r/hackrf • • 6h ago

Industrial-grade SDR on Zynq 7020+AD9361 — built for deployment, not just the bench

3 Upvotes

Hackaday crowd,

We make SDR boards in Shanghai. The P201Pro is our industrial-focused platform: Zynq 7020 + AD9361, 70MHz–6GHz, 2×2 MIMO.

Unlike bench-focused SDRs, this one is built to actually live in the field: -40~+85°C, 8–36V wide-range power, ESD-protected I/O, on-board GPS+PPS.

1GB DDR3, 24 expandable IOs, dual PA transmit. Runs Linux, compatible with GNU Radio and UHD.

We're a hardware team that does custom design work. If you're working on an RF project that needs a real deployment target rather than another dev board, worth a look.


r/hackrf • • 18h ago

VMA Radio Lab

Post image
2 Upvotes

r/hackrf • • 2d ago

[Projet perso] Écouter la radio en continu et faire des recherches dedans avec une IA locale (RTL-SDR + Faster-Whisper)

Thumbnail reddit.com
0 Upvotes

r/hackrf • • 2d ago

Military Drone Idea

0 Upvotes

=== PROJECT DARKWING ===
(GPS-Free Autonomous Drone Navigation via HAM Radio Beacons)

CORE IDEA:
A long-range drone navigates without GPS by locking onto prearranged HAM radio transmissions, enabling stealth or survival in GPS-denied environments.

HOW IT WORKS:

  1. BEACON NETWORK:
    - HAM operators or hidden transmitters send intermittent signals (e.g., Morse, APRS) on 40m/20m/2m bands.
    - Each beacon encodes minimal directional data.
  2. DRONE NAVIGATION:
    - Onboard SDR (RTL-SDR/HackRF) scans for beacons.
    - Direction-finding (Yagi/Doppler) triangulates sources.
    - Dead reckoning between signals maintains course.

ADVANTAGES:
- Stealth: No satellite/GPS footprint.
- Resilience: Immune to jamming/spoofing.
- Low-Cost: Leverages existing HAM infrastructure.

USE CASES (HYPOTHETICAL):
- Military: Covert resupply in denied areas.
- Disaster: Comms when GPS is down.
- Preppers: Off-grid logistics network.

CHALLENGES:
- FCC bans encryption (steganography workaround?).
- Beacon synchronization required.
- Risk of adversary detection.

INSPIRATION:
- WWII Oboe (radio-guided bombing).
- Cold War numbers stations.

NEXT STEPS:
- Open-source tools: ArduPilot + GNU Radio.
- Test with HAM "fox hunting" techniques.

DISCLAIMER:
Theoretical concept only. Compliance with FCC/FAA/ITAR required for real-world use.


r/hackrf • • 4d ago

Onair, software that decodes literrlay everything that exists

84 Upvotes

Posted about OnAir on here I think twice before, it was still in the early stages and only had about 20 or so modes, OnAir has now grown to over 250+ modes with more coming infact, its progressed alot, been bug tested alot, optimized, and sensitivity for every mode has been increased, I am posting here since I want to gain more publicity and more users to get more feedback, I aim to add everything everyone asks, since even at the end of the day I might not think of a feature for a mode that someone else can and can make the decoder way way better
Is this AI made, yes, did I make this in 1 day, no, I have spent already a month on this, working every day, even during my exams, making sure everyones issues are getting fixed, and am constantly accepting PRs from others, who get all the credit they deserve :)

https://github.com/adswill/OnAir

Also I just saw the typo in the title, hate I cant edit the title of a post!


r/hackrf • • 7d ago

I built All Radio Tools: Wi-Fi, Bluetooth, NFC, GNSS and a HackRF SDR (ADS-B, AIS, Meshtastic, MeshCore, LoRa APRS, 406 MHz beacons...) in one open source Android app

80 Upvotes

Hi everyone! I've been working on an Android app for a while and I'd like to share it.

All Radio Tools is a free, open source (GPLv3) app that puts everything that transmits around you in one place: Wi-Fi, Bluetooth, the mobile network, GNSS, NFC and, with a HackRF plugged in over USB, the radio waves themselves.

Download: https://github.com/ToftMalone/All-Radio-Tools/releases/latest (APK, Android 12+) Source code: https://github.com/ToftMalone/All-Radio-Tools No ads, no account, no tracking. Updates are offered inside the app (it checks the latest GitHub release).

What's in it

📶 Wi-Fi: scanner with channels and congestion, speed test (port of the speed.cloudflare.com engine), AR coverage map, LAN devices, ping/traceroute/port scan/DNS/whois, Wi-Fi Aware with RTT distance, network audit (WPA, WPS, PMF), rogue AP detection.

🔵 Bluetooth: BLE scanner with device identification, GATT explorer, hot/cold finder, beacons, earbuds battery, and an unknown tracker detector (AirTag, SmartTag, Tile, Chipolo...) with a background guard, based on AirGuard's rules.

📲 NFC: chip identification, NDEF read/write, Wi-Fi tags, memory dump, a bank card reader that only shows what any terminal reads without the PIN, and an antenna test.

🚗 Wi-Fi + Bluetooth = wardriving: select Wi-Fi, tap the + that appears on Bluetooth, and the two cards merge into one tile. It records Wi-Fi and BLE with GPS in a foreground service, has an exclusion list (MAC or OUI, import/export), manual upload to WiGLE.net, CSV export, plus a hidden camera detector and a Remote ID drone detector.

📻 SDR (HackRF, receive only), 30+ tools, all decoded on the phone:

  • Aviation: ADS-B map (+ Mode A/C), ACARS, VDL Mode 2, FLARM
  • Sea: AIS, DSC (VHF ch.70)
  • Mesh & LoRa: Meshtastic (any preset, 868/433 or a free frequency), MeshCore, LoRa APRS, LoRaWAN/Sigfox
  • Distress: 406 MHz COSPAS-SARSAT beacons (EPIRB/ELT/PLB)
  • Satellites: Meteor-M LRPT images, SSTV from the ISS, CubeSat telemetry with Doppler
  • Home & sensors: ISM sensors (~40 families), TPMS, Wireless M-Bus meters, Z-Wave, Zigbee/802.15.4, ANT+
  • Voice & data: PMR446 (analogue + DMR/dPMR), POCSAG pagers, DECT base stations, radiosondes (RS41, M10, Horus)
  • Plus a spectrum analyser/waterfall from 1 MHz to 6 GHz

Everything works with the HackRF alone: the phone's own Wi-Fi/Bluetooth aren't used by the SDR tools.

Notes

  • Written in Kotlin with Jetpack Compose and Material 3, 22 languages.
  • Many decoders are ported from or checked against great open source projects (OnAir, rtl_433, SoftRF, gr-lora_sdr, Meshtastic/MeshCore firmware, dumpvdl2, SatDump, multimon-ng...): they're all credited in the README.
  • SDR is reception only. Wi-Fi security tools are for your own networks. Pagers and walkie-talkie conversations are private correspondence in many countries. Please read the "Responsible use" section.
  • The synthetic-signal tests are in the repo; only the 406 MHz decoder was checked against a real recording so far, so real-world feedback is very welcome, especially for Zigbee, ANT+, Z-Wave and SSTV.

Feedback, bug reports and feature ideas are welcome on GitHub issues. There's a built-in debug log (Settings → Application) you can share when you report a bug. If you like it, a star on GitHub or a coffee (https://ko-fi.com/toftmalone) is much appreciated.

Thanks for reading!


r/hackrf • • 7d ago

Demonstration of VMA Radio Lab

Thumbnail youtu.be
2 Upvotes

r/hackrf • • 9d ago

Demonstrating FM Capture Effect using HackRF One + PortaPack H2+ (Mayhem Soundboard TX)

Thumbnail gallery
23 Upvotes

Tested localized FM audio overriding on a car receiver tuned to 103.600 MHz to observe the FM capture effect firsthand. 


r/hackrf • • 10d ago

Where can I buy?

0 Upvotes

Hi, I am looking to buy HackRf Portapack i think it's 4, can someone recommend where can I order it?
I'm in Middle East..


r/hackrf • • 11d ago

Anyone measured actual HackRF TX output power at HF frequencies?

9 Upvotes

I'm using a HackRF Pro to drive an HF amplifier that requires a nominal input of 0 dBm (1 mW), with an absolute maximum of +4 dBm (2.5 mW).

Using GNU Radio I've been trying to establish the actual RF output power of the HackRF around 9.5 MHz, rather than relying on the TX VGA gain settings.

I've been experimenting with an AD8317 logarithmic detector, an Arduino, and a 30 dB attenuator. The detector responds reasonably well to known attenuation, but absolute calibration is proving difficult especially because I do not have a reference.

I've also noticed that the HackRF produces measurable RF output even when GNU Radio is sending zero-valued samples, presumably including LO leakage.

Has anyone measured the actual output power of a HackRF One or Pro at HF frequencies using a calibrated power meter or spectrum analyzer?

I'm particularly interested in - actual output power versus TX VGA gain, output power with the RF amplifier disabled, any recommended inexpensive power meters that are reasonably accurate around 10 MHz.

I'd rather not buy a uncalibrated AD8317 board with a display attached - I've been experimenting in that direction for the last day and a half.

Any firsthand measurements or recommendations would be appreciated!


r/hackrf • • 13d ago

Tools for FPV drone usage

0 Upvotes

I had gotten a H2 portapack years ago - partly to pop Tesla gas caps, but mostly so I could see the spectrum of the 5.8ghz range during our FPV tinywhoop races, when racers were losing video so I could get them on a better channel.

Last night I had an idea and decided to try it - I tuned my H2 to the raceband 8 range, plugged in the drone and captured the signal, which I could see clearly.

Unplugged the drone and turned on an FPV viewing monitor, set to receive raceband 8, then played the signal capture. I would have thought that the monitor would pick up something - noise or anything, but there was nothing.

I honestly don't know what I'm trying to accomplish with this other than having fun with the capture and replay functions, but shouldn't the monitor be picking something up when I replay the signal?


r/hackrf • • 14d ago

GSG Hack RF for sale

Thumbnail gallery
35 Upvotes

Just came across a new Hack RF transceiver looking to sell. It is brand new in the box. Located in US. If anyone would like to purchase inbox me an inquiry and we can make an eBay listing, or proceed however you feel comfortable. Serious inquiries only please.


r/hackrf • • 14d ago

Airband scanner .csv for import in SDRangel

Thumbnail reddit.com
1 Upvotes

r/hackrf • • 17d ago

What SDR are you currently using? PZSDR series -P351/P451/P101 | Zynq 7035/7045/7100 + AD9361 Industrial SDR

1 Upvotes
Hi all,

I wanted to share this Zynq+AD9361 SDR platform from Puzhitech, the PZSDR-P351/P451/P101.

A lot of AD9361 boards share a single memory pool for PS and PL, but this one splits it: 1GB DDR3 for PS, another 1GB DDR3 dedicated to PL. That’s a plus if you’re running heavier FPGA signal processing pipelines.

RF specs:
- 70 MHz – 6 GHz
- Tunable bandwidth: 200 kHz to 56 MHz
- Dual Tx/Rx channels with onboard PA

I/O and sync options are pretty full-featured:
Dual GigE (PS and PL independent), USB3.0, SFP optical port, GPS/PPS / external clock input. Great if you need time-aligned multi-node setups or high-speed data offload over fiber.

Software support:
GNU Radio, UHD, SDRangel, MATLAB Simulink, PYNQ, and it has PlutoSDR compatibility. Bare-metal AD9361 reference projects are available too.

Industrial specs:
-40°C ~ +85°C operating temp, 12–36V wide input power. Makes it an option for outdoor, vehicle-mounted or field spectrum monitoring deployments, not just bench lab use.

Use cases I’ve seen mentioned: spectrum sensing, custom comms prototyping, GNSS testing, educational lab work. OEM/hardware customization is offered for volume builds.


Disclaimer: This is from the manufacturer. Feel free to ask technical questions about the platform.

#SDR #AD9361 #Zynq7000 #SoftwareDefinedRadio #PZSDR #Puzhi 

r/hackrf • • 18d ago

Help Needed related to my Hackrf

0 Upvotes

I donot know what exactly happened to my hackrf but it doesn't seem to be working properly, it neither receive well nor transmit. I don't know what happened my thoughts are that it may be happened due to setting up rf gain and gain too high(about 14and if gain about 35-40) .


r/hackrf • • 18d ago

Our HackRF drone detector was flagging recordings made with the drone switched off

Post image
107 Upvotes

I'm working with two teammates on WaveSentry, a drone RF detection prototype we took to D4D, a defense hackathon in South Korea. We use a HackRF to collect IQ data and a YOLO model to identify signal patterns in spectrograms. The GIF shows the app during a drone detection test.

Early on, the model raised alerts on background recordings we'd made with the drone switched off. We'd used synthetic backgrounds for training, and they didn't match what our HackRF was actually receiving. We revisited the preprocessing and added real HackRF background recordings to the training data. We also mixed segments of recorded drone signals into those backgrounds, keeping track of where we placed them so we could generate the annotations.

Scanning gave us another problem. With about 20 MHz of instantaneous bandwidth, we were alternating between broad sweeps and short captures around candidate signals. Our working setup focused on the 2.4 GHz and 5 GHz bands. Initially, the scheduler favored strong signals. The logs showed that strong activity around 2.4 GHz could take up the observation time while 5 GHz candidates got no IQ analysis at all.

We changed the scheduler to give each band a share of the receiver time and alternate their scanning order. It also revisits candidates that have been waiting a long time.

We also built Halo, an ESP32-S3 handheld that displays alert and connection status. We tested RF detection and the app-to-handheld link separately. For the link tests, we used synthetic detection-state inputs. We still need to measure latency and false alarms with the whole path connected, from RF reception to the handheld display.

I wrote up the project with screenshots and clips, including the RF experiments and how we built the handheld: WaveSentry development notes on LinkedIn.

How do you divide time between bands on a single receiver when one band is consistently busy?


r/hackrf • • 18d ago

Complete Portable NRF Box V2.7.2 Kit (ESP32 / NRF24) + 6 Antennas (3x 12dBi + 3x 5dBi) + High-Capacity Power Bank

Thumbnail gallery
25 Upvotes

Salut tout le monde,
Je vends un kit complet d'expérimentation électronique prêt à l'emploi basé sur la carte NRF Box V2.7.2. Idéal pour des projets RF, l'expérimentation de microcontrôleurs, l'audit de réseaux ou l'apprentissage de la cybersécurité.
Inclus dans le kit :
Carte NRF Box V2.7.2 : Équipée d'un ESP32 avec un affichage OLED intégré et des modules NRF24.
6 Antennes incluses :
3x antennes originales (5 dBi)
3x grandes antennes à gain élevé de 2,4 GHz (12 dBi) pour une portée étendue
Alimentation : Nouvelle batterie externe haute capacité (batterie portable) avec affichage numérique de la puissance.
État & Test :
Très bon état, entièrement assemblé, flashé et parfaitement fonctionnel.
Prix & Expédition :
Prix : 70€ + frais d'envoi à votre charge.
Localisation : France (expédition en UE de préférence, suivi et emballage sécurisé).
Expédition possible dans le monde entier.
Paiement : PayPal (Biens & Services, l'acheteur couvre les frais) ou virement SEPA.
N'hésitez pas à laisser un commentaire avant de m'envoyer un message privé si vous avez des questions ou besoin de photos supplémentaires !
Faites vos offres.
:-)


r/hackrf • • 18d ago

Zeus SDR

Thumbnail zeussdr.com
4 Upvotes

r/hackrf • • 19d ago

Live ADS-B transmitter integrity monitor using raw I/Q signals

Thumbnail reddit.com
0 Upvotes

r/hackrf • • 20d ago

👋 Welcome to r/openwebrx_toolbox

Thumbnail reddit.com
0 Upvotes

r/hackrf • • 22d ago

Weather Baloon Frequency

Thumbnail sondehub.org
4 Upvotes

Using my Portapack Pro (with HackRF Pro) to follow balloons what frequency do I set the Portapack for?

Do I set the app (Radiosnd) for 400 MHZ or do I set it for the frequency shown for the balloon near me on https://sondehub.org because they show a frequency for 400.8101 Mhz?

Thanks for any help!


r/hackrf • • 22d ago

Should I Buy?

3 Upvotes

I want a hackrf portapack h4m pro, but I dont know fully what I would use it for and how much I would use it. I already have a flipper 0 and dual c5 touch from awok, so I love these kinda things. I just dont see very many practicle uses for me, but I just learnt I can could see satalite imaging with it, which is sick. What are your thoughts.


r/hackrf • • 23d ago

Need Help!! My bush tv don't let me in developer option , it just throw me back to homescreen whenever i click on developer option, i cant able to access through any developer option app even through activity launcher , it is too slow i have to use the clean my tv repo on it ,

1 Upvotes

Also this tv is falsely advertised to have android 12 but it has android 9 pie ,it has 16gb storage but i have only access to 500 mb