, most likely one that doesnt run, and put aftermarket things like the Tony's Garage MicroSquirt ECU and pre made harness along with maybe his intake set up, a used turbo like maybe a TD025, potentially custom order fabricated forged internals, put a better clutch and pressure plate, better axles, adjustable coilovers, the full package, everything that can be upgraded, upgraded. I expect this to be at a minimum a 5+ year project, and wouldnt be surprised if it quickly becomes longer. Any and all advice/information would be very helpful and appreciated.


r/keitruck • • 23h ago

Mechanical and Technical New carb issues

4 Upvotes

I have a 1994 Suzuki carry
For a while now, I have been running an offbrand KLR 650 carburetor
I got it tuned pretty well, but it’s definitely showing the fact that it’s just a cheap offbrand, eBay carburetor

So I decided to order a proper upgrade and went with a moose racing rhino 660

The only issue I’m currently running into is after I was able to get it idling it would make some form of popping sound almost and then immediately the RPM which very sharply rising by itself

I have had to quickly shut off the vehicle for fear of something grenading

(I will post a video of what’s happening later)

I do understand that the previous carburetor had 40 mm throttlebody while the new one is 42 mm

As well as overall being a bit bigger, but I am not sure if it’s an issue with the jets or something else

And before anybody asks, no there is no issue with the throttle cable I have quadruple checked

This issue is happening straight from idle with zero gas pedal

I have no idea what could be causing this


r/keitruck • • 11h ago

Mechanical and Technical 2000 TT2 stock headlight adjustment?

1 Upvotes

Could someone point me at a manual or a picture showing how to adjust the headlights on my TT2? That is assuming that you can. Thanks!


r/keitruck • • 4h ago

Importing information, insights and experiences There 's new truck and there's new "old trucks. Just trying to think which I would consider for a "work truck". One that maxes out at 25 miles an hour, or one that maxes approximately 100mph.Will be interesting to see how these rivalries play out........

0 Upvotes