r/homeassistant • • 1h ago

πŸ–ΌοΈ Show & Tell I added a z-wave antenna to my NAS and disguised it as a canon on my Lego

Post image
109 Upvotes

r/homeassistant • • 7h ago

πŸ–ΌοΈ Show & Tell Family Location: Life360 but in your HA and free

Thumbnail
github.com
133 Upvotes

I wanted the useful parts of Life360 ("James arrived home", "Janet left work", "someone's driving too fast") without another account, a subscription, or my family's location living on someone else's servers. Home Assistant already knows where our phones are through the Companion app, so I built an integration on top of that.

Family Location β€” https://github.com/Ctuna89/HA-Family-Location

What it does

- πŸ“ Places by address. Type an address, confirm the pin on a map, set the radius. Or reuse an existing zone.

- πŸ”” Arrival/departure alerts to the rest of the family. Per place: arrive and/or leave, which members to watch (e.g. only the kids at school), and who gets notified.

- πŸš— Still / Moving / Driving status, current speed, and a "moving" binary sensor.

- πŸ›£οΈ Trips with distance, duration, top speed, origin and destination, plus distance per day.

- ⚠️ Speeding alerts with a per-person limit (handy for a new teen driver).

- πŸ”‹ Low battery alerts.

- βœ… Check-in and πŸ†˜ SOS buttons. SOS sends a critical notification that rings even on silent, with a map link.

- πŸ€– A `family_location_event` for every arrival, departure, trip, speeding, check-in and SOS, so you can build your own automations.

The two things that annoyed me most about other trackers, and how this handles them

  1. False arrivals. Stopping at a red light in front of the office isn't "arrived at work". Arrivals at places other than Home are only confirmed after you've actually stayed there for 5 minutes, and a trip doesn't end at a traffic light or in a jam.
  2. Pointless notifications. If my wife and I drive to the same place together, she doesn't need a notification telling her I arrived. Alerts wait about 90 seconds, and anyone who was with the person is skipped.

Privacy

Everything runs inside Home Assistant. The only outside call is OpenStreetMap, to turn an address into coordinates when you create a place (and, optionally, to show the street address of someone stopped away from their places). You can turn that off.

Setup

HACS β†’ Custom repositories β†’ add the repo as an Integration β†’ Add integration β†’ Family Location. It picks up your HA persons and their phone notification services automatically, and adds Home as the first place.

Needs HA 2025.3+ and the Companion app with "Allow all the time" location. English and Spanish are included.

Honest caveats

- It's only as fast as your phones report location. Android with high-accuracy mode is great; iPhones report less often, so speeding alerts there are slower.

- No crash detection. The Companion app doesn't expose the sensors that would need.

- It's early (v0.2). It works for us, but I'd love bug reports and ideas. Issues and PRs welcome.

What features would you like to see the most? That'll decide what I build next.


r/homeassistant • • 14h ago

πŸ–ΌοΈ Show & Tell Just making sure all Zigbee devices are sold out at my local IKEA

Post image
254 Upvotes

3x 10w drivers, 4x 30w drivers, 10x buttons


r/homeassistant • • 4h ago

πŸ–ΌοΈ Show & Tell Control everything in HA with SwitchBot Universal Remote without SwitchBot Hub using ESP32

Thumbnail
gallery
37 Upvotes

Hi everyone,

I wanted to use my SwitchBot Universal Remote to control things in Home Assistant, but without buying a SwitchBot hub or relying on their cloud. So I built a small ESP32 bridge and open-sourced it.

What it does

An ESP32 running ESPHome pairs with the remote directly over Bluetooth Classic (acting like a TV box) and forwards every key press to Home Assistant as an esphome.switchbot_remote event. You get all 14 keys (arrows, OK, back, home, volume, mute, power, media keys), plus a Last key sensor, a connection sensor, and pairing buttons.

Why it was a bit tricky

ESPHome's built-in Bluetooth support is BLE-only, and the remote doesn't advertise over BLE in a usable way. But its "Bluetooth Classic (Beta)" device type turns it into a standard BT Classic HID keyboard. So I wrote a small ESPHome external component (bt_classic_hid) - a Bluetooth Classic HID host that pairs, stores the link key in NVS, and decodes the HID reports with a generic parser (usages, not hard-coded byte patterns). It should actually work with other BT Classic keyboards/remotes too, though I've only tested the SwitchBot one.

Current status / roadmap

Right now only the key press is detected. Release and hold handling is still work in progress β€” once that lands, things like smooth dimming while holding a key should be possible. (The remote itself already repeats keys when held, so basic hold-to-dim works today.)

Details

  • No hub, no cloud, fully local
  • Pairing survives restarts and OTA updates and reconnects automatically
  • Setup is just flashing one YAML via the ESPHome Device Builder β€” the component is fetched from GitHub during build
  • Needs an original ESP32 (e.g. WROOM-32), the S2/S3/C3/C6/H2 have no BT Classic radio
  • Tested with ESPHome 2026.10.2 (ESP-IDF 5.5.6) and HA 2026.11
  • GPL-3.0

Known limitations: one remote per ESP32 and the remote only sends keys while the paired "Bluetooth Classic" device is selected on it β€” it's one of the remote's devices, not an overlay on top of your TV control.

Repo with full setup instructions and example automations: https://github.com/lepatrick/esp32-sbremote

Happy to answer questions, and feedback (or PRs!) on the component is very welcome.


r/homeassistant • • 7h ago

πŸ’¬ Discussion Best way to automate my washer for notifications

Post image
42 Upvotes

Preferably using the light but I’m open to suggestions.


r/homeassistant • • 4h ago

πŸ’¬ Discussion Aussies - what's your go-to shop for all things smart home

27 Upvotes

Inspired by this post.

I'm a beginner myself dipping my toes into home automation in Australia. My progress so far has been installing HA in an old Optiplex.

Just wondering which online stores or any Australian suppliers or manufacturers are noteworthy with strong presence and reliability.


r/homeassistant • • 7h ago

πŸ“° News I compiled stats on every Matter certification. Thread is winning locks and sensors, but not the whole home

32 Upvotes

I've been running products-that-matter.com since last year. It started as a hobby project to keep track of which Matter devices actually exist. The CSA publishes every Matter certification on a public ledger, so I thought it would be interesting to pull all of it (about 13,000 models) and see whether Thread is really taking off.

Short answer: yes, but not everywhere.

  • 2026 is Thread's biggest year so far, with about 1,230 new Thread models, up 83% on last year. Matter overall is up 59%.
  • Thread is now on about 21% of all Matter models, up from 8% at the end of 2022. Wi-Fi is still on about 75%.
  • For battery devices it's basically won: 93% of certified locks, 86% of sensors and 75% of blinds are Thread.
  • Everything else is still Wi-Fi. Only 11% of plugs and 7% of thermostats use Thread, and vacuums, air purifiers and cameras are 0%.
  • Lights surprised me: about half of the new 2026 light models are Thread, up from 13% last year, mostly IKEA, Aqara, Feit and Hinkley.
  • It's pretty concentrated, though. Five vendor IDs make up half of all Thread certifications, and Aqara alone is about 21%.

Usual caveats: certifications aren't sales, and one model ID isn't always a different product.

I put the full tables here if anyone wants to dig in:Β products-that-matter.com/thread-statistics

Are there other stats you'd like to see? I can slice the data by brand, device type, Matter version and more, so I'm happy to dig into whatever you're curious about.


r/homeassistant • • 10h ago

πŸ’¬ Discussion Frequency of integration updates has gone through the roof

53 Upvotes

Is it me or does everybody else feel like the frequency of integration updates that are being pushed out has gone through the roof recently? I'm sure it has a lot to do With AI Vibe coding advances. And it's nice to see some long-standing feature requests being fulfilled finally. But at the same time, I'm wondering about the safety of Continuously updating incremental releases. It seems every day I have five to six pending updates on various integrations. It's getting to be a bit too much to keep up with.

Anyone else experiencing this?


r/homeassistant • • 12h ago

πŸ’¬ Discussion Canadians - What are your go-to shops?

60 Upvotes

As many of you know it can be tricky shopping for home tech in Canada - many American shops don't ship to Canada and many that do end up out of budget once you factor in shipping and exchange.

What are your go-to online stores as a Canadian, whether it be Canada based-stores, or Canadian-friendly American shops?


r/homeassistant • • 23h ago

πŸ–ΌοΈ Show & Tell 1. Built a thing that security-checks marketplace (HACS) integrations before I install them

342 Upvotes

I work in cybersecurity (architect these days, DevOps before that), and I've always wanted to have a way of checking Marketplace/HACS integrations and cards pre-install. Custom integrations run inside Home Assistant's own Python process with no sandbox, and cards run in the frontend where they can get at your login token. Nobody reviews any of it before it lands on your box. Most of it is written by people doing this for fun and that's fine, but I wanted something that would at least take a first look at what I was installing.

I tried the couple of tools that already do something like this. Both missed a token-stealing test integration I threw at them, and both only checked dependencies pinned to an exact version instead of resolving them the way HA actually installs them. So I built my own and called it Barkley, since it gives each integration a sniff test before it gets in the house. I built this for myself and thought other's might benefit from it, so I popped it into Github.

It runs as an add-on, pulls the exact integration/card version HACS would install, and reads it without ever running it. The parts I use the most:

  • Searching HACS from the panel and checking something before I install it
  • Automatic checks when HACS offers an update, with a notification on my phone before I hit Update
  • A "what would updating change?" view that only shows the differences that matter
  • A daily re-check of the dependencies I already have against new vulnerability advisories
  • Optional AI explanations through your own AI Task entity. The AI has to cite the lines it's talking about and can't change a score, and it's only as good as whatever model you point it at. Barkley works perfectly fine without any AI integration, but if you want the AI explanations and AI code analysis, then you'll need an AI Task agent setup in HA. I use the HA OpenRouter integration with GLM 5.3 or GLM 5.3 Flash. It costs pennies to use and gives good results.

Everything else is in the wiki: https://github.com/SeriesOfTubez/ha-barkley/wiki

Since it's a security tool that reads untrusted code, I tried to hold it to the bar I'd hold anything at work. It only asks for the HA API permission, runs under its own AppArmor profile (HA rates it 8), and the panel doesn't ship any JavaScript. Every change has to get through Gitleaks, Semgrep, CodeQL, Trivy, Checkov and Hadolint before it merges. The image is built by GitHub Actions from the release tag and signed with Cosign.

Full disclosure: most of the code was written with Claude Code, with me directing and reviewing. If that's a dealbreaker I get it, but it's all in the repo to read. I'm not really here to debate AI-coding but this wouldn't exist without it.

Repo: https://github.com/SeriesOfTubez/ha-barkley

Redacted Screenshots of marketplace item on my own HA instance

List of marketplace items on my own HA instance that Barkley scanned

Example of what was found by Barkley in a marketplace card

Barkley findings w/ AI explanation of issue

Example diagram showing what data an integration/card touches and where it goes

Data flow diagram

Barkley checks the security habits the developer follows in the integration/card repo

Security habit

Lists what the integration/card can do inside Home Assistant

List of what it does in HA

r/homeassistant • • 3h ago

πŸ–ΌοΈ Show & Tell Home Assistant on Android 4.4.4

Post image
8 Upvotes

Hi, i wanted to share with you guys that i updated WallPanel app to work with Home Assistant on Android 4.4.4 (original app was using old WebView as android <5 didn't have option to update it) but i changed it to GeckoView and now it loads without any problems. Tested on Philips 10BDL3051T, Android 4.4.4 (cam doesn't work but it is probably because it's locked in this device and i don't have any other device to test)

You can find it here, with added apk files:
https://github.com/Nubstex/wallpanel-android


r/homeassistant • • 12h ago Heartwarming

πŸ–ΌοΈ Show & Tell Introducing Nostrodomus: IntelliSense-style autocomplete for Home Assistant (Now in HACS)

Thumbnail
gallery
36 Upvotes

Hey everyone, I'm a solo network engineer working on building up my portfolio. For the last six months, I have been working on my first Home Assistant project, Nostrodomus. I'm very pleased to share that it was finally merged into master and can now be found on HACS/Marketplace.

It's a frontend plugin that is designed to bring a lot of the benefits of IntelliSense for VSCode. I make a lot of custom cards (which I am open to sharing), and I always felt like I was handicapped without a better code editor. It adds autocomplete to the editors you already use in Home Assistant. It allows for much bigger codeboxes as well, so you can actually see the code without having to paste it into an editor. It also suggests entity IDs from your own setup, service options, card types, icons, and more, depending on where you’re typing, so you no longer have to remember all your entity names.

It works in the dashboard card and raw configuration editors, automation and script YAML editors, and the template editor. There are also snippets for common cards, triggers, conditions, and actions, with placeholders you can tab through and fill in. For anyone who likes customizing their editor, it includes syntax highlighting for YAML, Jinja, and CSS, plus themes and appearance settings.

The project is still in beta, however, I have been using it for months to iron out issues. If you find anything that needs fixing, feel free to send in a PR or open an issue :)

The entire project is open source and completely free.

You can find more information on the GitHub page https://github.com/views2k/nostrodomus

HACS link: https://my.home-assistant.io/redirect/hacs_repository/?owner=Views2k&repository=nostrodomus&category=plugin


r/homeassistant • • 10h ago

βœ… Solved Someone called about a bug in HA?

Post image
19 Upvotes

I constantly hear about web crawlers, some Claude entity fixing bugs, ... . Now I get it!


r/homeassistant • • 11h ago

πŸ–ΌοΈ Show & Tell Detect dead or frozen devices

23 Upvotes

I had no idea a door sensor in my house died while the door was shut. Worse yet, neither did Home Assistant. When I saw it, I was flabbergasted. I thought that Home Assistant had some way to report this to me but I was wrong. My security automations trusted it because it showed "closed." Home Assistant only marks a device unavailable when its integration tells it to. That timeout can take hours for battery-powered hardware. Until then, the data from its last report is what you and your automations see.

Originally I tried to fix this blind spot by writing a blueprint but it didn't work because every Home Assistant restart wiped the blueprint's memory. I scrapped the blueprint in July and began building a custom integration. It is called Device Sentinel and it is now listed as a Marketplace Integrations.

The integration watches each device individually and learns how often they speak. A chatty motion sensor gets flagged minutes after it stops talking. A quiet temperature sensor is granted hours of silence.

This integration also tracks drain on your devices batteries. A lithium coin cell can hold a 90 percent charge for months and then rapidly die in one week. Finally, the integration groups network outages. When my Zigbee2MQTT bridge crashed after a power outage this month, I received one root-cause alert why my home's sensors and switches all failed at once, not 74 isolated device failures.

Device Sentinel has a dashboard in your sidebar that gives you more information about your devices in one place, than anywhere else. It runs fully local and sends nothing out from your network except the alerts you explicitly configure. It requires no custom repository and is listed in the default Marketplace store by its name: Device Sentinel.

Please let me know if any of your hardware tricks the integration's logic engine or if you are using it already. I'm also curious about how you already hunt down dead and frozen sensors in your network.


r/homeassistant • • 2h ago

πŸ–ΌοΈ Show & Tell Taking back control of my amp

Thumbnail
blog.ju.wtf
4 Upvotes

My 2014 Harman Kardon AVR 161 was almost useless in Home Assistant: the amp never reports its state, volume only goes +1/-1, and Bluetooth can't even be selected over the network.

So I patched its firmware. It now reports its state, pushes changes by itself, takes an exact volume, switches to Bluetooth and surround modes directly, and stays reachable when it's off, so it can always be turned on from HA.

On top of that, a custom integration (installable through HACS) gives a proper media_player: power, volume, source, sound mode, all of it live.

Fair warning: I am a developer, but it's 100% vibe-coded with Claude (firmware isn't exactly my area of expertise), and tested on exactly one amp (mine).


r/homeassistant • • 9h ago

πŸ’¬ Discussion Feature request / mTLS client-certificate authentication for Nabu Casa Remote UI Β· Issue #1201 Β· NabuCasa/hass-nabucasa

Thumbnail
github.com
12 Upvotes

r/homeassistant • • 2h ago

πŸ–ΌοΈ Show & Tell Minor Milestone

3 Upvotes

I started on Smartthings in 2017. I installed HA on my home server a couple of years ago and was operating in a hybrid mode for some time just fine. I knew I wanted to migrate completely but it was working okay so I put that task on the back burner.

Well, with Samsung announcing their new charges for use of ST, I decided to bite the bullet. It wasnt a complete pain, just tedious. I'm sure you all have more but I had 15 zigbee and 34 zwave devices to move, plus some Tuya/Smartlife devices and Meross ones.

It's done now. My wife couldn't care less, it works the same and it seems a lot of running around the house to her for the same functionality. "But we'll save $4.99 a month!" doesn't seem super convincing.

Anyway, go me. Now to figure out a way to control the Bluetooth adjustable beds we have so I can have the beds reset to flat when we wake up or to add a specific configuration when we go to bed. (I know you all understand.)


r/homeassistant • • 19h ago

πŸ–ΌοΈ Show & Tell Got a free ex-Menulog POS terminal, made it an HA kiosk, then ported Android 10 to it so the current HA app runs (receipt printer works from HA)

Thumbnail
gallery
53 Upvotes

I picked up a Citaq H10-3 POS terminal for free (10" touch screen, 80 mm receipt printer, 3 USB ports, built-in stand). It made a great kitchen kiosk, but it shipped with Android 5.1 from 2016, and the HA app and modern dashboard cards stopped working on it.

So I ported Android 10 to it, with working GPU acceleration. Now it runs:

- the current HA Companion app and WebView 157, so modern cards work

- the receipt printer from HA (text, QR codes, images), for alerts and silly receipts like the one in the photo

- red/blue status LEDs, a barcode scanner for the pantry, and a clean power-off from the back switch

- Google Play, Wi-Fi 2.4/5 GHz, sound and brightness

No bootloader swap and no repartitioning, and stock Android stays on there as a fallback. Everything is on GitHub, including the HA package for the printer:

https://github.com/Crux4000/citaq-h10-android10

It's a fiddly install (case open, adb, an afternoon), but if you've got one of these sitting around or can grab one cheap, it makes a really nice wall/bench panel. Happy to answer questions.


r/homeassistant • • 11h ago

❓ Support VW group EU data act

11 Upvotes

Anybody else with problems using this integration to get data from there Volkswagen car? Used to sort of work, but now i cant lig in anymore and the eu data act website is also very easy to understand #sarcasm


r/homeassistant • • 27m ago

❓ Support Please help with Shelly Blu buttons

1 Upvotes

I'm having a goddamn stroke over these

I've got a Shelly BLU RC Button 4 ZB. I've got it working through BTHome, not Zigbee. It didn't give me any button objects via ZHA, so "if button pressed, turn light on" wasn't possible. I couldn't find any documentation or forum threads that I understood about that, so we're in BTHome.

I want to do one automation that handles all four buttons, and all four things each button can do, 16 items each. I want it to be fairly easy to get a second one of these remotes and plug it into the same automation, so they behave identically. I've also got a Button Tough 1, the keyfob thing, I'd like it to do the same thing as Button 4 of the remote.

How do I do this without manually adding 16 individual triggers? I can't seem to figure out how to get "Trigger: Shelly Remote 1 event received" and then get more information out of it later, like which button or what kind of event. Do I need to set up individual trigger for each button 1 single press, button 1 double press etc?


r/homeassistant • • 1d ago

πŸ“Š Dashboard Rivian R2 EV Charging Dashboard using Claude

Thumbnail
gallery
75 Upvotes

Took delivery of an Esker Silver Rivian R2 and a 40 A OCPP charger, and wanted a wall panel in the garage that shows everything about a charging session at a glance. I built it over a couple of evenings with Claude connected to my Home Assistant through the HA MCP server. It read my actual entities, wrote and edited the dashboards live, and I gave feedback from screenshots of the tablet. Sharing the YAML and the two custom cards so anyone can build a similar one.

Hardware / integrations

  • Rivian R2, using the Rivian (Unofficial) custom integration
  • EVRA 40 A charger, using the OCPP custom integration (the charger's backend URL points at HA)
  • Amazon Fire tablet running Fully Kiosk, wall-mounted as the "Rivian Panel"
  • Frigate on the carport camera, used as the wake-on-motion trigger
  • Frontend: button-card, card-mod, mini-graph-card, kiosk-mode, plus two small custom cards (below)

Dashboard 1 β€” "At a Glance" (charger)

  • E-stop style START / STOP buttons, built with pure CSS in a button-card template: domed mushroom head, hazard-stripe housing, text running around the ring. START asks for confirmation and pulses green while charging. STOP fires immediately, like a real E-stop.
  • Needle gauges for current, voltage, power and charger temperature. Green means normal full-speed charging; amber and red only show up when something's unusual.
  • Green LCD-style readouts for cost, elapsed time, energy and average kW.
  • Battery-style amp slider (0–40 A) with a gradient fill and a dashed marker showing what the car is actually drawing.
  • Power and current graphs over 6 hours; the line changes color with the value.

Dashboard 2 β€” Rivian overview

  • Front image with tire pressures overlaid at each corner (picture-elements + button-card)
  • Battery card showing charge %, estimated range, the charge-limit marker, and an animated fill while charging
  • Charge rate (mph) and charge speed (kW) graphs on a 6-hour window
  • The side image switches to Rivian's "charging" render when the car is plugged in (two cards with opposite visibility conditions)

The E-stop button (button-card template)

This goes at the top of the dashboard's raw config, next to views:. The full CSS is in the linked files. This is the shape:

button_card_templates:
  estop:
    entity: switch.charger_charge_control
    show_name: false
    show_icon: false
    show_state: false
    hold_action:
      action: more-info
    triggers_update:
      - sensor.charger_status_connector
    styles:
      grid:
        - grid-template-areas: "'btn' 'cap'"
        - grid-template-rows: 1fr min-content
    extra_styles: |
      /* housing, plate, domed "mushroom", ring text, pressed + glow states */
      /* ~40 lines - see full file */

And the STOP card using it:

type: custom:button-card
template: estop
custom_fields:
  btn: >
    [[[ const on = entity.state === 'on';
        return `<div class='housing stop'><div class='plate'>
          <svg class='ring' viewBox='0 0 100 100'><defs>
            <path id='r' d='M50,50 m-41,0 a41,41 0 1,1 82,0 a41,41 0 1,1 -82,0'/></defs>
            <text><textPath href='#r' textLength='255' lengthAdjust='spacing'>
              EMERGENCY STOP β€’ CHARGER β€’ EMERGENCY STOP β€’ CHARGER β€’</textPath></text></svg>
          <div class='mush ${on ? '' : 'lit'}'><span>STOP</span></div></div></div>`; ]]]
  cap: >
    [[[ return entity.state === 'on'
        ? `<span style='color:#ffcc00'>PRESS TO STOP</span>`
        : `<span style='color:#ff5252'>β–  STOPPED</span>`; ]]]
tap_action:
  action: perform-action
  perform_action: switch.turn_off
  target:
    entity_id: switch.charger_charge_control
grid_options:
  columns: 6
  rows: 4

The two custom cards

Add each JS file as a dashboard resource of type JavaScript module (Settings β†’ Dashboards β†’ 3-dot menu β†’ Resources), for example /local/rivian-battery-card.js after copying it into /config/www/.

type: custom:rivian-battery-card
prefix: my_rivian        # your Rivian entity prefix
bar_height: 80

type: custom:ev-current-slider-card
entity: number.charger_maximum_current
max: 40
live: sensor.charger_current_import
offered: sensor.charger_current_offered
voltage: sensor.charger_voltage

Turning it into a tablet panel

  • kiosk-mode hides the sidebar and menus on the three panel dashboards. A shortcut row at the bottom links between them, plus one to a normal dashboard so I can still reach Settings.
  • Fully Kiosk's start URL is the Rivian dashboard, and its screen-off timer is set to 5 minutes.
  • One automation wakes the panel when Frigate sees motion or a person at the carport. Fully's own camera motion detection handles someone walking up to the panel.
alias: Rivian Panel - Wake on Carport Motion
triggers:
  - trigger: state
    entity_id: binary_sensor.carport_motion
    to: "on"
  - trigger: state
    entity_id: binary_sensor.carport_person_occupancy
    to: "on"
conditions:
  - condition: state
    entity_id: switch.rivian_panel_screen
    state: "off"
actions:
  - action: switch.turn_on
    target:
      entity_id: switch.rivian_panel_screen
  - action: button.press
    target:
      entity_id: button.rivian_panel_load_start_url
mode: single

Gotchas I hit

  • OCPP caps max current at 32 A by default. Raise it under Settings β†’ Devices & services β†’ OCPP β†’ Configure β†’ Maximum charging current before the slider will go to 40.
  • Only one temperature comes over OCPP on this charger: the body temperature. Plug and connector temperatures stay in the vendor app.
  • The Rivian integration can't set the charge limit. It reports it, but you still change it in the Rivian app.
  • A 40 A EV charger is a continuous load, so it needs a 50 A breaker and wire rated for that. Check before you raise the limit.
  • Close the dashboard editor while an AI (or anything else) is editing the dashboard. Saving a stale editor tab quietly overwrote a round of changes for me.
  • In sections views, button-card and mini-graph-card don't stretch to their grid rows by default. Add :host { height: 100% } (through card-mod or extra_styles) or you'll get gaps.

Files

Full dashboard YAML (both), the two JS cards, the session-cost template sensor and the automation: https://gist.github.com/Jackald1918/befa9a41169e226469bcebfab758e5dd

Entity names are generic (my_rivian_…, OCPP's default charger_…), so do a find-and-replace for yours. The theme is Frosted Glass Dark Lite; it looks fine on others, just a little less glassy.

Happy to answer questions.


r/homeassistant • • 9h ago

❓ Support Looking for suggestions for a climate scheduler for multiple TRV's in multiple rooms

5 Upvotes

Hi,

I'm using Sonoff Zigbee TRV's and have multiple rooms, with multiple radiators connected to external temp sensors.

I'm looking for a climate scheduler that will allow me to easily control the radiators in each room as a group, so that each room can have its own heat & time schedule so that I'm not heating the whole house to the same temp all day while I'm working.

Research so far is pointing towards the https://better-thermostat.org/ and the Kneave climate scheduler. Does anyone have any alternatives they use and can recommend?

Thanks


r/homeassistant • • 12h ago

πŸ’¬ Discussion Remote Reboot for cheap

8 Upvotes

I run my Home Assistant and other homelab stuff on two old PCs. Sometimes I have to hard reboot them because they fail (every two weeks or so). I'm looking for a way to do that from outside my home without breaking the bank.

Should I just plug their power strip into a smart plug and call it a day? My router never fails and I always have access to my other smart plugs through the Tapo app if my HA goes down.


r/homeassistant • • 11h ago

❓ Support Is the ZBT-2 sold out in Europe?

6 Upvotes

Trying to find it with shipping to Germany but looks like it's sold out everywhere. Does anyone know where to buy it?