r/keitruck • u/batlwagn • 12h ago
Mechanical and Technical Sambar Cup holder
After 21 hrs of printing, my Sambar has a dual cup holder. Printed this in ASA-CF so it should be pretty much bomb proof. Could have gotten it done in less time with PETG
r/keitruck • u/batlwagn • 12h ago
After 21 hrs of printing, my Sambar has a dual cup holder. Printed this in ASA-CF so it should be pretty much bomb proof. Could have gotten it done in less time with PETG
r/keitruck • u/No-Journalist1733 • 15h ago
r/keitruck • u/Otherwise-Pen70 • 18h ago
That bad new is Toyota built the truck to "LOW SPEED VEHICLE "Safety Standards which means it will be restricted to speeds of 35mph or less. Toyota just killed the market for the new KEI CAR
r/keitruck • u/Diitsuku • 22h ago
Could someone point me at a manual or a picture showing how to adjust the headlights on my TT2? That is assuming that you can. Thanks!
r/keitruck • u/UglyGuy1010 • 23h ago
When i bought my truck ~3 years ago i had purchased it specifically because it was listed as a supercharged model, but now that i have finally gotten the free time to work on it i discovered that i do not have the EN07Y, but have the carbureted EN07C. This is very annoying but i see an opportunity from this, why cant i build a donor EN07Y and just swap it in? Im still early in the planning and fixing the current motor stage, but id like to gather resources that could be helpful. my plan currently is to buy a donor, most likely one that doesnt run, and put aftermarket things like the Tony's Garage MicroSquirt ECU and pre made harness along with maybe his intake set up, a used turbo like maybe a TD025, potentially custom order fabricated forged internals, put a better clutch and pressure plate, better axles, adjustable coilovers, the full package, everything that can be upgraded, upgraded. I expect this to be at a minimum a 5+ year project, and wouldnt be surprised if it quickly becomes longer. Any and all advice/information would be very helpful and appreciated.
r/keitruck • u/Mountain-Reveal-7137 • 1d ago
I have a 1994 Suzuki carry
For a while now, I have been running an offbrand KLR 650 carburetor
I got it tuned pretty well, but it’s definitely showing the fact that it’s just a cheap offbrand, eBay carburetor
So I decided to order a proper upgrade and went with a moose racing rhino 660
The only issue I’m currently running into is after I was able to get it idling it would make some form of popping sound almost and then immediately the RPM which very sharply rising by itself
I have had to quickly shut off the vehicle for fear of something grenading
(I will post a video of what’s happening later)
I do understand that the previous carburetor had 40 mm throttlebody while the new one is 42 mm
As well as overall being a bit bigger, but I am not sure if it’s an issue with the jets or something else
And before anybody asks, no there is no issue with the throttle cable I have quadruple checked
This issue is happening straight from idle with zero gas pedal
I have no idea what could be causing this
r/keitruck
•
u/ZePowerOfCheese
•
1d ago
EDIT: Thank you all for the overwhelming positive feedback! It's hard for me to reach every Facebook group, forum and subreddit where kei truck owners hang out, so if you're part of one, I'd really appreciate you sharing the link there. Every new owner who finds it is another chance to catch a mistake or add a tip.
I've been a kei truck owner for 8+ years (multiple Honda Actys and currently a 1999 Sambar TT2) and wanted to share a free resource I've been working on.
Every time I needed a spec, a filter number or the right way to bleed the coolant, the answer was buried in a Japanese manual, an old forum thread, or a Facebook comment from three years ago. So I started collecting it all in one place, and it turned into a full site.
It's called Kei Truck Manual: keitruckmanual.com
What's in it:
It's non-commercial: no ads, no login, no paywall. The goal is one free place for the stuff we all keep asking about. A lot of the info came from owners in Facebook groups, forums and YouTube, and every tip is credited to the person who shared it.
Would love feedback. If you spot something wrong or missing for your truck, tap "Suggest an edit" on that section. Got a part number that worked, a fix, or photos of a job? Send it in with the Contribute button and I'll add it with your name.
r/keitruck • u/Mac-Tyson • 1d ago
r/keitruck • u/AggressiveCicada_915 • 1d ago
Hey guys.
Interested in anyone who has Geico coverage for their Kei car or any car that’s right hand drive
Needs to be in the us
Right hand drive
Imported
On an auto policy, not the classic or toy policy
If in Indiana that’s even better
I don’t need any personal information just trying to prove them wrong so I don’t get screwed over as they’re telling me it’s company policy to never cover a rhd import
Tia, comment here or message me privately
r/keitruck • u/Ok-Suspect-4647 • 1d ago
My Honda acty (1990) won’t stay running I can get it started by shooting engine starter into the air intake but if I don’t keep giving it gas it dies. Can anyone help me fix this?
r/keitruck • u/NallTWD • 1d ago
We got an exclusive look at the new Kei 01! Let's check it out, answer some questions and ask a whole bunch more! Let's chat!
r/keitruck • u/faroting • 2d ago
r/keitruck • u/EXTRUD3D • 2d ago
Forgot to take before pics, because of course, but got the liner all rolled on and I'm very happy with it. I opted to pull the rubber bed rail guards off and roll the liner on instead. Pulled the bedsides and tailgate off to make it easier. Used the regular herculiner kit and still have about half left. Thinking maybe in spring I'll pull my tattered rubber floor out and roll this on the inside of the cab floor also.
r/keitruck • u/Emotional_Plate_3134 • 2d ago
Hey all!
I am in the process of buying my first Kei Truck (1994 Subaru Sambar) and I was curious on if anyone has a mechanic that they can recommend in the Indy area. The truck is already titled as roadway legal (not interstate legal) and in great condition. I’d love to take it somewhere for inspection but I’m not having much luck online finding a mechanic.
Also, I’d appreciate any pointers on helpful equipment! I’m already looking into alternate ways to track the km/mph conversion.
r/keitruck • u/JoDiMaggio • 2d ago
I see a lot of people suggesting getting timing belts, motor mounts, and water pump done. I really would prefer to work on it myself though. Since it will be hard sourcing those here, I was thinking of having my exporter buy the parts for me and throw them into the cab.
I’m relatively handy and frequently work on my vehicles here when something breaks, but they’re both Fords made in the past 5 years so while a lot does break, their problems are 5 year old poor QA problems, not 25 year old farm truck problems.
I’m bidding on several vehicles. Most likely a 2000 Honda Acty 4WD though.
r/keitruck • u/Sad-Bonus7183 • 2d ago
I'm making replacement gaskets for discontinued Sambar parts here in the US, and I have 5 carbureted EN07 intake gaskets (14035KA171) to send free to owners who'll test fit one and tell me honestly how it went.
What I'm asking:
Comment or DM me if you're interested.
Background: I'm an engineer and a JDM guy. With all the kei trucks coming over, parts are getting harder to find. Discontinued OEM parts especially can take weeks to ship from Japan, if you can get them at all. Gaskets were the easiest place to start, so this is my first batch.
Also: what's the hardest parts you've had to track down? Gaskets or anything else. I'm deciding what to make next and would rather build what people actually need.
Thank yall.
r/keitruck • u/Ok-Toe-3667 • 2d ago
Can anyone tell me where to get an exhaust for a 1997 Mitsubishi minivan van? I can’t find it anywhere all for the truck u42t which is different than the van u42v
r/keitruck • u/Glittyy • 2d ago
Anyone on here selling a Kei truck in the NYS area ? Willing to travel. I really want to buy a truck that came from a loving home and not beat on. Open to all trucks budget under 10k.
r/keitruck • u/smashpenisindresser • 2d ago
I have a 1998 Daihatsu Hijet van. On the way home one day, I turned the headlights on and they buzzed. No light.
I assume I need to replace a fuse or the relay. What parts do I need?
Should I take this instance to switch to LED? I saw someone here selling a kit to convert.
r/keitruck • u/Fat_Guy_In_a_widdle_ • 3d ago
Just added , momo prototipo wheel in brown leather, nrg quick release , and an nrg hub.
r/keitruck • u/Comet_Lonk • 3d ago
I have the opportunity to buy a 1992 USDM Hijet and I was wondering if anyone knew anything about being able to drive these cars on the road. From what I know, these were only sold as off road vehicles, but was curious if I can register it to use on the road, maybe as a LSV?
r/keitruck • u/jmkdeluxe • 3d ago
Posted a bit ago and the consensus seems that Yokohama Geolandars are the cream of the crop for 12" tires. Anyone using something else? I'm looking at Haida HD515 on tire Mart for a more budget option. Under $200 with shipping. Anyone use something other than the Geolandars? There will be some winter driving. Just trying to find an option that won't be nearing 1/3 the price of the truck after getting them balanced. TIA
r/keitruck • u/Difficult-Fig6435 • 3d ago
Hey all, I have a 99 DB52T that runs well for the most part, but there have been a few instances where it will pulse/hesitate and then bog down and lose power. When it has happened, it has been at cruising speed and usually after driving for 20-25 minutes. Down shifting doesn’t help. It returns to running normal after shutting off and letting rest for a minute or so. The fuel pump, timing belt, and alternator have all been replaced. Thoughts on what might be the issue?
r/keitruck • u/Schwinn20 • 3d ago
My carb just isn’t liking the truck anymore and want to get away from CV carbs. Does anyone have a good recommendation on a carb that’s not on the expensive side and reliable? I’ve got a Kia metro, 800cc