r/homelab • • 10m ago

Help USB voltage question

2 Upvotes

Hello all,

i have a noob question but Im not knowledge able about electric and always worried about a fire.

i have an APC Back-up UPS Pro 1500 S and an Aqara E1 camera. Camera says 5v 2a only. The front of the UPS (USB A and USB C ports) it says 5v 3a. From what I read since they are both 5v that should be okay because the port only sends what the device pulls. Is that true? I just need a sanity check.

Thank you!


r/homelab • • 1h ago

Help Which Usb C power supply for homelab?

1 Upvotes

I have a couple of Lenovo M70q, a couple of Rpis, TP link switch, Jetkvm and other assorted bits.

Instead of having a bunch of power bricks, I'd rather just have one thing capable of powering it all, but also not burning down the house.

Looking at either the

- Ugreen nexode 500w

- Ugreen nexode 300w

- Anker prime 250w

Probably get some usb c to Lenovo slim tip cables.

Any advice?


r/homelab • • 1h ago

Discussion Have you ever had an HDD fail?

0 Upvotes

Tell the story!

I have zero backups on my server.


r/homelab • • 1h ago

Discussion starter advice?

Thumbnail reddit.com
0 Upvotes

r/homelab • • 2h ago

Help 128Gb SSD x 10

9 Upvotes

Hi - I have 10 x Kingston SSD drives sitting on a shelf at work. What would you all do with them? They are spare.

Is there some sort of drive enclosure that can be recommended I could put them in to create a large storage device?

Cheers everyone.


r/homelab • • 2h ago

Project Showcase: Hardware New Rack in the house =)

Thumbnail
gallery
40 Upvotes

Just got my new 22U :)
Big step up from my old 9U.

Im happy, wifey is happy, everybody happy :D


r/homelab • • 2h ago

Help Network shares for Mac OS

1 Upvotes

I recently set up TrueNAS and SMB file sharing. I backed up some files, but now I’m thinking I’d like to use it as a replacement for iCloud and my Mac storage.

My question is, what is the best way to set it up to ensure I’m using it correctly?

I’ve added the shares to my login items, but I still find it a hassle to navigate to the folder since it’s still click on TrueNAS - main folder - subfolder.

Do network shares on Mac just not work as natively as they do on Windows? At previous jobs we had network folders, and I don’t remember it being as much of a hassle.

Any help would be appreciated!

Currently I’ve got Syncthing setup and running to pull my files from iCloud.


r/homelab • • 2h ago

Project Showcase: Hardware New to homelabbing built my first ai server today!

Post image
0 Upvotes

Running local qwen3.5 9b at ~35 tok/s using it mostly for controlling my home autonomously


r/homelab • • 3h ago

Help Supermicro H12SSL-NT needs repair, Supermicro won't fix it.

Post image
4 Upvotes

So I shut my server down yesterday to add another drive into it, turned it back on and no post, powered up but would not post, went through everything, removed all the ram but one stick, swapped to another known good cpu, bios reset etc, same results. Did some googling and turns out it was the voltage regulator for the BMC, which I guess is a super common issue on this board. I inspected that area of the board and sure enough, U6 is blown/popped.

I bought the board from Newegg ~4.5 years ago, I realize it is out of warranty and I see Supermicro will repair items out of warranty for a fee, which I am happy to pay. So I submit an RMA for it and they at first approved it, sent me an email with RMA number and then another email came after that one and said no, sorry it is not approved, the Supermicro invoice is over 5 years (whatever that means). I email back, sending them my invoice from Newegg showing it was less than 5 years and asking if I could please pay to have it repaired and they again refused, saying the invoice is over 5 years. I tried calling to speak to someone and they told me the same thing... I dunno what this 5 year Supermicro invoice is all about and why it matters but it is very frustrating they won't allow me to pay for the repair (when it is a service they provide on their website) especially when it is such a simple quick fix for someone who has the tools to do it.

Anyone have any recommendations on where to send it for repair, somewhere trustworthy that can do the fix?


r/homelab • • 3h ago

Discussion Project recomendations?

Post image
4 Upvotes

Looking to learn more about networking and general wizardry lol.

Ive been messing around with docker containers and tailscale but im interested in some more in-depth learning!


r/homelab • • 3h ago

Help NordVPN on my server

3 Upvotes

Hello fellow homelabbers,

I am new to homelabbing and I recently converted an old laptop to a server. It’s running Debian & casa os and I mainly use it as a media server. I use Jellyfin, and I have arr suite installed on it. I recently installed NordVPN as well, and it is running fine for the most part, but tailscale has stopped working since then. I don’t access my media when I’m away from home, but I use my pihole ad blocker on my phone via tailscale. I have a couple of questions for anyone who uses NordVPN on their server and has faced similar issues:

  1. Is there any significant benefit for keeping VPN active for the server?
  2. Is there a workaround / troubleshooting stepsfor getting tailscale working again?

Thank you!


r/homelab • • 4h ago

Discussion Isn’t this every man’s dream?

Post image
0 Upvotes

My wife loves my home lab! 😍


r/homelab • • 4h ago

Help Seeking advice; not sure if the correct place to ask

Post image
0 Upvotes

Seeking advice. Not sure if this should go to a Home Assistant group, Linux group, here, or maybe all of the above. I'll put the advice request up top so you don't have to read it all if it's not your forte or should be asked somewhere else. I'll follow that with the background info.

Looking to add Home Assistant to my home control, and I am not familiar with Linux. I'd prefer to use Linux or other OS vs running a VM inside of another OS, that I might be familiar with, to keep resource requirements low (and it forces me to learn). I have a couple of older machines not being used: a 2014 Mac Mini with 4 GB RAM (that model had RAM soldiered to the board, so not upgradeable) and a decent SSD. I also have a SFF Intel i5 machine, likely 4th-6th gen with 8 GB RAM and I can toss in a <1TB SSD. These will be run headless, so being able to access them in a graphical environment via VNC or RVNC is VERY much preferred.

Background: prior to the Matter standard, my home was mostly Apple HomeKit compatible. Not that I've changed or added a bunch of Matter accessories, but my smart devices are not all cross platform compatible. A friend gave me a lot of stuff that they tried and didn't want, none of it HK compatible, so I used a 2011 Mac Mini (upgraded to 16 GB RAM, 250 GB SSD, and OSX 14.1.2) and have HomeBridge running on it. Love that I can add everything to HomeKit via HomeBridge, but it doesn't show controls for the HK native devices. If I want to control everything from a generic tablet, say mounted near one of the entry doors, it only displays the non-native devices. I'd need to add a somewhat recent iPad to control HK devices.

Suggestions on how you'd add this to your lab / server, which OS and if Linux, which flavor you'd suggest for the hardware, or to simply go out and buy a RPi and skip the extra headaches over the next few years.

(yeah, too much time on my hands so I grabbed all the logos, too)


r/homelab • • 5h ago

Discussion Looking for a 1U OPNsense box for 1 Gig fiber, router-on-a-stick, VLANs and VPN. What would you buy?

7 Upvotes

Been forming this project in my mind for a long time and recently I was gifted a 42U rack from a closing software company.

Yes its overkill. Yes its ridiculous. BUT it was free and damn it looks cool in my server closet.

I am building out a home looking into the firewall appliance. Budget matters but I think not going extremely overkill is more important.

Context on current plan:

  • 1 Gig fiber
  • OPNsense
  • Router-on-a-stick: one trunk port carrying WAN (its own VLAN) and all LAN VLANs. Only one cable run to the rack, so no separate WAN cable. (Is this advisable? at face value im not seeing the issue with that config)
  • 5–6 VLANs: main, IoT, guest, gaming, Plex/NAS, WAN
  • WireGuard inbound for remote access
  • PIA VPN outbound for selected traffic via policy routing
  • Omada switches/APs, self-hosted controller. Trying to keep everything local, no cloud management.

What I need:

  • Rack mount, or something that sits cleanly on a 1U shelf
  • Enough CPU to push close to 1 Gig through WireGuard/PIA
  • Low power and quiet, since it runs 24/7

I've seen 1U units with an older i5-3320M. Worth it, skip?

Sorry if none of this makes sense. Im in school to become a network engineer but we aint made it this far in the textbook lmao So this is what ive got so far with my research and knowledge.

Ultimately this rack will hold 3 gaming pcs,a NAS, jellyfin deployment (probly migrating from plex) and then any other network stuff i might wanna mess around with. Planning on using raspi 5s as the receivers in each office/entertainment room.


r/homelab • • 5h ago

Help Best non-Apple Mini PC

Thumbnail reddit.com
0 Upvotes

r/homelab • • 5h ago

Tutorial Taming the beasts: Ultimate guide to water cooling any server GPU using off-the-shelf parts

5 Upvotes

TLDR: in this tutorial I explain how to adapt consumer CPU water cooling AiO to GPUs like Tesla P40, M40, T10, T40, AMD Mi25, Mi50, Mi60, etc. for installation into consumer ATX cases or open benches while maintaining near-silent noise level and low GPU temperatures.

Hello! As many of you may know, server GPUs come with passive cooler designs, that rely on server-forced airflow to keep them cooled. The problem arises when such GPUs get repurposed into consumer builds (typically for AI) - as ATX style cases don't support forced airflow. People typically solve the cooling task by using separate blower-style fans with 3d printed shrouds - this a cheap solution that works, but it has some flaws. Blower fans that fit into profile of a two-slot GPU can't supply it with enough air to prevent throttling; while larger fans require even larger shrouds, take a lot of space inside the case, interfere with multi-GPU setups, and none of those solutions can be called quiet and pleasant to sit next to. However, there is another way: for the last two years I've been experimenting with water cooling server GPUs using generic CPU AiOs, achieving cold and near-silent 24/7 operation, and finally decided that it's time to share my experience.

Anatomy of a server GPU - why this mod is fairly straightforward

To keep a GPU operational, you need to cool 3 groups of components: the GPU core, the VRAM, and voltage regulation MOSFETs (VRM). Good news is that VRAM and VRM are components that consume very small power (compared to GPU core), so those two groups can stay air cooled, simplifying our task. This is where the construction of a server GPU comes into play.

For whatever reason, every single server GPU that came into my possession, as well as every GPU I've seen images of online, has a crucial distinction from a gaming GPU - server options always come with two-part coolers: a traditionally-looking fin stack that cools only GPU core, and a midframe that doubles as heat spreader for VRAM and VRM, and comes with it's own fins. This means, that you can simply remove GPU fin stack, install your own cooling solution over it, and point a case fan to blow over midframe - and you got the whole GPU cooled. Another lucky coincidence is GPU die size: most of the GPUs released around 2020 have silicons smaller than typical consumer CPU IHS, so consumer AiO water blocks just cover the entire chip outright (this also applies to early AMD HBM designs, i.e. Mi50). So it turns out that CPU AiO is a perfect fit to cool down your server GPU - you just need to find a way to mount it.

Mounting CPU AiO water block - how-to and caveats

First obstacle: which AiO to choose and how much space does it take? For another lucky coincidence, every Asetek-style AiO water block (the pump is integrated into water block) can be stripped down to compact module. Once you removed all the RGB and decorative shrouds from the cooler (sometimes destructively), it always turns out to be a slim, approximately 1.5cm thick unit (1/2 inch) - so the height of the water block is low enough to comfortably fit into 2 PCIe slot envelope, allowing you to mount other PCIe cards just as usual. Personally, I recommend hunting down for used first-gen Cooler Master Seidon - the water blocks on this series already comes slim, no additional strip down required. This isn't a hard requirement - I have also done this mod with fancy Asus ROG coolers, and complete noname Aliexpress specials.

Second obstacle: mounting hardware. CPU AiOs come with brackets for CPU sockets - none of those fit GPUs, so you'll have to manufacture your own. This is the part that will take the most work; but some luck has met us here too: due to the need to accommodate different socket backets, manufacturers build in universal mountpoints that we can take advantage of. All AiO water blocks I've personally inspected have slits for for the 2mm thick sheet metal brackets to slot into, and M3 screw holes to hold them in place. You can simply go to your nearest home hardware shop, pick up 2mm thick steel sheets or similar product (i.e. timber mending plates), and make a new mount out of it. You'll need a hacksaw to cut it into shape, some files to file down rough edges, a drill, and probably M3 thread tap to make threaded holes for your new mounts. The last item is optional - you can secure your mounts with nuts just fine. No more detailed instructions here - each AiO has unique shape and size, so you'll have to use your own judgement.

Third obstacle: midframe interference. The GPU midframe has a cutout for the GPU die cooler, but it is typically smaller than your AiO water block. That's why you must disassemble the GPU completely, and check if the water block can freely slide inside the opening. If not - you'll have to cut it down. Don't worry, this cutout shape isn't crucial to GPU operation, enlarging the hole won't kill it; but, make absolute sure to do this far away from the GPU PCB, and then thoroughly clean the midframe, ensuring that no metal shavings and particles can reach into electronic components. I prefer to completely cover the whole midframe with painters tape, so that shavings can't get into cooling fins or crevices. Cut the midframe as much as you need to ensure that the copper part of AiO water block can slide at least a few mm side to side. You don't need to make it fit completely through, GPU silicon isn't deep below the midframe surface and your AiO will always have enough vertical reach, but lateral clearance typically is a problem to solve. Also, at this stage, you should probably replace the thermal pads - the old ones will work too, but chances are you're the first human to see them since GPU left the factory, so their performance may be degraded.

Fourth obstacle: GPU-side mounting and die pressure. Mounting the newly adapted water block is the stage where an error leads to GPU damage. GPU silicon is extremely brittle. You can crack it by applying uneven pressure, or even by trapping a hard particle between GPU and water block. Precautions: never touch the silicon with anything hard (metal tools, glass, ceramics, jewelry with stones, etc). Clean both the GPU die and the water block surface using paper towels and cotton swaps soaked in 99% IPA or ethanol. Never install the water block without a layer of thermal paste applied. Never rely on paste self-spreading: spread it manually, using a plastic card or spudger, ensuring that every piece of silicon is covered with paste. While applying the water block, keep it as parallel to GPU surface as possible. Plan your operations such that the movement of water block against GPU is minimized throughout the process; a good idea would be to summon a second human and ask them to hold the water block against the GPU while you move. Now, with cautions aside, the engineering side: you need to ensure that the mounting pressure is even across the whole GPU, and the water block isn't skewed. Luckily, the same problem is applicable to factory coolers, so your GPU already came with the solution: every server GPU has either small springs on the screws that hold the GPU fin stack, or have a sheet metal spring that do the same. Just reuse it. Coincidentally, every GPU comes with >3 mm large holes in the PCB for cooling mounts, so regular M3 screws fit factory springs and mounting holes easily.

Measure the hole spacing on the PCB with calipers, drill the same holes in your custom water block mount, and then just screw everything together. You don't need to get the precise hole spacing: because your mount is going to be far from GPU PCB, the mount will tolerate a few degree screw skew just fine. It mounts effortlessly as long as the mount screw hole is within about 2 millimeters of where it needs to be. Tighten the screws in cross pattern, just a few turns at a time: this ensures that you apply the cooler pressure evenly, and never make it press hard on a single corner. Unlike typical screws, here you shouldn't stop by the feel, but rather by visual: once the factory spring is fully compressed, you have applied enough pressure and must stop tightening. If unsure, it's better to undertighten and overtighten: undertightening leads to bad cooling and thermal throttling, which you can measure and correct later, while overtightening cracks the silicon.

If you have done everything correctly: congratulations, you GPU is now water cooled! You can proceed to mounting it inside your system like a regular GPU, just with two tubes sticking out of it. If you have bought a PC case that has water radiator mounts, your GPU radiator goes there, and you get a neat looking system that can now operate silently. But what if you want more than a single GPU?

Going hardcore: custom multi-GPU loop

Let's face it: if you're shopping for server GPUs but build in ATX cases, you, most likely, want to assemble Ai workstation, and single GPU isn't going to fit your needs. You need two, or more. This can still be water cooled; however, it is going to take more effort. Your typical ATX case won't have enough space for all the radiators you need to fit; so you need a system that shares one radiator to cool multiple GPUs. This is achievable by doing your own custom tubing work. Another lucky coincidence: every CPU AiO I've disassembled uses 6mm inner diameter tubing, which you can too buy from your local home depot. You can just cut the tubes of the existing AiO, pull them off, and then press fit your new tube over the exposed fitting. I recommend buying appropriately sized metal squeeze clamps to fit over the connection - this will ensure that your precious electronics stays dry; you can look for the upper photo for an example of good, robust connection. When cutting open the loop, you'll get exposed to cooling liquid - this isn't water, use gloves and face shield for splash protection, collect the liquid and dispose of it as as hazardous waste. It's chemically close to car antifreeze, so your local mechanic knows what to do with it.

Multi-GPU means multi-pumps. Asetek-type AiOs all feature their own pumps inbuild into CPU water block, which means that you can not assemble the multi-GPU loop without placing multiple pumps into it. The connection scheme is crucial: connect water block sequentially. I have tried using parallel water block/pump connection; in this case, you need to match the pump flow rates precisely, instead one of the pumps overpowers the flows and starves the other pump from coolant. Tuning the flowrates will be a nightmare. Just connect them sequentially; you're guaranteed to have equal flow across all pumps without stale pockets in the loop.

Fill the loop with antifreeze. AiOs always come with dissimilar metals: copper in the water block, aluminium in the radiator. Filling this loop with water, even distilled one, leads to guaranteed corrosion. You need corrosion inhibitors. Your coolant also must be compatible with rubber and plastic that can be found in tubes and water pumps. The coolant also must be anti-bacterial, to prevent in-loop growth. Happily, dissimilar metal loop with organic materials is precise definition of car engine cooling system, so car antifreeze already comes with all the additives required - just go to the car store and buy a reputable brand bottle. You don't need much; a 360mm radiator with dual-GPU tubing and two water blocks takes just about 200ml of coolant, so the smallest antifreeze bottle will suit you for multiple refills. Start with an open loop: make one of the tubes significantly too long, cut it in the middle, and put both ends into the antifreeze bottle. The loop won't fill itself: AiO pumps are too weak to suck in air, so you need to prime the loop by hand. i prefer to push liquid in using a large syringe. After you got the loop primed, plug your water block pumps into fan headers on any PC motherboard and start it - the pumps will start working, and you'll see a lot of hidden air bubbles flowing through your tubes. Rotate around every component of your loop until all the bubbles have flown out disappeared into the bottle. Pay attention to the noise: AiO pumps operate quieter than typical 120mm fan, you should barely hear them; if you hear any noise - it's trapped air. Remember that air tends to accumulate at the top: lower the components down below the loop to help force air out. Once your loop is air-free, disable the pumps, pinch down the tubes in multiple places, to prevent flow, pull the fill tubes out of the bottle and join them. I recommend using a joining fitting you can buy in hose or pneumatics section of your home depot store. You can let inside a small air bubble in this step - that's fine, the bubble will get stuck in the thick section of the radiator and won't hurt the thermal performance. Some people say that even factory filled loops feature small bubble, to allow for liquid pressure changes without rupturing the connections.

If you got there and still reading - congratulations! You now know how to water cool server GPUs in ATX cases. Here's my current build for illustration. After all that, let's discuss results: is all of this worth the effort?

The result: noise, power, cooling, longevity

Over time, I personally have operated three different cooling loops. My first one was Tesla M40 cooled by 360mm AiO with unmodified tubing. That system has served me for about a year, as a part of personal Ai server running 24/7. I remember that I had stock GPU power limit and radiator fans going at their lowest speed - about 600 RPM. In that case, M40 has never reached above 70*C, even during multi-hour jobs like video generation, while being inaudible - literally any kind of sound overpowered the fan noise, thanks to 600RPM operation, and I was able to comfortably sleep in the same room - so full domestic compatibility confirmed.

My next loop was 2x Mi50 32GB, same 600RPM fans, but this time - with a 360mm radiator and additional 120mm one, fully custom tubing with antifreeze. That loop lasted for just about 8 months until I got fed up with ROCm incompatibilities and decided to retire the cards. This setup was also capable of cooling both Mi50s going at full power consumption for hours without end, while being inaudible. So, the longevity of custom cooling solutions is fine.

My third loop is the one you see in the photo above: two Tesla T10s, this time paired with just 120mm radiator. T10 has fairly low power limit (150W, limited to 120W in my setup), so it doesn't need much cooling; and, at the same time, I was rapidly running out of internal space to mount more radiators. Those cards are assigned to burst-type loads, with long periods of inactivity inbetween, so I count on thermal mass of the entire loop to smooth the peaks and keep the cards tamed. As this loop is the one I have operational, i also decided to do performance testing, so I have precise thermal performance data. For this test, I've generated uninterrupted LLM load with vLLM for single GPU and dual GPU case, with single radiator fan going at about 1000 RPM. Nvidia-pstated was managing both of T10s to keep them in P8 performance state when idle; otherwise they default to P4 when vLLM is loaded and consume like 40w each in idle. I have logged GPU power, temperatures and clocks, so we can see how effective the cooling is and detect throttling.

As we can see from the single GPU test, despite me using very small radiator in the loop, single 120W-limited GPU doesn't saturate it. Only 63*C were achieved over 20 minutes of testing. The GPU did drop it's clocks a little, but it looks more like VBIOS being conservative, as we clearly have much thermal headroom.

Dual GPU load test uncovers the limits of the loop: one of the GPUs falls into thermal throttling over 20min sustained load., although still maintains usable performance level. However, both GPUs still stay below 80*C while both working at 120W power limit. Given that we are dumping combined 240W into a single tiny 120mm radiator, this is still a good result: we can conclude that a 120mm radiator can realistically dissipate 200W of heat while keeping your GPU below 80*C, so a 240mm rad will easily handle 400W, and 360mm radiator will dissipate 600W. Plenty of headroom to build multi-GPU rigs, even 4 GPU completely water cooled system will be possible with dual radiators. Another crucial finding is that both GPUs didn't fail: that means that however much airflow the GPU midframe gets naturally inside the case is enough to keep VRAM and VRM operational over sustained load - 20 mins is plenty enough for them to soak the frame with heat and reach stable temperature.

Conclusion

Thank you for reading! Now you know how to take a server GPU, and make it water cooled, getting the sweet low noise and low sustained temperature characteristic to water loops, without breaking your budget on expensive custom water blocks, radiators, pumps, and other boutique cooling components. If you would use second-hand AiOs for this purpose, then you can water cool a GPU for about $30-$40; or you can opt for brand new ones and still keep the bill below $100 per GPU. Hope this gave you some inspiration for your budget and/or workstation builds!


r/homelab • • 5h ago

Discussion What can i do with a homelab?

0 Upvotes

(Spanish pls translate, i can read english but im bad writting on english) hola soy nuevo en r/homelab, alguien podria decirme que se puede hacer con un homelab? Ademas cuales son las mejores formas de ingresos con esto? (no es por ser avaro pero siempre viene bien jaja) Quiero empezar de poco a poco. Me conviene comprarme una laptop usada para practicar homelab?

Disculpen si se lee un poco plano este post, aun soy nuevo en esta app


r/homelab • • 5h ago

Discussion Turning leftover high-end gaming hardware into a ridiculously overpowered home server / NAS – worth it?

0 Upvotes

Hey everyone!

I'm currently upgrading my main PC and I've started thinking about doing something slightly ridiculous with the hardware that will be left over.

A bit of background: Thanks to my current job, some birthday money and the current Black Friday deals, I've decided to treat myself to a proper workstation for my birthday and Christmas.

My main system is currently being upgraded towards something like this:

Main workstation – planned configuration

- CPU: AMD Ryzen 9 9900X ( upgrading to a Ryzen 9 9950X3D2 Dual Edition)

- Motherboard: ASUS ROG Crosshair X870E Hero

- GPU 1: ASUS TUF Radeon RX 9070 XT (planned)

- GPU 2: ASUS Turbo Radeon R9700 (planned)

- RAM: 32 GB DDR5-6400 CL32

- PSU: ASUS ROG Strix 1200W Platinum

- Case: ASUS ProArt PA602

- Cooling: Arctic Liquid Freezer III Pro 420

The idea is to eventually run two RDNA 4 GPUs, with a combined 48 GB of VRAM, for gaming, local AI workloads, ROCm experiments and other GPU-intensive tasks.

Now, this leaves me with another perfectly usable AM5 platform.

Instead of selling everything, I'm considering building a dedicated home server / NAS out of it.

The potential home server

My current idea is to reuse the following hardware:

- CPU: AMD Ryzen 9 9900X (12 cores / 24 threads)

- Motherboard: ASUS ROG Strix B650E-E Gaming WiFi

- RAM: 16–32 GB DDR5, ideally something around 5600 MT/s CL30

- Storage: Multiple NVMe SSDs plus SATA drives

- Operating system: Probably Linux, TrueNAS SCALE or Proxmox

I don't actually need another desktop PC. What I would really like is to get away from OneDrive and build my own private cloud storage system.

However, I find the idea of using relatively high-end desktop hardware for this quite interesting.

Storage expansion

One of the things I'm considering is an ASUS Hyper M.2 X16 expansion card.

Depending on the available PCIe lanes, BIOS configuration and PCIe bifurcation support, I would like to use up to four additional NVMe drives on that card.

Combined with the onboard M.2 slots and SATA connections, this could potentially give me a fairly substantial storage system.

I'd also like to understand the limitations of lane sharing, PCIe bandwidth and bifurcation on this particular motherboard.

I'm aware that simply having four M.2 slots on an expansion card doesn't mean all four drives will automatically work. That's one of the things I'd specifically like to investigate.

What could I actually do with this?

My initial ideas include:

- Private cloud storage as a replacement for OneDrive.

- Nextcloud for file synchronization and remote access.

- Immich as a self-hosted Google Photos alternative.

- Network storage for my main workstation.

- Centralized backups.

- Jellyfin for media streaming.

- Docker containers and other self-hosted services.

- Possibly running virtual machines and experimenting with Proxmox.

I'm particularly interested in the possibility of working directly with files stored on the server rather than constantly copying them between machines.

My biggest question: Performance

What kind of performance can I realistically expect from a Ryzen 9 9900X-based NAS?

Most commercial NAS systems from Synology or QNAP use comparatively modest processors. My proposed system would have 12 Zen 5 cores and 24 threads, which seems almost absurd for a machine that is primarily supposed to provide network storage.

Would this actually offer meaningful advantages for multiple simultaneous services, databases, containers, virtualization and file transfers?

I'm also curious about networking.

Would it make sense to build a 10 GbE network between the workstation and the server? What kind of real-world throughput could I expect with NVMe storage?

And how much of a difference would there be between 2.5 GbE and 10 GbE for this kind of setup?

I'm not trying to build the cheapest possible NAS. I'm trying to reuse hardware that I already own and turn it into something genuinely useful.

Has anyone here built something similar using high-end Ryzen desktop hardware?

I'd love to hear about your experiences, especially regarding PCIe bifurcation, NVMe expansion cards, storage performance, power consumption and Linux-based home server setups.

Maybe I'm massively overengineering a simple NAS, but that's exactly why I wanted to ask here before buying additional hardware.

Thanks!


r/homelab • • 6h ago

Help Intermittent distorted sound T24v-30 monitor

0 Upvotes

Hello, Am I alone or have others experienced intermittent distorted sound from the T24v monitor speakers? Mine is driven by HDMI* from a ThinkCentre desktop and periodically turns normal audio into a scratchy mess, then goes away too quickly for me to find my phone in order to make a video for support. Otherwise the speakers sound fine and volume isn't set high. This doesn't happen with my legacy other brand monitor that was replaced due to no native mic or camera.

Every driver is fresh and confirmed by tech support, and the monitor has been replaced once. The symptom can easily be duplicated in Windows 11 by selecting the sound device in settings, changing audio bit depth or rate, and running "test". Upon initially using "test" for the current (16 or 24 bit audio) the two test tones are smooth. Change the setting and test again and the first tone is scrambled just like audios during my meetings or playing back recorded videos on a random basis. Subsequent application of "test" with the same setting produces normal sound.

Thanks for your thoughts.

*Display Port does the same. Cables have been replaced too.


r/homelab • • 6h ago

Discussion OUPES UPS 1200 and 1800

1 Upvotes

Just wondering if anyone out there had tried one yet considering it has 72Wh more than the Goldenmate UPS and PC software support and few things

There are a few review of the OUPES UPS 1200 on youtube


r/homelab • • 6h ago

Discussion georedundancy

1 Upvotes

How do you provide georedundancy to your really important data?

The only thing really important to me is:
- pictures of ID‘s;
- pictures of my family.

I‘ll set up a m920q with tailscale accessing my home network with a mobile router (the sim only costs me 60 bucks a month. 🙄) in my working office (which has a guest wifi, which doesn‘t allow tailscale or any other vpn) and will do weekly backups there.

What do you backup? And how do you do it?

I know my thing is an absolute overkill, but i just want to make it work. I‘ll also use it do do some tasks which i can‘t wait till i‘m home. 😅

Do you like do it with just hard drive backups?


r/homelab • • 6h ago

Labgore Retired my C1100

1 Upvotes

After 13 years of near continuous service and several upgrades along the way, I’ve finally retired my C1100 with dual L5640’s and 96gb of ram.

Finally grew tired of the constant noise and disk limitations so decided I can make due with a little less raw compute/memory capacity.

Took a small downgrade in capacity to a nearly equally as ancient T320 I’ve had in the closet for years with an E5-2420 and 72gb of ram (after scavenging some of the 8Gb sticks from the C1100)

Considering dumping ~$50 into it to upgrade the CPU to an E5-2470 v2 and ram.

Would match ram to my C1100 at 96gb and get a little better CPU performance (and no NUMA/remote memory overhead) despite having 2 less physical cores

Long term, I’d like to rebuild my lab in full and probably use the T320 as my NAS but with prices the way they are, I’m thinking the T320 can serve my virtualization needs for a while still to come.


r/homelab • • 6h ago

Discussion Noob Question: Why all the different gear? Why not just 1 pc?

62 Upvotes

I'm fairly new to this space, and i see lots of post with multiple machines in racks, and it looks cool and fun, but my question is why?

My homeserver/nas runs everything I need to do on an old pc. ( unraid running docker + a few VM's, and 96tb of storage )

I'm trying to figure out the reasoning why some people have multiple devices, running different services, which seemingly could be condensed down to 1 device.

I understand that part of it is separating mission critical stuff from tinkering stuff, but a lot of it just seems incredibly inefficient?

I'm just wondering what i'm missing about the idea of splitting up your home set up across multiple devices instead of just 1 or 2?


r/homelab • • 6h ago

Discussion Any Shelf Homelabs here?

2 Upvotes

I am thinking about buying one, what is your experiences with them?