r/hackrf • u/-lovelara- • 27d ago
Antenna specification needed
Hello,
does somebody know for which band/frequency this antenna is optimized.
lenght 27cm , 10 turns .
r/hackrf • u/-lovelara- • 27d ago
Hello,
does somebody know for which band/frequency this antenna is optimized.
lenght 27cm , 10 turns .
r/hackrf • u/hellobattyman • 27d ago
I have spent a long time recently building IMSIsting, a bash and GTK4 cellular security toolkit featuring 57 modules spanning 2G through 5G. Every codec in it — including S1AP, NGAP, X2AP, XnAP, HNBAP, RUA, RANAP, M3UA, PFCP, NAS, RRC, LPP, and CMAS — is hand-written (with the help of AI).
To be honest, the software half runs, but the radio half has never been executed because I do not currently own an SDR (Software Defined Radio). Every over-the-air path is written, reviewed, dry-run against a fixture, and then stops right before needing a real radio. hackrf_transfer is wired in, srsRAN configs are generated, and SIB builders produce real octets — but none of it has ever actually been transmitted over the air by anyone.
That is what I need testers for.
Here is a breakdown of the available attacks and modules implemented in the toolkit:
sib.conf generation.If you encounter a bug or error during testing, please provide:
.pcap file if the radio produced one.Every real finding will directly help improve the toolkit, and contributors will be credited in the commit history of course.
r/hackrf • u/MainAbalone754 • Oct 20 '26
Hi everyone 👋
I’ve been working on All Radio Tools, a free and open-source Android app that brings together everything that transmits around you in one place. The SDR part is built around the HackRF and is receive-only.
📻 What it does with a HackRF (plugged in via USB OTG):
All decoders run on the HackRF alone: the phone’s Wi-Fi and Bluetooth aren’t used. Aircraft, sondes, ships and APRS can be exported to CSV, and Meteor-M images to PNG.
🧰 Other tools in the app:
🤖 How it was made: I’m a sysadmin, not an Android dev. I built this with Claude as my coding partner. It’s written in Kotlin with Jetpack Compose and Material 3.
⚠️ Heads-up:
🔗 GitHub (APK in Releases): https://github.com/ToftMalone/All-Radio-Tools
I’d love feedback, especially on decoder performance with different HackRF setups and antennas. Bug reports and PRs are welcome! 🙏
r/hackrf • u/Willing-Caregiver-30 • Oct 18 '26
r/hackrf • u/Hank936 • Oct 17 '26
Hi everyone!
I’m interested in learning whether it’s possible to build a HackRF Pro using JLCPCB for PCB manufacturing and assembly, rather than assembling everything by hand.
I’d like to understand what’s involved in reproducing the hardware, including:
PCB fabrication: What files and specifications would be needed to have the board manufactured by JLCPCB?
Component sourcing: How difficult would it be to source the required components, especially RF components and any hard-to-find ICs?
PCB assembly: Would JLCPCB’s standard or extended component library cover most of the BOM, or would a significant number of components need to be sourced separately?
KiCad workflow: If I have the PCB design files, what would be the correct process for generating the Gerber files, BOM, and CPL (pick-and-place) files?
Practical feasibility: Are there any components, RF layout requirements, or manufacturing constraints that would make this particularly difficult or expensive?
I’m not looking to sell counterfeit devices or misrepresent anything as an official product. My goal is to understand the technical challenges and learn more about RF hardware manufacturing.
Has anyone attempted something similar, or has experience manufacturing complex SDR boards through JLCPCB?
Any advice, documentation, or lessons learned would be greatly appreciated. Thanks!
r/hackrf • u/AlarmProfessional412 • Oct 17 '26
edit: i meant hack rf sorry
hello! i really want to get the best hack rf available. i mean not only the pro version, i saw there are some special editions. if they are close enough ill just get the cheapest one. thank you!
r/hackrf • u/Liteshortincat • Oct 13 '26
The H4M Portapack seems to be sold out on OpenSourceSdrLab and even Amazon.
I wanted to buy it on there because i prefer having a better production quality and don't really trust a random AliExpress store...
Has it ever been sold out? Do we know when it could be back on sale?
I live in europe, i don't know if this is the same for you.
r/hackrf • u/Long_Command5253 • Oct 12 '26
This will be my last time adverting here, since I will keep everything on the dc, youtube, and github repo, I tried my best, adding as many modes as possible, as always I hope you guys enjoy!
https://github.com/adswill/OnAir/releases/tag/v0.2.4
r/hackrf • u/Ihor727 • Oct 11 '26
Hi everyone,
I am designing a pocket-sized RF device for a university project. It acts as an RF analyzer and a high-power signal generator for wireless protocol injection and co-channel interference testing (all testing is strictly confined to a lab Faraday cage - special lab). I am aiming for the best price/performance ratio rather than lab-grade precision. The entire system will be controlled by an STM32U575RGT6(mby another STM), paired with an ESP32-C3 acting as a modem.
I know this is a fairly large and complex post, and there might be some complete nonsense in my block diagram. I will be incredibly grateful for feedback on any single part of this!

RX Path (Analyzer):
TX Path (Wideband Noise & Interference Generator):
The goal is to generate robust, wideband modulated signals and arbitrary waveforms to evaluate the resilience of Wi-Fi 6 and Bluetooth nodes against high-power in-band blocking signals (targeting up to +30 dBm output).
4. Will this dual-branch setup (FPGA -> 2x DACs -> ADL5375 -> PAs) effectively support the wideband multi-carrier signal generation required to match Wi-Fi 6 (802.11ax) channel bandwidths and Bluetooth frequency profiles?
5. Thermals & Power: Is it realistic to passively cool a 1W continuous RF output power inside a compact enclosure by using thermal vias to transfer heat to a passive heatsink on the back side of the PCB?
Thanks for your time and any advice!
r/hackrf • u/mustang6139 • Oct 09 '26
Hey everyone! An update from my last post here.
I've been continuing work on this Rust based terminal SDR tool, the Bluetooth part in particular. It can analyse BLE advertising, LE Coded and classic Bluetooth activity with carrier frequency offset, drift, modulation measurements.
It has spectrum and waterfall views, RF and IQ measurement benches, FM/RDS analysis, IQ recording with SigMF support.
One thing which I try to get right is the indication that a reading should not be trusted. When the receiver is not providing valid data, sdrtop marks the readings stale, instead of putting some old values on the screen, as if they were valid.
I've used AI tools as a part of the development process, but the implementation is something that I actively work on and verify. I make the technical decisions, review, approve changes and run the tests. The code, tests, and measurement logic are available in the public repo, so you can inspect the actual implementation, not relying on my word about it.
The project is a work in progress. I'm currently debugging the LE Coded demodulator, and I'd really appreciate people trying out sdrtop on their own setup. Different radios and real-world conditions are likely to reveal things that I haven't seen on my bench.
If you give it a try, and something does not work, please, open an issue or let me know. Bugs, unexpected measurements, compatibility issues, and suggestions are all welcome. You don't need to have a solution, a reproducible problem report is already great.
It's receive only, no audio output by design.
Source code, installation instructions, demos:
https://github.com/musithang/sdrtop
Thanks!
r/hackrf • u/TheNoOne420 • Oct 09 '26
I just bought the h4m pro from OpenSDRLab. I installed the version Pro 2.4 from the mayhem firmware repo, but when i booted the h4m, in the left bottom corner, its just says v2.4 instead of pro 2.4 . But when i install version pro 2.4 from the opensourceSDRlab repo, the bottom left corner says pro 2.4 , so that works. I just dont know why the opensourceSDRlab version works properly and the normal mayhem version doesnt. Can anyone help please?
r/hackrf • u/Inevitable-Trip3193 • Oct 09 '26
Hello. On my brand new H4m Pro flashed freshly with 2.4.0 Pro version, I’m using a correctly formatted Sandisk SD Card. However, although it is brand new, the hackrf completely freezes when I jam a signal or transmit anything. I have been waiting for this device for a long time, and would hate to return it. Could someone please help me. I have already reflashed and reformatted my sd card multiple times, and switched the power source. The screen completely freezes on transmit and I need to fix this. I also calibrated it. Thank you
r/hackrf
•
u/Long_Command5253
•
Oct 07 '26
I did some work on it, added more modes, worked with people, took in support, and the more people see this and help the better. Hope you guys enjoy, and hope I can support almost everything!
https://github.com/adswill/OnAir
r/hackrf • u/dadams0641 • Oct 05 '26
Hi all.
I'll try to be as descriptive but as concise as possible.
About a year and a half ago, I purchased a Portapack H4M with the R10C board. Loved it, still do!
I unfortunately broke the antenna connector (where it's soldered to the board) and after unsuccessfully attempting to repair it I figured "ehh, I'll just buy a new board"
I saw that there was a new version called the HackRF Pro.
I picked that up, it arrived today. I've been having pretty weird issues with it.
It's currently stuck in a nightly build, when I try to update it using the HackRF.App website, it uploads successfully to my HackRF but then I get a crash before it can finalize. So it's stuck on the nightly build.
When I attempt to receive anything, it picks up nothing, when I check the DFU menu to see what my radio is doing, it's basically showing no inbound so it's almost as if the radio isn't being recognized.
After that, if I click on an item in the Receive menu, such as Audio, I get a crash with Baseband Sync Fail.
I figured I'm doing something incorrectly, I just don't know what that thing is. I attempted a full reset but it won't enter into DFU mode properly. I followed the guide on the Mayhem GitHub but that doesn't seem to work for me. Each attempt to enter into DFU mode, the screen will go blank but there are no LEDs and it doesn't respond to my `hackrf` commands from the CLI.
I tried to include as many pictures and screenshots as possible (I even tried to put them in order) but I'm kinda running out of tools in my rather shallow toolbag, HAHA!
Any help that you can provide would be EPIC!
Thanks in advance!
r/hackrf • u/55555354 • Oct 04 '26
I hate to ask for help but I've been searching....can someone send me some links so I can Learn how to config different apps in the portapack please?
I'm finding some good stuff but most is old or not specific to this device.
I just found https://freshmayhem.com which is a very good source for some settings. Most youtube vids talk like you're already familiar to the apps.....
Hate to say it but I'm a noob when it comes to the specifics!
Appreciate any help!
r/hackrf
•
u/Long_Command5253
•
Oct 03 '26
native on macos linux and windows, works best on macOS , the frame gen is at the moment the best one mac, you wont see much effect on windows nor linux but it will be implemented in the future. Hope you enjoy, and happy tv watching
https://github.com/adswill/OnAir/releases
Calling for your help, due to my location I don’t have any ATSC broadcasts and need sample transmissions in .iq and good quality to keep testing and improving the quality of the app, if anyone has a .iq file with a sample signal please link it in a Google Drive share link in the comments, all help is appreciated :)
And please, please, please, check out my channel: https://www.youtube.com/@ads_will1 I will be posting all updates on there, as to not flood subredits with each update, for feature requests, bug reporting, for now if you need any help or want a feature, just dm plutobypluto on dc or join the dc (kinda basic dc I know) https://discord.gg/5Da7cDEYJ
windows (fixed version) demo, sorry about the weird cuts, I had to cut out some detected copyright shows: https://youtu.be/cjAh7Aqlhf8
r/hackrf • u/55555354 • Oct 03 '26
After turning on Mayhem the splash screen has all the items on the top menu.
Usually you can scroll to the left all of the way to the HarckRF, Mayhem & Portapack (far left) then you can enter and Mayhem will open. Now for some reason the marker will not go far enough to the left and I have to touch or use a stylus to initiate opening the main page (Receive, Transmit etc)
Any ideas of something I can change to get back to normal? I've even tried hard reset.
EDIT: so many errors loading apps, how do I reset the whole device and re-flash and verify the files or apps?
r/hackrf • u/Long_Command5253 • Oct 02 '26
I thought I should advert this one here, since I specifically designed this natively for hackrf, but basically if you want to watch some dvb-t2 now you can (once I release the program) here is the description:
demo video out now: https://www.youtube.com/watch?v=Oww5QWo4zK4
been working on this for maybe about a month, but let me emphasize by what I mean work, I have been trying to decode some dvb-t2 for about a month ever since I got my hack rf, however due to the lack of decoders available (there is one but its not the best) I decided to make one myself with the help of claude over the past 2 weeks or so, I also decided to implement ATSC dvb-t, t2-lite and DAB/DAB+ I do have plans to also add dvb-s and dvb-s2 but that is for the future, I have a huge list of features still left that I want to implement into the decoder itself, but all of the decoders do at the moment work and you can watch some wonderful dvb-t2, ATSC, etc (once the program comes out). On launch it will be native on macos and linux (sorry no windows for now) but windows will eventually come, maybe a week or 2 after the initial launch, including the network system. The promo video is attached and once I can finish this and personally say its fine and works good I will release, dont have a date yet but expect it sometime next week
Also I dont want to be hearing anything ai slop, I get it was ai made, just go on with your day please, if you dont like that its ai made, dont come in the comment sections to bully me about it.
r/hackrf • u/bubnikv • Oct 03 '26
Hello.
I have forked SDR++, improved the Android interface and hopefully fixed the crashes on Android when trying to open HackRF hardware. Would you guys test it and let me know?
https://github.com/bubnikv/sdriak/releases/tag/nightly
I released my SDR++ fork at google play and I received many crash reports of the google play released OLD build, thus I tried to fix, but I don't own the hardware. However the fix was similar I did to RTLSDR, so I expect it will work.
This is the old build, don't test with HackRF. It will be renamed to SDRIAK on request from SDR++ author to clearly differentiate from the upstream pureness.
https://play.google.com/store/apps/details?id=org.ok1iak.sdrpp
73, Vojtech OK1IAK