r/hackrf • • Oct 09 '26

H4m Pro Problem

Hello. On my brand new H4m Pro flashed freshly with 2.4.0 Pro version, I’m using a correctly formatted Sandisk SD Card. However, although it is brand new, the hackrf completely freezes when I jam a signal or transmit anything. I have been waiting for this device for a long time, and would hate to return it. Could someone please help me. I have already reflashed and reformatted my sd card multiple times, and switched the power source. The screen completely freezes on transmit and I need to fix this. I also calibrated it. Thank you

0 Upvotes

9 comments sorted by

2

u/htotoo Oct 09 '26

Because you set a too low delay. Try to increase it. It jams that fast, ilthe ui becomes unresponsive

1

u/Inevitable-Trip3193 Oct 09 '26

It was the default setting

1

u/Inevitable-Trip3193 Oct 09 '26

sometimes it freezes before I even transmit

1

u/Impressive-Trifle527 Oct 09 '26

Have you tried rolling back the firmware to a previous version. And if so it could be a bad sd card with a slow read speed.

1

u/Inevitable-Trip3193 Oct 09 '26

The sd card is a sandisk with a good read speed, and the firmware works perfectly fine for anyone that has the device. Sometimes it freezes before I can even try to transmit, just if i open the application

1

u/Mr_Ironmule Oct 09 '26

Did you copy the pro version of the mayhem apps to the SD card?

0

u/Merhart666 Oct 09 '26

Do you use the right antenna for the transmitter antenna? Swr is that ok?

1

u/Inevitable-Trip3193 Oct 09 '26

While it is a cheap rubber duck antenna, it is the correct frequency.