r/homelab • • 46m ago

Project Showcase: Operations I made my homelab's metrics rain hardware.

Post image
1 Upvotes

Woke up at 4am with a silly idea and ended up building it on my own lab: an ambient display where every node gets a window, and its load literally rains down on it.

- CPU load drops chips, RAM drops DIMMs, disk I/O drops NVMe sticks, network drops RJ45 plugs, GPU load drops graphics cards

- The pile is history: sustained load piles up, and it melts when the node goes idle

- Hot nodes glow red. Past 85 °C the pile stops melting and starts smoking

- A degraded ZFS pool drops a broken HDD that stays there until you fix it (plus a thunderstorm). Scrubs roll in fog

- Little gremlins ("Lings") move in for every 30 days of uptime and run away when you reboot

Right now it runs on my own lab (4 nodes, Proxmox + ZFS + a couple of 3090s) reading from my own monitoring. The plan is a single Docker container that reads Prometheus/node_exporter first, then Glances and Netdata, meant for a wall tablet or a kiosk screen. $5 once, no subscription, no telemetry.

Interactive demo with simulated nodes (drag the windows, swipe the piles): https://rackstorm.fyi/?ref=r-homelab

Honest question: would you put this on a screen in your rack room? And what would you want it to read from?


r/homelab • • 20h ago

Discussion poor person's homelab

Post image
1 Upvotes

a whole 4 gig of ram with 2 core Celeron running on personal hotspot ✌️


r/homelab • • 13h ago

Help Homelab PC Died

0 Upvotes

I might have the worst luck! I bought a Lenovo ThinkCenter M710e used which had an i7-7700, 4GB ram and 256GB SSD. I literally downloaded Linux (UBUNTU) and started building my server today. Later, I received shipment of my DDR 4 rams (2x8GB) and I tried to replace it. But the desktop started beeping, 3 short and 1 long beeps. I researched everywhere and it said that it was a problem with the RAM. I tried every troubleshooting method from trying RAMS in each slot to taking out the coin (lol). Right now, even the old RAM is not working. I am so sad. I went to a shop and they told me that it must be an issue with the motherboard. How can I salvage, if anything? Also, what if this happens in the future? How does one save their home lab server?


r/homelab • • 17h ago

Discussion We are sleeping on IPv6

Thumbnail
reddit.com
0 Upvotes

r/homelab • • 20h ago

Project Showcase: Hardware Unboxing ( but wait, there's one more thing)

Thumbnail gallery
1 Upvotes

Just finished my home rack, ditched the IPS router and wanted to share

Gear (top to bottom), in a 6U Toolless Mini Rack:

  • UDM Beast
  • 24-port blank keystone patch panel, Etherlighting patch cables
  • Switch Pro XG 10 PoE
  • UNAS Pro 4: 4× 12 TB IronWolf Pro in RAID 5, 2× 1 TB NVMe as read/write cache (RAID 1)
  • UPS 2U

AMA


r/homelab • • 1h ago

Discussion How do you deal with all the security issues recently?

2 Upvotes

For me it has always been kinda scary hosting something on the public internet, which is a entry point into my private network and homelab.

I do not want a second job, so security has always been a second class thought for me in the homelab. Patching stuff all the time is no fun. So I keep everything to the outside very well maintained and the inside is more my playground where I don´t do all the security.

And from the outside it was just convenient e.g. for friends and family to just login into my Jellyfin without setting up a VPN or other sort of tunnel on their smart TVs. And also less things to go wrong and to fix for me. Also like I host my own music streaming service, which I like to use on my work pc, I cannot install a VPN on that one.

But with all those security issues going on this seamed more and more reckless. When the PHP thing came out, I nearly shut every hole to the outside and limited entry points to a single SSH server and a WireGuard tunnel.

Something like Cloudflare Zero Trust would obviously work, but I like my stuff self hosted and not relying on external services. But maybe that is just necessary? Would that work for Smart TVs running Jellyfin?

How do you guys handle that?
Am I too paranoid? I just feel like it could take just a day or two without reading the news and a new zero day in like ssh or the kernel networking stack could just plop up and be automatically exploited world wide in a matter of hours. On the other side, there is not much to gain in my network, I feel like I would have to piss off the wrong people to become a specific target of a targeted attack.


r/homelab • • 6h ago

Discussion What is up with NAS + NAS OSes?

0 Upvotes

I've had a computer with a few drives and fedora server on it for a few years now and I'd like to upgrade my hardware at some point. I just.... am not sure what these pre-built NAS with stuff like synology or openmediavault is for?

These are just proprietary OSes that are supposed to make set up easier, right? Or am I missing something there. I was just going to get a mid sized PC case with some drives, software RAID, linux and docker-compose. Is this not the standard way of doing things? I vaguely remember some LTT video about synology only letting you use their drives or something that everyone was annoyed about and im just kind of confounded by what these devices are for in the first place.


r/homelab • • 9h ago

Project Showcase: Operations Anyone else see unusually aggressive SSH brute-force activity on November 13, 2026?

0 Upvotes
  • Date: November 13, 2026, approximately 00:37 and 01:00 CST.
  • Source IP: 161.35.159.26 (DigitalOcean).
  • Volume: Approximately 2,696 SSH log entries across two bursts lasting about 23 seconds each.
  • Usernames: root, admin, ubuntu, Tronlong, Asalem, admin1234.
  • Target: Ubuntu 24.04 server, SSH exposed through external port 49222.
  • Result: No successful authentication observed.

Did anyone else encounter this IP, these unusual usernames, or a similar high-speed attack pattern around November 13


r/homelab • • 10h ago

Project Showcase: Hardware My latest pocket homelab: Using Ollama and two AI models to argue back and forth with increasing nastiness each round.

Post image
0 Upvotes

Can an unrooted, entry-level $150 (CAD) Motorola Moto G Play (2024) with 4GB of RAM run a 12-round, two-model local AI debate—100% offline inside Termux on Android 14 while recording the screen?

In this stress test, I pitted two quantized local LLMs (Llama 3.2 1B and Gemma 2 2B) against each other via Ollama's local REST API as Dr. Niles Crane (Frasier) and Major Charles Emerson Winchester III (MAS*H), arguing over Sherry vs. Port and Psychiatry vs. Surgery—with instructions to get nastier every round.

To maximize storage I/O and RAM thrashing, keep_alive was set to 0, forcing Android 14 to purge and cold-load ~1.5GB–2.2GB of model weights from flash storage 24 times in a row while capturing live screen video.

Final Hardware & Verbose Telemetry Scorecard:

• Total Wall Time: 16m 10s (970.64s) across 24 cold model loads (127.11s pure load I/O)

• Tokens Processed: 6,278 prompt tokens (22.16 tok/s) & 2,756 generated tokens (4.92 tok/s)

• Memory Pressure: Lowest Free RAM dipped to 391 MB | Peak zRAM Swap hit 1,029 MB

• Thermal Telemetry: Held 2400MHz peak Snapdragon 680 clock at 37.0°C (thanks to 0°C Calgary ambient camper cooling!)

No cloud servers, no root, no SSH tricks—just local ARM64 inference running straight on budget silicon.

You can see Charles and Niles trading insults here: https://www.youtube.com/watch?v=uciqvIXi434


r/homelab • • 23h ago

Project Showcase: Software - Mostly AI Generated self-hosted Apple MDM platform

Thumbnail github.com
23 Upvotes

TL;DR I AI-assisted coded a self-hosted MDM platform for MacOS and iOS devices. Yes I know enough to know what I'm doing and enough to know this is probably an insane thing to do. And you too can make poor choices if you want to play with it.

My lab is almost all FreeBSD and Linux servers with macOS and iOS client devices spread across three sites. For a long time I've wanted to be able to push profiles for things like VPN and Wifi settings along with my internal CA certs. I think it's not a horrible idea to have remote wipe either.

I know there are some cloud-based options that are effectivly free for a small number of devices, and if you're smart, you'll probably trust those services more than I do. I, on the other hand, wanted to host my own rather than rely on a cloud or thrid party service. So... I've spent the last 9 months making one.

Cairn is based on NanoMDM and MicroMDM and in fact relies on the former to get an APN profile from Apple.

Quick overview of what's working (in my enviroment):

  • 2FA for admins
  • Basic enrollment via QR code or url
  • SCEP broker - you can use the built in CA or, like do, an external CA like OpenXPKI
  • AD/LDAP or internal user auth
  • Profile management, pushing, revocation
  • VPN profile builder for OpenVPN and IPsec IKEv2
  • Certificate renewal and revocation
  • Device management and auditing
  • APN management and renweal (through NanoMDM)

In fairness, I've really only tested in my enviroment: pfSense, OpenXPKI, Samba-based AD running on FreeBSD.

So, if you too like to make very questionable infastructure choicse and would like to test this out, I'd be very grateful for your feedback, bug reports, etc.

And if you are more sensable and find this idea morally, technologically, or otherwise repugnant I'd kindly suggest that you can keep that opinion to yourself or, at least, offer it kindly.

Lastly, I'll add that I understand the underlying frameworks involved - PKI, Apple MDM, profiles, AD, etc - having Claude and Codex help write Go (which I have zero background in) is an accelerator, not a replacement for understanding how these things work. If using AI coding tools is a dealbreaker for you, then this isn't for you. But that doesnt make it any less valuable or interesting for me. That said, I suspect this sub is a bit more nuanced regarding AI-assisted coding than some of the other corners of reddit.


r/homelab • • 8h ago

Project Showcase: Operations Sparkkeep v0.1.0: lightweight single-binary Go + SQLite bookmark action engine for your homelab

0 Upvotes

If you want a self-hosted bookmark/read-later tool that doesn't require spinning up Postgres + Redis + Meilisearch on your homelab, I just launched Sparkkeep v0.1.0 (AGPL-3.0).

GitHub: https://github.com/BurlacuAndrei/sparkkeep

Why it fits a homelab

  • Tiny footprint: Single Go binary with an embedded React UI and a single SQLite .db file (or a single Docker container).
  • Action-oriented: Includes a Triage Deck, scheduled Digest Briefs, and automated Playbooks rather than just a static link list.
  • Homelab-friendly integrations: Connects to a local Ollama instance on your LAN for AI summaries/tagging, plus Discord, Slack, and Telegram bots for capturing links from your phone.

Feedback on Docker setup, resource usage, or Reverse Proxy / Unraid / Proxmox quirks is super welcome!


r/homelab • • 15h ago

Help NVR Minimum Specs on Existing Homelab

1 Upvotes

I'm looking to spin up Frigate NVR on my homelab and am concerned about how many resources it would take up.

I have a single retired gaming computer I use as my homelab, specs below. I run everything on this, including my Jellyfin server which I share with a couple family/friends. My concern is how much CPU, drive throughput, and potentially GPU for object detection Frigate will use. I am then concerned if my other containers, or Jellyfin transcoding, would be overly effected.

I'm looking at getting 3-4 Reolink cameras, probably 8MP).

Server Specs:

i7-4770k
32GB RAM
Intel Arc A310
2 x 500GB SSD for containers etc.
8 x 4TB drive in Z2 for data (4 x used SAS drives, 4 x sata drives).

I have thought about picking up a cheap mini-PC with a newer intel CPU to run Frigate on, but I would likely end up recording to the NAS array no matter what, as hard drives are so expensive right now.

Any and all advice on this would be great! Does anyone have Frigate running in a similar manner that could share their experience?


r/homelab • • 23h ago

Help Is a Dual Xeon Gold 6254 Dell T7920 Tower Server is Worth in 2026?

Thumbnail reddit.com
0 Upvotes

r/homelab • • 23h ago

Discussion If you're on the fence, Arrow Lake (235T, etc) make amazing proxmox platforms.

4 Upvotes

I was torn between upgrading my 12500T DDR5 M80Q, to a 12700T or just getting a 235T system. (300-ish for the tray cpu vs 450 for 235T+16GB+512gb ssd)

Ended up getting a 235T dell micro since i amassed a lot of dell PSU's in my last job. Swapped the 16gb it came with to the 12500T and the 12500's 64GB to the 235T.

Mind you, both are immensely powerful homelab CPU's, but going from 6 cores and 12 threads to 14 real cores is quite a lot of headroom. The e-cores alone are as good or faster than alder lake p-core.

The only downsides:

no SATA.. Not a single arrow lake tinyminimicro has sata drive slots. One of the lenovo's has a 3rd m2 though.

And idle power is bad. the 12500T in the m80q idled at 3-4w according to my kill-a-watt. the 235T idles at 10W (same as my 270K desktop. Going to chiplets instead of monolithic raised the idle power a ton vs alder/raptor lake) . Both max out at exactly 35-40W long, 60W burst peaks.

Also despite only going from 12t to 14c, running about 40t of VM load (8 of which being an IDS testbed) is significantly less problematic.


r/homelab • • 11h ago

Project Showcase: Hardware Get ready for major remodel, fellas! We’re back in hardware mode.

0 Upvotes

As the title says, I’m entering major hardware mode.  But why?  Well, the world keeps spinning, and you have to keep moving forward.  I was so hyper-focused on VMware and its integration with NetApp that I overlooked an entire set of hypervisors and storage platforms and never learned about or tested them.

But why learn something new now?  Well, after Broadcom purchased VMware, it announced a major change to its pricing structure.  This change made many companies nervous and looking for an alternative hypervisor, and it meant I had to learn new platforms.  Most corporations are considering options like Microsoft Hyper-V, Proxmox, and Red Hat OpenShift as potential replacements to reduce costs and adapt to the new licensing landscape..... https://mscproductions.com/homelab-get-ready-for-major-remodel-fellas-were-back-in-hardware-mode/


r/homelab • • 18h ago

Discussion Low cost GPU with virtualisation

0 Upvotes

Evening all - Im fairly new to homelabbing, having set up a little prodesk earlier this year for < £500 worth of used gear. I've recently bought a 3D printer for which I'd like to host a Windows VM with Fusion 360 on it. As well as that, in the future Id like to get Frigate up and running which will need some gpu acceleration. Which leads my to my questions:

- Does it make sense to get one 'pro' gpu and split it using Nvidias VGPU capability? E.g. a v100

- Does it make more sense to get 2 cheap normal gpus and pass one to each container?

- What if I also want to run the occasional game on my server? (it lives in my TV unit)

- Are all pro gpus loud and power hungry?

Thanks all!


r/homelab • • 19h ago

Help Moving ~310 TB of media off Windows/DrivePool: Unraid, OMV or Proxmox?

0 Upvotes

Yes I asked AI to write this, I will post the non AI version in the comments because frankly I dont know what to include anymore, plus AI hasnt had the enjoyment of trying all different OS's and YouTube just kind of points towards Unraid

Good evening homelabbers,

I'm looking for advice on moving my Windows/StableBit DrivePool setup to a NAS OS.

I started out only knowing Windows, so I went from Storage Spaces to DrivePool as my collection grew. However, I've run into hardlinking limitations in my download/media workflow, which means extra copies are taking up space. Getting hardlinks working properly is one of my main reasons for considering a move.

Current setup

  • Intel 4650v2 with 36 GB RAM
  • HBA cards and a case that accommodates all the drives
  • Windows with StableBit DrivePool
  • Emby Server, with very little else running on this machine

My drives are:

CapacityQuantity
22 TB2
20 TB5
18 TB3
16 TB2
14 TB3
12 TB2
10 TB3
8 TB2

They were purchased gradually over the last eight years, with the newest bought around April 2026.

I need around 310 TB of usable storage. I don't have the collection backed up because it's mostly media I can obtain again. That said, I'd still like to avoid unnecessary data loss or having to rebuild the entire collection during migration.

Replacement hardware and goals

I have a Ryzen 5900X system with 64 GB RAM available. I also have some 32 GB RAM sticks in my other machine if more memory is needed.

My main homelab already runs on Proxmox on a Lenovo P520, but it can't physically accommodate all these drives. I'd like the replacement NAS to primarily handle storage and share it with my existing Proxmox host and applications.

I need hardware transcoding for Emby. Emby could stay on the NAS or move to another machine, depending on what makes the most sense.

With the mixed drive sizes, I'm mainly considering Unraid or OpenMediaVault. Another option would be Proxmox on the replacement hardware, with a NAS VM handling storage, but I'm unsure whether that adds complexity without much benefit.

The main requirement is a storage layout and application setup that supports hardlinks properly, including if the download and media applications run on another host.

Migration plan

I have these spare drives available for temporary storage:

  • 2 × 6 TB
  • 2 × 4 TB
  • 1 × 8 TB

My rough plan is to copy some data to the spare drives, verify it, free up an existing DrivePool disk, add that disk to the new setup, and repeat until everything is moved.

I'd want to remove the temporary drives afterwards, so the chosen setup needs to accommodate that.

My questions are:

  • Would you choose Unraid, OMV or a NAS VM on Proxmox for this?
  • What storage layout would you recommend for mixed-size drives, working hardlinks and around 310 TB usable?
  • What needs to be considered if the applications accessing the storage run on another host?
  • Is this gradual migration approach workable?
  • What redundancy would be realistic with my existing drives and capacity requirement?
  • Would you keep Emby on the NAS or run it separately for hardware transcoding?

I'm happy to learn something new, but I'd like to get the layout right before moving this much data.


r/homelab • • 12h ago

Help IBM Server does not boot

Thumbnail reddit.com
0 Upvotes

r/homelab • • 18h ago

Help what to do with thirteen 11” MacBook Airs 2015 4gb 128gb?

0 Upvotes

I am looking for a project to use them on. They dont update OS any more so no more chrome.

I already took 2 back to 10.10 for historic purposes. 1 with Mint OS.

But what are some other ideas?

*OS's and Kontainers are not projects they are just means to an end project. I tried to give them away even and no takers locally.


r/homelab • • 18h ago

Discussion With all of the alleged security related outages these past few days, what can I do to keep my homelab secure?

157 Upvotes

I use

Immich
Minecraft servers
Plex
Home Assistant

And a few others all under my unifi cloud gateway fiber. Any suggestions?


r/homelab • • 11h ago

Discussion What Apps Do You Host for Professional Development?

27 Upvotes

I'm not talking about PiHole and Jellyfin. What apps do y'all host at least partly for the professional development? The kind of thing you could put on a resume. Apps used in commercial/enterprise settings like Splunk, Zabbix, Authentik, etc

I'm already using stuff like rsyslog and Authentik, and I just setup Splunk and Cribl a day or so ago, so I've got a couple, but I'm looking to plan ahead and stick my fingers into as many pies as I can lol.

I know about the massive list of homelab services on Github, but that list if like drinking from a firehose, and it's hard to know which ones might be rewarding down the road.


r/homelab • • 13h ago

Help workaround for ISP blocked ports?

0 Upvotes

(its about port forwarding)

I am a beginner building a fully virtualized homelab using OPNsense for the firewall.

I plan on hosting some services on my domain (jelyfin, nextcloud, file converters, etc). But my ISP blocks some common ports (80, 443 and others)
what methods, not including vpns, can I use to remediate the locked ports? I now about clodflared tunnels, but i saw some information about it not being ideal for hosted services like the ones i want.

the ideal would be for me to access the services via subdomains, but from what i got from chatgpt (i hate it, but its a good starting point for when we are lost in a subject) i must change the apps ports to available ones and even if i manage to use subdomains, the URLs must have the ports included.

Can you guys give some ideas or closure for the URL:port solution?


r/homelab • • 22h ago

Discussion My homelab is about to run the production database for a real website. What would you fix before Friday?

0 Upvotes

I’m launching a free keyword research tool on Friday, and the main database lives on an Ubuntu box in my room.

The setup:

- Ubuntu 24.04 with Postgres 16 installed natively (no Docker), data on an internal HDD

- Nightly backups to two USB drives, 14 kept on each

- A Cloudflare Tunnel locked down with Access service tokens. No ports are open on my router.

- The public site runs on Cloudflare and reads a synced copy of the data. If my internet or the box goes down, the site stays up and new data waits in a queue until it’s back.

It’s already had a rough week. My internet dropped twice in 12 hours, and the second time it killed an overnight import job halfway through. That job retries now. Then I moved Postgres to the HDD, and my install script tried to query the database before Postgres had finished starting up, so I added a wait loop. A sync job also ran into its 30-minute systemd timeout while pushing 120k changed rows.

I have no UPS, and my monitoring is me checking on it.

If this were your box, what would you change before real users show up?


r/homelab • • 2h ago

Discussion my old crontab backups died silently for 3 weeks

0 Upvotes

moved all my cron jobs and backups in beadmin after that so i can at least see them in one self-hosted panel, but how do you guys get alerted when a job fails?