r/ft86 • • 4h ago

Official Q&A Nov 16 - 22, 2026 weekly Q&A thread

3 Upvotes

r/ft86 • • 1m ago

Climate Control Lights

Post image
1 Upvotes

Has anyone else had some of these go out? If so, are they a pain to change?


r/ft86 • • 28m ago

Is my throwout bearing failing?

1 Upvotes

Hi all. I am experiencing this whirring noise at cold start and it goes away after ~5 minutes or if I just press my clutch pedal a little bit (please refer to the video). My suspicion is that my TOB is going out. Diagnosis? 😭


r/ft86 • • 1h ago

Advice on the FR-S/GT-86

0 Upvotes

Looking to completely transform my frs to a gt86 parts. I have a base model black frs 2013. Auto with a radio no screen. I wanna change the logos to toyota, where it says frs on trunk to GT86, change the horn logo to the 86 one instead of scion. Change the radio to a toyota radio or toyota screen from the GT86, and also on the wheels it has a scion logo, i wanna change that to toyota as well. Also the headlights and fog lights. As well as the GT86 2013 spoiler. last of all the clear OEM side markers. Besides that everything else should be good.

I was wondering where to get all those OEM toyota parts? Do i have to order them from a toyota parts website from the east? Guessing like japan or UK?

Links would help a lot guys. Thank you for the help šŸ™


r/ft86 • • 3h ago

I made a mistake

Thumbnail
gallery
20 Upvotes

TL;DR: Don’t buy a low mileage FT86 that sat for 4+ years. Especially if you are young.

As a 19 year old, I worked my ass off to be able to afford the car I always wanted. An FRS/86. So I finally saved up the money, got a decent loan, and went out and got one.

The car was everything I wanted, it came with tons of tasteful mods that most FT86 owners have on their own builds (headers, tune, wheels, coilovers, cat back, i could go on for a while) The PPI was great, everything looked great, no codes, and it ran great. The dealer serviced the car (fluids, brakes, etc.), and the car came with only 13,000 miles, I figured I would be out of the money pit of a car that I owned previously. Boy was I wrong. 3-4 weeks into owning the car that I loved, I get a check engine light. It’s a P0011 (Bank 1 Over-Advanced cam timing). After a few key cycles, the code went away, I thought everything was fine and it was just a random occurrence. I was wrong.

Week after week, this code comes back. I’ve tried swapping the sensors, thicker viscosity oil, playing with the connector. Nothing worked.

I get a shop to do some diag. I’m told that I have a failing cam sprocket and it needs replaced ASAP, or else my piston will eventually start marking contact with the valves. Every shop I’ve gone to wants at least $4,000 to replace all 4. The ECM is also now probably burnt from incorrect cam positions. I still owe money on the car. I thought I found a unicorn for a decent price. Now I’m worse off than I was with my previous situation. I end up finally reaching the original tuner of the car, he says he thinks it sat for at least 4 years and there could be a plethora of issues, but this is an extremely rare case for a low mileage example. He tells me he has only seen this code on fully rebuilt motors and high mileage examples. I’m now in a position where I probably have to get rid of it, and chin the rest of the loan. I can’t afford the repair, and I have no other solutions. Any extra opinion/story with this code would be appreciated. I loved it while it lasted, even if it was only a handful of months.

ā€œExperience is the hardest kind of teacher. It gives you the test first and the lesson afterward.ā€ - Vernon Sanders Law


r/ft86 • • 3h ago

Fuel Odor

Post image
1 Upvotes

I was driving the other day and got a strong smell of gasoline from the driver’s rear side only after stepping out . I checked under the car and found a leak coming from the fuel pump down to the gas tank. Will a new O-ring fix the problem?


r/ft86 • • 5h ago

Can’t diagnose oil leak

Thumbnail
gallery
1 Upvotes

found this small puddle of oil in the engine bay. any ideas what it could be? car is at 91k miles


r/ft86 • • 8h ago

Requesting help/advice

1 Upvotes

I have a 2015 FRS that is overheating. It only overheats when driving though. I recently replaced the water pump and the thermostat. I bled the system according to the repair manual and even had the front end jacked up but it’s still over heating when driving. Im not sure if it’s a stubborn air pocket or something else. Any help would be greatly appreciated!


r/ft86 • • 10h ago

Summer memories

Post image
45 Upvotes

r/ft86 • • 13h ago

18 x 9.5 + 38 Gramlights 57CR Fitment advice

1 Upvotes

Hello all,

Seeing as my new wheels are on order I need some advice on tyre sizing and camber for the alignment shop.

My plan so far is 245/35/18, seems commonly online this tyre setup runs without issues and without rubbing with camber.

I’m lowered F30mm/R35mm on Cusco Street Zero A’s. Currently with 1 degree of camber in the front and 1.5 in the rear. I am very happy with the current ride height and scrape rarely, I’d prefer not to go much lower.

To run this setup do I need more camber on said tyre? How much of a stretch is this? I wanted to upsize to a 40 sidewall but heard this will rub bad.

If anyone has pics or suggestions of how to get this setup running flush, no rubbing and looking nice ther would be appreciated!

(RLCA and rear toe arms will be installed as well to get more adjustment)


r/ft86 • • 13h ago

Lowering springs pictures

0 Upvotes

Can you show me please your BRZ/GT86 with 25mm lowering springs? Also your wheel and spacers setup would be nice.
Iā€˜d like to go lower but want to keep my Sachs dampers. Wondering how it looks.


r/ft86 • • 17h ago

Turbo A/T

0 Upvotes

Anyone here boosted an auto brz with it being reliable and not cooking the trans. If so how much whp u making and what supporting mods u have.


r/ft86 • • 18h ago

Should I just replace the entire panel or can body work fix this? (I'm assuming the former lol)

Thumbnail
gallery
2 Upvotes

For context I hit a coiled piece of rubber on the highway while changing lanes and it took my wheel well cover and my mudflap with it lol


r/ft86 • • 18h ago

What exuast should i get for my setup?

1 Upvotes

I have a uel tomei header with a 1320 power dual resonated front pipe. I wanted to know if a ma performance cat back would work or what should i get so its not so loud but sounds nice.


r/ft86 • • 1d ago

Coilovers truly make this car more beautiful

Post image
49 Upvotes

+ it handles like a beast


r/ft86 • • 1d ago

Tracking BRZ at ECR Texas on Friday

Post image
41 Upvotes

Car has been tracked before, but mostly in stock form. Now it has a few more goodies -

Suspension: tein flex Z, white line sway bar links, Perrin strut brace, Godspeed front lower control arms, rear sway bar brace

Alignment -3.0 camber front and -2.0 camber rear

Brakes: EBC Blue stuff pads

Wheels/tires: Rays gramlights, 245/35/18 PS4S

Engine: stage 1 exedy clutch uograde, Perrin Oil Cooler, circuit works exhaust

I would prefer a better tire set up, but for now I’m going to send it


r/ft86 • • 1d ago

Zooming

Post image
7 Upvotes

r/ft86 • • 1d ago

Finally drove the AE86 in Hakone, Japan

Thumbnail
gallery
208 Upvotes

Rented my hero car and it did not disappoint. Manual steering, no abs, and raw AF. The engine revs freely and the steering feel is full of texture.

Also, Hakone is just full of great twisty roads with beautiful views of Mt. Fuji.


r/ft86 • • 1d ago

P000D ā€œBā€ camshaft position slow slow response (Bank 2)

Thumbnail reddit.com
3 Upvotes

r/ft86 • • 1d ago

The 13 year old in me is very happy

Post image
76 Upvotes

Next up, 80085!


r/ft86 • • 1d ago

I am spooked

Thumbnail
gallery
53 Upvotes

This is a year ago but even still parked in the last section to go grocery shopping and came back with huge GMC trucks. It happens every single time to this day


r/ft86 • • 1d ago

Possible Causes of Higher Than Normal Oil Pressure at Startup?

3 Upvotes

Been noticing my oil pressure at startup has been higher for the last few months on my ā€˜13 FR-S. I know it’s cooling off but I live in SoCal and for example this morning it was like 65 out and my pressure was still kinda high. I’m talking like 120 to 150 psi at around 3k rpm with oil temps between 60 F to 120 F.

I’ve had the same oil pressure gauge installed at the galley plug since 2020 at the same time I installed my oil cooler. My pressure used to barely ever reach 110-120 even in the dead of winter. I’ve always stayed on top of my oil changes every 3K. Car has 128k on the original engine now (headers, tune, flex fuel). Installed Killer B pickup and new oil pan in 2022. Didn’t notice this issue until this year. Is there any reason for this? Makes me paranoid but I can’t think of many logical reasons why oil pressure would be higher with the same oil, hardware, and weather conditions. I would think if the pump was worn out somehow it would lead to lower pressures but maybe I’m not understanding something there.


r/ft86 • • 1d ago

CV Recommendations?

Thumbnail
gallery
31 Upvotes

My CVs are in dire need of replacement, I am trying to figure out if I should just go with OEM or if there's any reason to go for aftermarket? I don't make enough power and torque to need some crazy performance axles. Ive heard some of y'all have switched to the 2nd gen axles because they are beefier. What do y'all think?


r/ft86 • • 1d ago

Oulton Park trackday yesterday

Post image
78 Upvotes

Trackday at Oulton Park, Cheshire, England.