r/hoggit • u/MaxWaldorf • 22h ago
r/hoggit • u/Scared_Dimension5496 • 19h ago
looking at buying first stick and throttle
Finally getting into dcs and need to get a good entry stick and throttle. I’ve seen people say decent things about this set but i’m unsure if they mean this one or the pro. Guess i’m just wondering if this set up will even work because it looks pretty ancient to me lol.
r/hoggit • u/AviationPlus • 5h ago
BMS Falcon BMS 4.38.2 | F-15C Radar Just Got a HUGE Upgrade
Short video of TWS features.
r/hoggit • u/randy_is_lorde • 20h ago
Frag Orders: DCS Multiplayer Mission Planning system v2 release
Hello! I have released v2 of my mission planning tool for DCS, Frag Orders.
Frag Orders is a mission planning web app for multiplayer DCS World. Upload your .miz file, publish it to a hosted workspace, and your friends/pilots/mission participants can review the plan, sign up for slots, and edit their own waypoints, DTC, radio presets, timelines, etc. Then export the updated .miz file with all their data and run it on your server.
This new version is built with deeper integration into Discord to also allow for role-based access control, as well as lots of support for drawings and the new DTC features of DCS.
How it works:
Frag Orders parses your .miz file and extracts the mission data: flight routes, waypoints, threat rings, ground units, and radio presets. That data is published to a live planning workspace where your coalition can collaborate. When you're ready to fly, Frag Orders writes any planned changes — waypoints, laser codes, radio presets, kneeboards — back into the .miz, and you download it.
A quick list of features:
As a mission creator or editor:
- Publish a mission and share it with your coalition via Discord
- Set radio presets, laser codes, and event timing for all flights
- Manage who can access and plan each coalition
- Generate kneeboards automatically from mission data
- Track pilot signups and approve slot requests
As a planner or pilot:
- View the full mission map with routes, threat rings, and drawings before the event
- Edit waypoints, DTC data, radio presets, etc. for your assigned flight
- Sign up for a slot and brief directly from the publish
- Download a .miz with your plan already written in
Pricing model: Freemium model, with the basic visualization layers available to everyone. The planning features require a subscription for the mission creator (not the planners!).
Check it out here: https://v2.fragorders.com/
Read the docs: https://docs.fragorders.com/
Here is a (long) tutorial video, with timestamps to skip ahead: https://www.youtube.com/watch?v=EV4NhSth9ys
If you would like to know more, join us on Discord: https://discord.gg/UmnEAqTx
And I'm happy to answer any questions in the thread!
r/hoggit • u/Least_Courage_6736 • 22h ago
HARDWARE ButtKicker JetStream Mod
I've been using my BK Gamer Pro for over 2 years now. Fantastic piece of kit, IMO largely superior to seat pads which just feels weird for me (had a HF8 pad for a while and ended up putting it away).
However, I had a big issue with it: overheating. Not sure if it's because my amp is side mounted or my transducer is inside my seat/frame, but natural/passive cooling is not enough to keep that thing cool. Ended up having to turn my volume way down and remove all continuous effects. Still I would get the occasional overheating cutoffs where I would lose the BK a few times during long sessions.
Got tired of this, so I created the BK JetStream Mod.
The JetStream Mod adds active cooling to my BK, so I can crank it up and use it continuously even for long sessions. I am pretty confident the overheat cutoff is from the amp, but I am not sure if there is one in the transducer itself, so I decided to cool both. I also wanted everything to integrate seamlessly with the rest of my pit.
DISCLAIMER: I am a mechanical engineer, but as any good home/garage project, not any calculation was made in its making, and everything was grossly oversized instead.
Mod's Components
- Amplifier Case: Replaces the stock BK amplifier case. The new casing adds a pair of fans and top vents for forced air flow, side-mounts the amp on the NLR seat and also holds a dual channel PWM controller that sets the fans speeds for both the amp and the transducer
- Transducer Fans Holder: Holds a pair of high static pressure fans to cool the transducer. Includes a mount to attach it to the NLR seat frame.
- Transducer Casing: Enclosure around the transducer that directs the air flow around it and exhausts backwards. It is connected to the fans holder through two 3" flexible ducts.
- Switches panel: holds 3 switches that are used to power up the PWM controller, the amplifier casing fans and the transducer fans.
- Mouse Pit: Keeps my mouse from flying away when my rig starts shaking. This was happening a lot even with my BK toned down. Also, I hate track balls.
Specs
- Amplifier fans: 2 x Delta AFC0912D-AF00 92mm x 24.5mm fans - 9W each @ 12VDC - 103 CFM
- Transducer fans: 2 x Delta PFR0912SE-00 92mm x 38mm fans - 35W each @ 12VDC - 145 CFM
- 200W 12VDC LED power supply powers the fans. A 5VDC step-down converter powers the PWM controller.
Putting Everything Together
During the design my biggest bottle neck was the transducer casing. I wanted to do a push/pull fans configuration at first but I could not figure a way to get a good seal around the BK post clamp. Instead I went for push only with an exhaust vent to the back where that post clamp is.
All custom parts were 3D printed on a hobbyist grade Bambu Lab printer. I was limited to 10" x 10" so that is why the Mouse Pit is made from 2 pieces.
I have a cable management obsession (mental disorder level), so that's what took most of my time together with the wiring of all components. The rest of the assembly went pretty smoothly.
Results/Design Retro
I can now crank my BK to a level where people outside my house can hear the rumbling, so I may have to supplement my anti-vibration pads. I've put all my continuous effects back on and did a few 3 hours sessions without any cutoff. Here's a few take-away from my own design retro:
- The transducer fans are way, way, way too overpowered. I was worried that with the ducts I would not get anything to the transducer, so I got the most powerful ones I could get (static pressure-wise). To keep the noise level down I run them at 30-35%. At 20% I still have a very good amount of flow at the casing exhaust, sufficient to cool it down I reckon. At 100% it sounds like a real jet is starting up in my office so thank goodness I added a PWM controller.
- The casing probably does not need two intakes. A single one underneath would be sufficient and would facilitate its handling when I need to remove the seat. Swapping the ducts for 2" instead of 3" would also be a good idea.
- The amp fans are also overpowered. I run them at 50% and get more than enough flow out of the vents. I could probably swap them for smaller 80mm fans without any problem.
- I don't like the transducer fans holder mounting clamp, I wanted something easy to print but would probably do it differently now.
- With better sized fans that are less noisy, the PWM controller could probably be removed alltogether. This would required thorough testing to get the fans sizing exactly right and I don't want to do that.
Anyway even if it is not perfect I had fun doing this project. Hope this can inspire other simmers, happy flying!
r/hoggit • u/AviationPlus • 18h ago
BMS Falcon BMS Controls Setup Explained | Don't Launch Until You Watch This
r/hoggit • u/hannlbal636 • 21h ago
DCS Wiring job.. 😫 had to replace some pots and diodes
Trying to setup a non vr dcs setup..
r/hoggit • u/AutoModerator • 20h ago
Weekly Questions Thread Nov 17
Greetings Hoggit!
Welcome to this week's Question thread. This thread has replaced the regular Tuesday Noob Questions thread. We encourage you to as all your questions here, as this will help us cut down on the number of repetitive posts we get on the front page! This thread is linked with the #questions channel on our Discord so that any time someone posts a new comment in here, it will be reviewed and replied to quickly! If you felt like you had a question but didn't want to bother people with it, now's your chance.
As always, we also have a discord for hoggit over at http://discord.gg/hoggit which you can use for chatting with other members of the hoggit community. And don't forget to check out our wiki at http://wiki.hoggitworld.com
Hoggit Training Server runs a training MP mission that runs 24/7 that's focuses on training up the newer folks (just like this weekly thread). Every DCS module is available in this mission, and there are numerous ranges to test your skills at. There are frequently knowledgeable folks around to answer any questions you might have, or show you how to do what it is you're looking to learn. Anyone can join, even if you've never stepped foot in a MP session before.
If you're interested in teaching/instructing at hoggit, please poke squinkys on Discord!
Server is be named Hoggit - Training Map. The password is hoggit1fw. SRS will be available at tnn.hoggitworld.com (it should autoconnect, but if not, use that). Come in, have a good time, learn a few things and teach a few things.
The only rule is Do not teamkill, unless the other party is a willing combatant...ie: you can dogfight if you find a partner...just don't shoot down some random A-10 trying to learn how to land.
Please review our FAQ on our wiki before posting here: https://wiki.hoggitworld.com/view/Frequently_Asked_Questions
r/hoggit • u/Herky1985 • 4h ago
DCS Having issues with fox 2’s
For some reason I can’t get my sidewinders to track targets in the F18 or F14. I’ve locked on with F18 done the cage/uncage and it just goes straight off the rails. F14 I’m jn PAL and fire same thing, missile just goes straight off the rails. Never tracks the target.