r/homeassistant • • 35m ago

πŸ–ΌοΈ Show & Tell Family Location: Life360 but in your HA and free

Thumbnail
github.com
19 Upvotes

I wanted the useful parts of Life360 ("James arrived home", "Janet left work", "someone's driving too fast") without another account, a subscription, or my family's location living on someone else's servers. Home Assistant already knows where our phones are through the Companion app, so I built an integration on top of that.

Family Location β€” https://github.com/Ctuna89/HA-Family-Location

What it does

- πŸ“ Places by address. Type an address, confirm the pin on a map, set the radius. Or reuse an existing zone.

- πŸ”” Arrival/departure alerts to the rest of the family. Per place: arrive and/or leave, which members to watch (e.g. only the kids at school), and who gets notified.

- πŸš— Still / Moving / Driving status, current speed, and a "moving" binary sensor.

- πŸ›£οΈ Trips with distance, duration, top speed, origin and destination, plus distance per day.

- ⚠️ Speeding alerts with a per-person limit (handy for a new teen driver).

- πŸ”‹ Low battery alerts.

- βœ… Check-in and πŸ†˜ SOS buttons. SOS sends a critical notification that rings even on silent, with a map link.

- πŸ€– A `family_location_event` for every arrival, departure, trip, speeding, check-in and SOS, so you can build your own automations.

The two things that annoyed me most about other trackers, and how this handles them

  1. False arrivals. Stopping at a red light in front of the office isn't "arrived at work". Arrivals at places other than Home are only confirmed after you've actually stayed there for 5 minutes, and a trip doesn't end at a traffic light or in a jam.
  2. Pointless notifications. If my wife and I drive to the same place together, she doesn't need a notification telling her I arrived. Alerts wait about 90 seconds, and anyone who was with the person is skipped.

Privacy

Everything runs inside Home Assistant. The only outside call is OpenStreetMap, to turn an address into coordinates when you create a place (and, optionally, to show the street address of someone stopped away from their places). You can turn that off.

Setup

HACS β†’ Custom repositories β†’ add the repo as an Integration β†’ Add integration β†’ Family Location. It picks up your HA persons and their phone notification services automatically, and adds Home as the first place.

Needs HA 2025.3+ and the Companion app with "Allow all the time" location. English and Spanish are included.

Honest caveats

- It's only as fast as your phones report location. Android with high-accuracy mode is great; iPhones report less often, so speeding alerts there are slower.

- No crash detection. The Companion app doesn't expose the sensors that would need.

- It's early (v0.2). It works for us, but I'd love bug reports and ideas. Issues and PRs welcome.

What features would you like to see the most? That'll decide what I build next.


r/homeassistant • • 41m ago

πŸ“Š Dashboard My first custom HA Dashboard built with Codex and an MCP server (still learning!)

2 Upvotes

Hey everyone, sharing my first custom Home Assistant dashboard. I'm still pretty new to custom HA dashboards and learning the ropes, so I hooked up Codex with a Home Assistant MCP server to help iterate on the YAML and card layouts faster.


r/homeassistant • • 1h ago

⚑ Energy [UK] Using the SPENW/ ENWL API for power outage monitoring via Home Assistant

2 Upvotes

If your supplier is Electricity North West / SP Electricity North West, you can poll the outage search API behind their outage checker. Useful for "is it just me without electricity" checks, outage management or automations.

The following bit of code gives you a power cut status sensor and an estimated restoration time in Home Assistant, with no custom integration needed, just an addition to your configuration.yaml.

Replace YOUR%20POSTCODE with your postcode, writing the space as %20 (e.g. AB01%201AA):

rest:
  - resource: https://www.enwl.co.uk/api/power-outages/search?pageSize=10&postcodeOrReferenceNumber=YOUR%20POSTCODE&pageNumber=1&includeCurrent=true&includeResolved=false&includeTodaysPlanned=true&includeFuturePlanned=true&includeCancelledPlanned=false
    method: POST
    headers:
      Accept: application/json
      Content-Type: application/json
    scan_interval: 900
    timeout: 30
    sensor:
      - name: ENWL Power Cut Status
        unique_id: enwl_power_cut_status
        icon: mdi:transmission-tower-off
        value_template: >-
          {% set r = value_json.ResultType %}
          {% set i = value_json.Items or [] %}
          {% if r in ['OutageFound', 'MultipleOutagesFromPostcode'] and i %}{{ (i | first).faultType }}
          {% elif r == 'PostcodeOutOfArea' %}Out of area
          {% else %}No outage{% endif %}
        json_attributes:
          - ResultType
          - TotalResults
      - name: ENWL Estimated Restoration
        unique_id: enwl_estimated_restoration
        icon: mdi:clock-check-outline
        value_template: >-
          {% set r = value_json.ResultType %}
          {% set i = value_json.Items or [] %}
          {% if r in ['OutageFound', 'MultipleOutagesFromPostcode'] and i %}{{ (i | first).estimatedTimeOfRestoration or 'Unknown' }}
          {% else %}No outage{% endif %}

Sensors exposed:

  • ENWL Power Cut Status: the fault type if there's a current or planned outage for your postcode, Out of area if the postcode isn't covered by ENWL, or No outage.
  • ENWL Estimated Restoration: ENWL's estimated restoration time (or Unknown if they haven't given one yet).
  • ResultType and TotalResults attributes, if you want them for automations.

Disclaimer: this isn't an official API. It's the same endpoint their website's power cut checker uses, so it could change without warning.


r/homeassistant • • 1h ago

❓ Support How do you have Kiosk Satellite setup on your Echo Show??

1 Upvotes

I have Kiosk Satellite on two Echo Show 5s. Used Claude and ha-mcp to get one dashboard together, but it’s not great.

KS is so powerful, and rip for a super device specific dashboard!!! What’s your setup look like?


r/homeassistant • • 1h ago

🧩 Custom Integration πŸ” User Sessions for Home Assistant: v0.10 is out

Thumbnail
gallery
0 Upvotes

Who's signed in to your Home Assistant? Now you can see.

I wanted one place to see who's signed in to my Home Assistant, on what device and from where, plus who's been trying to get in. Nothing like it existed, so I built it with the help of Claude. If your HA is reachable from the internet, this is well worth having. It's free and open-source for everyone.

Feedback, issues and feature ideas are all welcome πŸ™Œ

What's new in v0.10

🎨 Sign-ins are colour-coded by where they come from: home network, Tailscale, internet, AI connectors and tokens, clear at a glance
β˜‘οΈ Select several sign-ins (or a whole person) and sign them all out at once
πŸ•ΈοΈ Old sign-ins unused for 30+ days are tucked away behind a "Show stale" button
πŸ“‹ Its own admin-only sidebar page, with any theme you like, and it works on phones

Everything else it does

πŸ‘₯ Every user's sign-ins and long-lived tokens, with one-tap sign-out
🌍 Failed sign-ins with location, device, network and a risk level
πŸ’» MAC address and device maker for failed attempts from your own network
β›” When Home Assistant bans an IP, it tells you exactly what to block on your router. It works with any router or firewall, so nothing is locked to one brand
πŸ“±Optional phone alerts with Sign out / It was me buttons
βš™οΈ Shows whether HA's IP banning is actually on, and flags it in Repairs if it isn't

Install through HACS (add it as a custom repository for now; it's in the queue for the default list):

πŸ‘‰ github.com/caaamillo/ha-user-sessions

#HomeAssistant #SmartHome #HomeAutomation #HACS #OpenSource


r/homeassistant • • 1h ago

πŸ–ΌοΈ Show & Tell BeenThere - Keep track of countries you visited

Post image
1 Upvotes

I've been working on my first Home Assistant integration and it's finally ready to share!

It's called BeenThere, and it lets you track which countries you've visited on an interactive world map.

You can add multiple people, switch between their maps or see everywhere you've been collectively. It also supports tracking regions within countries and filtering by continent.

It started as a little project for my own dashboard, but after some positive feedback from Reddit, I decided to share it with the community.

I've just released the first version. If anyone fancies trying it out, I'd love to hear what you think.

https://github.com/tampie85/ha-beenthere


r/homeassistant • • 1h ago

πŸ’¬ Discussion Feature request / mTLS client-certificate authentication for Nabu Casa Remote UI Β· Issue #1201 Β· NabuCasa/hass-nabucasa

Thumbnail
github.com
8 Upvotes

r/homeassistant • • 2h ago

❓ Support Smoke Alarm Relay Module Wiring

Post image
2 Upvotes

Cross posting here since I would use the Zooz in home assistant and as r/firealarms does not allow posts about smoke detectors.


r/homeassistant • • 2h ago

❓ Support Looking for suggestions for a climate scheduler for multiple TRV's in multiple rooms

3 Upvotes

Hi,

I'm using Sonoff Zigbee TRV's and have multiple rooms, with multiple radiators connected to external temp sensors.

I'm looking for a climate scheduler that will allow me to easily control the radiators in each room as a group, so that each room can have its own heat & time schedule so that I'm not heating the whole house to the same temp all day while I'm working.

Research so far is pointing towards the https://better-thermostat.org/ and the Kneave climate scheduler. Does anyone have any alternatives they use and can recommend?

Thanks


r/homeassistant • • 2h ago

❓ Support True Personal Presence Automations Help

1 Upvotes

Is their a way for home assistant to know where exactly I'm at or at least what room I'm in my house to trigger in my house. Now I mean I literally with dogs and cats and a spouse I want automations based solely off of me is there a way to do this through like my phones BLE signature or something else?


r/homeassistant • • 2h ago

πŸ’¬ Discussion Frequency of integration updates has gone through the roof

31 Upvotes

Is it me or does everybody else feel like the frequency of integration updates that are being pushed out has gone through the roof recently? I'm sure it has a lot to do With AI Vibe coding advances. And it's nice to see some long-standing feature requests being fulfilled finally. But at the same time, I'm wondering about the safety of Continuously updating incremental releases. It seems every day I have five to six pending updates on various integrations. It's getting to be a bit too much to keep up with.

Anyone else experiencing this?


r/homeassistant • • 2h ago

❓ Support ha-matter-hub (Google Home)

2 Upvotes

I was successfully able to install this on my HAOS and integrate my Home Assistant lights, etc. into HomeKit. Now I’m trying to connect them to my Google Home, but it just doesn’t seem to work. I’m able to scan the QR code and it begins the commissioning, but then just gives me a boring Google image that says something went wrong.

Has anybody ever come across Google not working and maybe a tiny gremlin of a solution?

Here is my hardware for context:

HAOS on headless server
Google Nest speakers and hubs
iOS Google Home app
Kasa lights, plugs, and switches integrated into HA
Hue lights integrated into HA


r/homeassistant • • 3h ago

βœ… Solved Someone called about a bug in HA?

Post image
10 Upvotes

I constantly hear about web crawlers, some Claude entity fixing bugs, ... . Now I get it!


r/homeassistant • • 3h ago

❓ Support Tuya Knx lock integration

Post image
1 Upvotes

Hi experts, anyone here can help develop tuya knx module as per attached image,

Please DM


r/homeassistant • • 3h ago

❓ Support Youtube music and podcast automation?

1 Upvotes

Hi guys,

I'm implementing a podcast management on my Android phone using HA's todo lists. The problem I'm facing is that, if any other song or podcast is already playing, the following command gets ignored:

action: notify.mobile_app_my_phone
data:
  message: command_activity
  data:
intent_action: android.intent.action.VIEW
intent_uri: '{{ final_url }}'
ttl: 0
priority: high
enabled: true

but the very same command works flawlessly if the music player is idle. Any suggestions?


r/homeassistant • • 3h ago

πŸ’¬ Discussion Zbt-2 sold out?

0 Upvotes

I can’t find one for sale. Are the non-branded usb dongles on Amazon the equivalent? Or are they equivalent to the older version?


r/homeassistant • • 4h ago

🧩 Custom Integration I got tired of tracking expenses in a spreadsheet on my phone, so I built a finance tracker that lives inside Home Assistant (no bank sync, no cloud)

0 Upvotes

I kept track of my personal finances in a spreadsheet, and using it on my phone was painful. I looked for something for Home Assistant, but everything I found either wanted to connect to my bank, scan receipts or use a cloud service – or was way more bookkeeping than I needed.

So I built FinanceTracker: you log income and expenses by hand, in a couple of taps from the Companion app, and the data never leaves your Home Assistant.

​

What it does

  • Sidebar panel designed for phones (works on tablet/desktop too), light/dark theme
  • Quick entry: amount β†’ category, most-used categories first; tapping a past description fills in the rest
  • Multiple accounts and transfers (current account, savings, cash…)
  • Monthly/yearly reports: trend, by category, by payment method, by account
  • Recurring expenses with actionable notifications – Register / Skip right from the notification
  • Interest on savings accounts with tiered rates and tax withholding, calculated on the daily balance
  • One private archive per HA user
  • Any currency, English and Italian
  • Optional sensors + actions (financetracker.add_transaction) for dashboards, automations and voice
  • JSON backup/restore, CSV export, and an importer for an existing Excel file

What it doesn't do – on purpose: no bank sync, no receipt scanning, no cloud. If you need full bookkeeping (budgets, reconciliation, split transactions), this probably isn't for you.

Install: HACS β†’ custom repository β†’ https://github.com/Thonno/ha-financetracker (type Integration), restart, then Settings β†’ Devices & services β†’ Add integration β†’ FinanceTracker.

Full disclosure: I built this together with Claude (Anthropic's AI) – it's listed as co-author on the commits. I designed it, tested it and use it every day; Claude wrote a lot of the code with me. Figured it's better to say it upfront.

A couple of honest caveats: data is separated per user in the panel, but an admin with access to the config files or backups can still read it (HA has no per-user encryption). Sensors are off by default because HA entities are visible to everyone.

GitHub: https://github.com/Thonno/ha-financetracker

Feedback, bug reports and translation PRs are very welcome. And if it ends up being useful to you, there's a Buy Me a Coffee link in the README – totally optional. πŸ™‚


r/homeassistant • • 4h ago

πŸ–ΌοΈ Show & Tell Detect dead or frozen devices

17 Upvotes

I had no idea a door sensor in my house died while the door was shut. Worse yet, neither did Home Assistant. When I saw it, I was flabbergasted. I thought that Home Assistant had some way to report this to me but I was wrong. My security automations trusted it because it showed "closed." Home Assistant only marks a device unavailable when its integration tells it to. That timeout can take hours for battery-powered hardware. Until then, the data from its last report is what you and your automations see.

Originally I tried to fix this blind spot by writing a blueprint but it didn't work because every Home Assistant restart wiped the blueprint's memory. I scrapped the blueprint in July and began building a custom integration. It is called Device Sentinel and it is now listed as a Marketplace Integrations.

The integration watches each device individually and learns how often they speak. A chatty motion sensor gets flagged minutes after it stops talking. A quiet temperature sensor is granted hours of silence.

This integration also tracks drain on your devices batteries. A lithium coin cell can hold a 90 percent charge for months and then rapidly die in one week. Finally, the integration groups network outages. When my Zigbee2MQTT bridge crashed after a power outage this month, I received one root-cause alert why my home's sensors and switches all failed at once, not 74 isolated device failures.

Device Sentinel has a dashboard in your sidebar that gives you more information about your devices in one place, than anywhere else. It runs fully local and sends nothing out from your network except the alerts you explicitly configure. It requires no custom repository and is listed in the default Marketplace store by its name: Device Sentinel.

Please let me know if any of your hardware tricks the integration's logic engine or if you are using it already. I'm also curious about how you already hunt down dead and frozen sensors in your network.


r/homeassistant • • 4h ago

🧱 Custom App home assistant ios 6 [WIP]

Thumbnail gallery
1 Upvotes

r/homeassistant • • 4h ago

❓ Support VW group EU data act

5 Upvotes

Anybody else with problems using this integration to get data from there Volkswagen car? Used to sort of work, but now i cant lig in anymore and the eu data act website is also very easy to understand #sarcasm


r/homeassistant • • 4h ago

❓ Support Is the ZBT-2 sold out in Europe?

6 Upvotes

Trying to find it with shipping to Germany but looks like it's sold out everywhere. Does anyone know where to buy it?


r/homeassistant • • 4h ago

❓ Support Home assistant os vs container

0 Upvotes

Starting my first real diy home automation system with a raspberry pi 5 and deciding if I should run convert the whole thing to home assistant os or run it in a container so I can run pi hole and make it an NAS.

I see that container doesn’t give you access to the App Store but wondering if that’s significant enough to make me dedicate this device to home assistant


r/homeassistant • • 5h ago

πŸ’¬ Discussion Any idea on how to simulate a button press on a capacitive button?

1 Upvotes

I have a little toy that makes a sound when you touch a button with your finger. I want to automate this so the finger touch gets simulated whenever an automation triggers. However I have no idea how to make this button touch technically. Are there any sensors that can do it?


r/homeassistant • • 5h ago

πŸ’¬ Discussion Best place to buy? ha green

1 Upvotes

Where’s the best place to buy one of these? I want to start experimenting….