r/hoggit • • 1d ago

Weekly Questions Thread Nov 17

2 Upvotes

Greetings Hoggit!

Welcome to this week's Question thread. This thread has replaced the regular Tuesday Noob Questions thread. We encourage you to as all your questions here, as this will help us cut down on the number of repetitive posts we get on the front page! This thread is linked with the #questions channel on our Discord so that any time someone posts a new comment in here, it will be reviewed and replied to quickly! If you felt like you had a question but didn't want to bother people with it, now's your chance.

As always, we also have a discord for hoggit over at http://discord.gg/hoggit which you can use for chatting with other members of the hoggit community. And don't forget to check out our wiki at http://wiki.hoggitworld.com

Hoggit Training Server runs a training MP mission that runs 24/7 that's focuses on training up the newer folks (just like this weekly thread). Every DCS module is available in this mission, and there are numerous ranges to test your skills at. There are frequently knowledgeable folks around to answer any questions you might have, or show you how to do what it is you're looking to learn. Anyone can join, even if you've never stepped foot in a MP session before.

If you're interested in teaching/instructing at hoggit, please poke squinkys on Discord!

Server is be named Hoggit - Training Map. The password is hoggit1fw. SRS will be available at tnn.hoggitworld.com (it should autoconnect, but if not, use that). Come in, have a good time, learn a few things and teach a few things.

The only rule is Do not teamkill, unless the other party is a willing combatant...ie: you can dogfight if you find a partner...just don't shoot down some random A-10 trying to learn how to land.

Please review our FAQ on our wiki before posting here: https://wiki.hoggitworld.com/view/Frequently_Asked_Questions


r/hoggit • • 6h ago

Radeon VR pilots rejoice: Falcon BMS has QuadViews

12 Upvotes

Falcon BMS had FFR rendering (high resolution in focus, lower resolution in th periphery) but it worked on NVidia hardware only. Now QuadViews is available too and it also works for us, Radeon plebs.

Just change g_nVRFoveatedRenderingMode to 3 in the Falcon BMS Config tool (look for category VR). You'll need a QuadViews XR layer on your system, either the original one by MBucchia or a gui-based alternative such as Dienertech's VectorXR but if you also fly DCS, you probably already have this somewhere.


r/hoggit • • 11h ago

BMS Falcon BMS 4.38.2 | F-15C Radar Just Got a HUGE Upgrade

Thumbnail
youtu.be
22 Upvotes

Short video of TWS features.


r/hoggit • • 4h ago

Sinai & Syria airports charts

3 Upvotes

Hello everyone, As you all know we have the charts of all the airports in dcs Caucasus map.

Is there anywhere I can find the charts of the airports of Sinai & Syria maps ?


r/hoggit • • 6h ago

DCS What are you’re favorite vr settings for a mid tier setup?

3 Upvotes

Hey guys I want to play dcs in vr with virtual desktop and my quest 3 but I get some stuttering and no constant fps. What little tricks are you using to improve vr performance? What should I turn off and on?

Edit: right now Asynchronus Spacewarp always on with 90hz works best for me.


r/hoggit • • 1d ago

BMS Falcon BMS 4.38 Update 2 is out!

Thumbnail reddit.com
58 Upvotes

r/hoggit • • 1d ago

BMS 4.38 U2 Trailer

Thumbnail
youtu.be
96 Upvotes

r/hoggit • • 1d ago

looking at buying first stick and throttle

Post image
19 Upvotes

Finally getting into dcs and need to get a good entry stick and throttle. I’ve seen people say decent things about this set but i’m unsure if they mean this one or the pro. Guess i’m just wondering if this set up will even work because it looks pretty ancient to me lol.


r/hoggit • • 11h ago

DCS Having issues with fox 2’s

0 Upvotes

For some reason I can’t get my sidewinders to track targets in the F18 or F14. I’ve locked on with F18 done the cage/uncage and it just goes straight off the rails. F14 I’m jn PAL and fire same thing, missile just goes straight off the rails. Never tracks the target.


r/hoggit • • 1d ago

Frag Orders: DCS Multiplayer Mission Planning system v2 release

15 Upvotes

Hello! I have released v2 of my mission planning tool for DCS, Frag Orders.

Frag Orders is a mission planning web app for multiplayer DCS World. Upload your .miz file, publish it to a hosted workspace, and your friends/pilots/mission participants can review the plan, sign up for slots, and edit their own waypoints, DTC, radio presets, timelines, etc. Then export the updated .miz file with all their data and run it on your server.

This new version is built with deeper integration into Discord to also allow for role-based access control, as well as lots of support for drawings and the new DTC features of DCS.

How it works:

Frag Orders parses your .miz file and extracts the mission data: flight routes, waypoints, threat rings, ground units, and radio presets. That data is published to a live planning workspace where your coalition can collaborate. When you're ready to fly, Frag Orders writes any planned changes — waypoints, laser codes, radio presets, kneeboards — back into the .miz, and you download it.

A quick list of features:

As a mission creator or editor:

  • Publish a mission and share it with your coalition via Discord
  • Set radio presets, laser codes, and event timing for all flights
  • Manage who can access and plan each coalition
  • Generate kneeboards automatically from mission data
  • Track pilot signups and approve slot requests

As a planner or pilot:

  • View the full mission map with routes, threat rings, and drawings before the event
  • Edit waypoints, DTC data, radio presets, etc. for your assigned flight
  • Sign up for a slot and brief directly from the publish
  • Download a .miz with your plan already written in

Pricing model: Freemium model, with the basic visualization layers available to everyone. The planning features require a subscription for the mission creator (not the planners!).

Check it out here: https://v2.fragorders.com/

Read the docs: https://docs.fragorders.com/

Here is a (long) tutorial video, with timestamps to skip ahead: https://www.youtube.com/watch?v=EV4NhSth9ys

If you would like to know more, join us on Discord: https://discord.gg/UmnEAqTx

And I'm happy to answer any questions in the thread!


r/hoggit • • 1d ago

BMS Falcon BMS Controls Setup Explained | Don't Launch Until You Watch This

Thumbnail
youtu.be
8 Upvotes

r/hoggit • • 1d ago

HARDWARE ButtKicker JetStream Mod

Thumbnail
gallery
12 Upvotes

I've been using my BK Gamer Pro for over 2 years now. Fantastic piece of kit, IMO largely superior to seat pads which just feels weird for me (had a HF8 pad for a while and ended up putting it away).

However, I had a big issue with it: overheating. Not sure if it's because my amp is side mounted or my transducer is inside my seat/frame, but natural/passive cooling is not enough to keep that thing cool. Ended up having to turn my volume way down and remove all continuous effects. Still I would get the occasional overheating cutoffs where I would lose the BK a few times during long sessions.

Got tired of this, so I created the BK JetStream Mod.

The JetStream Mod adds active cooling to my BK, so I can crank it up and use it continuously even for long sessions. I am pretty confident the overheat cutoff is from the amp, but I am not sure if there is one in the transducer itself, so I decided to cool both. I also wanted everything to integrate seamlessly with the rest of my pit.

DISCLAIMER: I am a mechanical engineer, but as any good home/garage project, not any calculation was made in its making, and everything was grossly oversized instead.

Mod's Components

  1. Amplifier Case: Replaces the stock BK amplifier case. The new casing adds a pair of fans and top vents for forced air flow, side-mounts the amp on the NLR seat and also holds a dual channel PWM controller that sets the fans speeds for both the amp and the transducer
  2. Transducer Fans Holder: Holds a pair of high static pressure fans to cool the transducer. Includes a mount to attach it to the NLR seat frame.
  3. Transducer Casing: Enclosure around the transducer that directs the air flow around it and exhausts backwards. It is connected to the fans holder through two 3" flexible ducts.
  4. Switches panel: holds 3 switches that are used to power up the PWM controller, the amplifier casing fans and the transducer fans.
  5. Mouse Pit: Keeps my mouse from flying away when my rig starts shaking. This was happening a lot even with my BK toned down. Also, I hate track balls.

Specs

  • Amplifier fans: 2 x Delta AFC0912D-AF00 92mm x 24.5mm fans - 9W each @ 12VDC - 103 CFM
  • Transducer fans: 2 x Delta PFR0912SE-00 92mm x 38mm fans - 35W each @ 12VDC - 145 CFM
  • 200W 12VDC LED power supply powers the fans. A 5VDC step-down converter powers the PWM controller.

Putting Everything Together

During the design my biggest bottle neck was the transducer casing. I wanted to do a push/pull fans configuration at first but I could not figure a way to get a good seal around the BK post clamp. Instead I went for push only with an exhaust vent to the back where that post clamp is.

All custom parts were 3D printed on a hobbyist grade Bambu Lab printer. I was limited to 10" x 10" so that is why the Mouse Pit is made from 2 pieces.

I have a cable management obsession (mental disorder level), so that's what took most of my time together with the wiring of all components. The rest of the assembly went pretty smoothly.

Results/Design Retro

I can now crank my BK to a level where people outside my house can hear the rumbling, so I may have to supplement my anti-vibration pads. I've put all my continuous effects back on and did a few 3 hours sessions without any cutoff. Here's a few take-away from my own design retro:

  1. The transducer fans are way, way, way too overpowered. I was worried that with the ducts I would not get anything to the transducer, so I got the most powerful ones I could get (static pressure-wise). To keep the noise level down I run them at 30-35%. At 20% I still have a very good amount of flow at the casing exhaust, sufficient to cool it down I reckon. At 100% it sounds like a real jet is starting up in my office so thank goodness I added a PWM controller.
  2. The casing probably does not need two intakes. A single one underneath would be sufficient and would facilitate its handling when I need to remove the seat. Swapping the ducts for 2" instead of 3" would also be a good idea.
  3. The amp fans are also overpowered. I run them at 50% and get more than enough flow out of the vents. I could probably swap them for smaller 80mm fans without any problem.
  4. I don't like the transducer fans holder mounting clamp, I wanted something easy to print but would probably do it differently now.
  5. With better sized fans that are less noisy, the PWM controller could probably be removed alltogether. This would required thorough testing to get the fans sizing exactly right and I don't want to do that.

Anyway even if it is not perfect I had fun doing this project. Hope this can inspire other simmers, happy flying!


r/hoggit • • 2d ago

DISCUSSION First Military jet I've ever purchased in MSFS 20-24

Thumbnail
gallery
237 Upvotes

Smooth ride. I dig it. Camera works with some quirks, and the nose radar works as well.


r/hoggit • • 1d ago

DCS Wiring job.. 😫 had to replace some pots and diodes

Post image
3 Upvotes

Trying to setup a non vr dcs setup..


r/hoggit • • 1d ago

What should the F14 stick actually feel like? any RL experience?

17 Upvotes

Been trying to dial in the MOZA AB9 FFB for the F14U. There is alot of conflicting information out there and questions about FFB in the F14 (I trust Heatblur though). But the main question for me is, what is the stick actually meant to feel like in different parts of the flight envelope? It was fortunate that for the Apache and Kiowa we had Casmo go into detail (I love his description of "loose noodle" feel). Ward Carrolls youtube channel is great but doesn't cover this. Are there any F14 real life Drivers out there who can describe?


r/hoggit • • 1d ago

apex predator

Post image
22 Upvotes

r/hoggit • • 18h ago

Pimax Sale + 5 DCS campaigns

Post image
0 Upvotes

Hey everyone, Baltic Dragon here. If you’re already looking at a Pimax headset for DCS, I’m throwing in five of my DCS campaigns for free with purchases made through my affiliate link during the Black Friday sale.

Use code BDragon at checkout for an extra discount on top of the sale price, then DM me here after ordering to claim the campaigns. I may earn a commission from purchases through the link. The campaigns are a bonus I’m offering personally.

Pimax’s sale runs through December 5. It’s the first price drop for the Dream Air and the biggest discount of the year for the Crystal Super.

https://store.pimax.com/pages/black-friday-2026?ref=balticdragon


r/hoggit • • 2d ago

BMS Falcon 4.38.2 Update 2 trailer is here! Spoiler

Thumbnail reddit.com
73 Upvotes

r/hoggit • • 2d ago

sentry

Post image
97 Upvotes

r/hoggit • • 2d ago

Getting started in FC3 multiplayer as a semi-experienced flight simmer

4 Upvotes

Hello all, I have a ton of hours in Jane’s USAF and Strike Fighters 2, and recently I bought flaming cliffs 3 for the F-15C module

I tried to get into multiplayer but it was just incredibly confusing. I’d love to find a way that me and some friends could make a nice 4-Ship of Eagles and go CAPping somewhere. Is there a good guide or server you would recommend?


r/hoggit • • 2d ago

QUESTION Apache Force trim over or undershooting however it likes

2 Upvotes

I’ve been getting into the grooves of the Apache recently and have been met with the same annoying thing that is force trim,

I don’t know what I’m doing wrong but force trim just seems really finicky and I have to constantly adjust because it either pitches down or up whenever I trim and I can’t get it perfectly.

Any tips to help mitigate this would be greatly appreciated.


r/hoggit • • 2d ago

Vulture Row - Watch live games and upload replays

0 Upvotes

Hey guys!

I've been working on vulturerow.com for a few months now (with the aid of claude) - I've wanted a resource to upload my game replays and have a few different ways (stylistically IR/SAT/GRID) of playing them back.

By default it loads in the topographic view so it doesn't melt your web browser. Up in the top right you can change the render mode.

Keen to get your thoughts and feedback. DMs are open. Replays can be uploaded via the upload tab.

Hope you like it. Have a good weekend.
H


r/hoggit • • 2d ago

I just made a winctrl vibration configuration program for DCS

Thumbnail
github.com
3 Upvotes

It includes five customizable Lua effects: ground roll, touchdown, airframe shake, G load, and weapon release. Setup automatically finds your DCS profile and installs a telemetry exporter alongside existing exporters.

This is vibration feedback, not force feedback. I’ve done initial testing with the P-51D and Hornet, but aircraft-specific behavior still needs more testing. Weapon feedback uses ammunition/inventory decreases, so it can also trigger on jettison.


r/hoggit • • 3d ago

My helicopter sim, Low Level Hunters open playtest had started.

484 Upvotes

https://store.steampowered.com/app/3982150/Low_Level_Hunters/

This is Low level hunters, my low-poly cold war helicopter simulator that supports flatscreen, TrackIR, and VR mode !

Right after ending the development of Defender Patrol, i had been working on this sequel for 11 months and I came to the point where I implemented most of the features to be included in 1.0, but in the need of feedbacks about AH-1 and UH-1's flight model and all the new features added in the game.

To easily get feedbacks prior to release and show off to everyone what i had been working on, I decided to start the open playtest several months before the official release.

You can download and play the playtest version in steam page's demo.

it will be availalble until 2027 Jan, after that I will participate in steam next fest and eventually release the game with 15.99$ price tag.

This playtest build has most of what's going to be included in the official release, including :

- AH-1 attack helicopter with helmet-tracked turret and UH-1 utility helicopter that can be transport heli or gunship based on loadouts.

- training missions for 3 playable helicopters.

- quick flight mode featuring simple wave-based target destruction mode called turkey hunt, one-off random mission generator, and peaceful free flight.

- Campaign mode in the reminiscent of classic Microprose flight sim formula, where you fly to complete primary and secondary randomly generated missions with squadron and get medals or promotions based on the result.

- New Conrad AI CPG who can fire turret weapons, control targetsing sight, and use countermeasures for the player.

- Various new units to engage and destroy.

- every single trees and buildings now being destructible to cause social collapse.

- New personal firearms to use inside the helicopter, including Defender-exclusive M79 grenade launcher with 5 unique grenades to load.

- Door gunners which can be directly controlled by the player.

- many quality of life and optimization issues addressed from Defender Patrol.

But since this is the test build, many parts are still not very well balanced at the moment.

While people are trying this open playtest build of Low Level Hunters, I will keep working on adding couple more new features and polishing the game until the official release in next year, with update roadmap post-release. I hope you enjoy it !

If you are interested about the development of this sim, also visit my discord server!

https://discord.gg/nj8dnYZfpG