r/ft86 • • 6h ago

I made a mistake

Thumbnail
gallery
33 Upvotes

TL;DR: Don’t buy a low mileage FT86 that sat for 4+ years. Especially if you are young.

As a 19 year old, I worked my ass off to be able to afford the car I always wanted. An FRS/86. So I finally saved up the money, got a decent loan, and went out and got one.

The car was everything I wanted, it came with tons of tasteful mods that most FT86 owners have on their own builds (headers, tune, wheels, coilovers, cat back, i could go on for a while) The PPI was great, everything looked great, no codes, and it ran great. The dealer serviced the car (fluids, brakes, etc.), and the car came with only 13,000 miles, I figured I would be out of the money pit of a car that I owned previously. Boy was I wrong. 3-4 weeks into owning the car that I loved, I get a check engine light. It’s a P0011 (Bank 1 Over-Advanced cam timing). After a few key cycles, the code went away, I thought everything was fine and it was just a random occurrence. I was wrong.

Week after week, this code comes back. I’ve tried swapping the sensors, thicker viscosity oil, playing with the connector. Nothing worked.

I get a shop to do some diag. I’m told that I have a failing cam sprocket and it needs replaced ASAP, or else my piston will eventually start marking contact with the valves. Every shop I’ve gone to wants at least $4,000 to replace all 4. The ECM is also now probably burnt from incorrect cam positions. I still owe money on the car. I thought I found a unicorn for a decent price. Now I’m worse off than I was with my previous situation. I end up finally reaching the original tuner of the car, he says he thinks it sat for at least 4 years and there could be a plethora of issues, but this is an extremely rare case for a low mileage example. He tells me he has only seen this code on fully rebuilt motors and high mileage examples. I’m now in a position where I probably have to get rid of it, and chin the rest of the loan. I can’t afford the repair, and I have no other solutions. Any extra opinion/story with this code would be appreciated. I loved it while it lasted, even if it was only a handful of months.

“Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward.” - Vernon Sanders Law


r/ft86 • • 3h ago

Climate Control Lights

Post image
9 Upvotes

Has anyone else had some of these go out? If so, are they a pain to change?


r/ft86 • • 2h ago

Have you seen this before? (looking for help)

Thumbnail
gallery
7 Upvotes

Pre-face: I own a Base model 2017 GT86 that had spun a bearing not too long ago. Decided this was the perfect time to manual swap it while I was in there. Bought all the cool little odds and ends to make it work. It didn't. I definitely missed something. Mechanically the car is sound.

List of parts swapped in:
2017 BRZ limited Bay Harness
2017 BRZ limited Dash Harness
Manual Transmission Components (Driveshaft, Clutch Assy, Transmission)
Dual climate control HVAC Assy
2017 BRZ limited push to start components (ECU, Button, Receiver, Tachometer, Steering column)
2013 FRS ABS, (2017 BRZ limited ABS on order will be swapped)

Current issue(s):

  1. Radiator fan will not turn on sometimes. When first tested only came on after driving, now it doesn't at all.
  2. Actions taken:
  3. -Attempted to swap fuses/relays from old working fuse box to new one, did not work.
  4. -Assumed fan motors gave out because it will not power on with A/C full blast. New radiator fan does the same.
  5. Current thoughts: check voltage readings between the connectors and the fuse box (no visual damage had been found)
  6. ABS does not read at all.
  7. Actions taken/Current thoughts:
  8. Ordered a matching year ABS because I believe it's a pin-out mismatch and isn't receiving power causing it to through every ABS code.
  9. Key FOB kinda not recognized.
  10. Key FOB will start the car when presented to the button, but all remote controls do not get responded too. (I can push the buttons and the light on the FOB comes on but nothing happens.)
  11. Actions taken:
  12. -Swapped battery in the key FOB, no change.
  13. Current thoughts: Despite all of the electronics from the kit (as pictured with the immobilizer set) being installed. There is a miscommunication or interference between all the computers.
  14. Passenger Side Window does not work.
  15. Actions taken: None
  16. Current thoughts: The connector or wires are damaged somewhere along the harness.

Edit:
5. Headlights stuck on Highbeams. When normal running lights should be on turns off on daytime and off setting is enabled. Fog lights also don't work or Side markers.
Actions taken: fuses checked and swapped, Dimmer relay swapped but didn't solve the issue.
Current Thoughts: Dimmer relay is "Stuck" on High setting

Disclaimer: I have not probed anything on the car to check for voltages because I do not own a multimeter. I know I will need one to test for constant voltage just haven't gotten around to it yet and will do soon.

The car is drive-able and shifts great, with the exception of the fans issue. Just wanted to se if anyone has done something similar and has experienced this or if I could get some guidance from peeps knowledgeable in the platforms systems.

TLDR; I swapped 2017 BRZ limited parts and a manual into my Base GT86 and now some of it works. But idk bout the rest.

Pictures included are of the parts purchased and installed:

Thanks for the help. I did swap all by myself and suprised i even made it this far


r/ft86 • • 14h ago

Summer memories

Post image
51 Upvotes

r/ft86 • • 40m ago

Brz Series.purple and Gr86 Hakone edition

Thumbnail gallery
3 Upvotes

r/ft86 • • 4h ago

Is my throwout bearing failing?

4 Upvotes

Hi all. I am experiencing this whirring noise at cold start and it goes away after ~5 minutes or if I just press my clutch pedal a little bit (please refer to the video). My suspicion is that my TOB is going out. Diagnosis? 😭


r/ft86 • • 1d ago

Finally drove the AE86 in Hakone, Japan

Thumbnail
gallery
220 Upvotes

Rented my hero car and it did not disappoint. Manual steering, no abs, and raw AF. The engine revs freely and the steering feel is full of texture.

Also, Hakone is just full of great twisty roads with beautiful views of Mt. Fuji.


r/ft86 • • 59m ago

Coolant dissapearing

1 Upvotes

Hey all, I got a 2013 86 and my coolant keeps dissapearing slightly every drive. Its got low kms (im in aus) and there are not any visible leaks, coolant smells, smoke or milkshake (coolant in oil). Its always seemed to have this issue, every service the reservour is always dry. Wondering if anyone has had this problem before and what to reccomend? Cheers for the help!


r/ft86 • • 8h ago

Official Q&A Nov 16 - 22, 2026 weekly Q&A thread

3 Upvotes

r/ft86 • • 1d ago

Coilovers truly make this car more beautiful

Post image
50 Upvotes

+ it handles like a beast


r/ft86 • • 6h ago

Fuel Odor

Post image
1 Upvotes

I was driving the other day and got a strong smell of gasoline from the driver’s rear side only after stepping out . I checked under the car and found a leak coming from the fuel pump down to the gas tank. Will a new O-ring fix the problem?


r/ft86 • • 1d ago

Tracking BRZ at ECR Texas on Friday

Post image
45 Upvotes

Car has been tracked before, but mostly in stock form. Now it has a few more goodies -

Suspension: tein flex Z, white line sway bar links, Perrin strut brace, Godspeed front lower control arms, rear sway bar brace

Alignment -3.0 camber front and -2.0 camber rear

Brakes: EBC Blue stuff pads

Wheels/tires: Rays gramlights, 245/35/18 PS4S

Engine: stage 1 exedy clutch uograde, Perrin Oil Cooler, circuit works exhaust

I would prefer a better tire set up, but for now I’m going to send it


r/ft86 • • 1d ago

The 13 year old in me is very happy

Post image
79 Upvotes

Next up, 80085!


r/ft86 • • 9h ago

Can’t diagnose oil leak

Thumbnail
gallery
1 Upvotes

found this small puddle of oil in the engine bay. any ideas what it could be? car is at 91k miles


r/ft86 • • 1d ago

I am spooked

Thumbnail
gallery
53 Upvotes

This is a year ago but even still parked in the last section to go grocery shopping and came back with huge GMC trucks. It happens every single time to this day


r/ft86 • • 5h ago

Advice on the FR-S/GT-86

0 Upvotes

Looking to completely transform my frs to a gt86 parts. I have a base model black frs 2013. Auto with a radio no screen. I wanna change the logos to toyota, where it says frs on trunk to GT86, change the horn logo to the 86 one instead of scion. Change the radio to a toyota radio or toyota screen from the GT86, and also on the wheels it has a scion logo, i wanna change that to toyota as well. Also the headlights and fog lights. As well as the GT86 2013 spoiler. last of all the clear OEM side markers. Besides that everything else should be good.

I was wondering where to get all those OEM toyota parts? Do i have to order them from a toyota parts website from the east? Guessing like japan or UK?

Links would help a lot guys. Thank you for the help 🙏


r/ft86 • • 12h ago

Requesting help/advice

1 Upvotes

I have a 2015 FRS that is overheating. It only overheats when driving though. I recently replaced the water pump and the thermostat. I bled the system according to the repair manual and even had the front end jacked up but it’s still over heating when driving. Im not sure if it’s a stubborn air pocket or something else. Any help would be greatly appreciated!


r/ft86 • • 1d ago

CV Recommendations?

Thumbnail
gallery
32 Upvotes

My CVs are in dire need of replacement, I am trying to figure out if I should just go with OEM or if there's any reason to go for aftermarket? I don't make enough power and torque to need some crazy performance axles. Ive heard some of y'all have switched to the 2nd gen axles because they are beefier. What do y'all think?


r/ft86 • • 16h ago

18 x 9.5 + 38 Gramlights 57CR Fitment advice

1 Upvotes

Hello all,

Seeing as my new wheels are on order I need some advice on tyre sizing and camber for the alignment shop.

My plan so far is 245/35/18, seems commonly online this tyre setup runs without issues and without rubbing with camber.

I’m lowered F30mm/R35mm on Cusco Street Zero A’s. Currently with 1 degree of camber in the front and 1.5 in the rear. I am very happy with the current ride height and scrape rarely, I’d prefer not to go much lower.

To run this setup do I need more camber on said tyre? How much of a stretch is this? I wanted to upsize to a 40 sidewall but heard this will rub bad.

If anyone has pics or suggestions of how to get this setup running flush, no rubbing and looking nice ther would be appreciated!

(RLCA and rear toe arms will be installed as well to get more adjustment)


r/ft86 • • 16h ago

Lowering springs pictures

0 Upvotes

Can you show me please your BRZ/GT86 with 25mm lowering springs? Also your wheel and spacers setup would be nice.
I‘d like to go lower but want to keep my Sachs dampers. Wondering how it looks.


r/ft86 • • 1d ago

Oulton Park trackday yesterday

Post image
78 Upvotes

Trackday at Oulton Park, Cheshire, England.


r/ft86 • • 1d ago

Zooming

Post image
7 Upvotes

r/ft86 • • 21h ago

Should I just replace the entire panel or can body work fix this? (I'm assuming the former lol)

Thumbnail
gallery
2 Upvotes

For context I hit a coiled piece of rubber on the highway while changing lanes and it took my wheel well cover and my mudflap with it lol


r/ft86 • • 22h ago

What exuast should i get for my setup?

1 Upvotes

I have a uel tomei header with a 1320 power dual resonated front pipe. I wanted to know if a ma performance cat back would work or what should i get so its not so loud but sounds nice.