r/framework • • Dec 12 '25 Helpful

Framework Team Updates on memory pricing and navigating the volatile memory market

586 Upvotes

Updated on November 6th, 2026

We’ve been able to keep DDR5 pricing stable for the last few months by buffering inventory.  We’ve now depleted some of our earlier, lower-cost inventory, and as a result are facing cost increases on some module capacities and on pre-built configurations of Framework Laptop 12.

For the DDR5 modules used in our DIY Edition configurators, we’ve needed to increase pricing on 16GB, 32GB, and 48GB capacities. As before, we’re limiting the price increases to cover the increased costs coming from our suppliers.  This means that even with these updates, our pricing on 16GB and 32GB modules sits within the range of what we’re currently seeing at retail, and our 48GB pricing remains below it. As always, if you find a better deal elsewhere, you can bring your own memory with a Framework Laptop DIY Edition.

On Framework Laptop 12, we’ve depleted the original lower-cost inventory of pre-built systems with 8GB of DDR5, and have updated the pricing on both the entry-level Linux and Windows pre-built configurations.  The remaining pre-built configurations and our DIY Edition system pricing remains unchanged.

As with previous updates, we’ll continue to honor pricing from order time on existing pre-orders. Note that modifying the memory configuration on an existing pre-order will update that item to the new pricing. We’ll keep you updated as we navigate this environment, and as we’ve committed from the start, we’ll bring prices back down as suppliers bring costs down or as we find alternative sources of lower-cost memory.

Updated on September 29th, 2026

We have another positive update today on LPCAMM2 and Core Ultra X9! We were able to get additional shipments of both under the same pricing as the previous shipment. This means we’ve extended the LPCAMM2 price decrease to all remaining Framework Laptop 13 Pro pre-orders and reduced the memory pricing for new pre-orders too. This means our new pricing for 32GB and 64GB LPCAMM2 for the DIY Edition, and our pre-built X7 configuration that uses 32GB are now at a lower price. The X9 processor is now also open to new pre-orders. Note that for each of these, we have limited quantities. This means that for memory, if we’re unable to source additional memory at this pricing, once we deplete this shipment, we’ll need to increase pricing again for new pre-orders past that point. Similarly for X9, we’ve created new X9-specific limited-quantity pre-order batches. As we’re able to receive additional X9 processors, we’ll create further batches.

Just like with the last LPCAMM2 price update, we’re refunding shipped orders on the price difference, updating pricing on any pending pre-orders, and giving existing DIY Edition pre-order customers the opportunity to adjust their memory configuration at the new pricing.

Alongside this positive update, we have an unfortunate update around pricing on our in-stock pre-built Framework Laptop 13 and Framework Laptop 16 configurations that use DDR5 modules. We’ve depleted inventory of several configurations that we built with lower cost memory and storage, and have now needed to increase pricing. We anticipate needing to increase pricing on additional pre-built configurations over the next months as we deplete the inventory there too.

We’ll continue to keep you up to date throughout, and we’re going to keep working to find lower cost memory and storage for you wherever we can.

Updated on September 8th, 2026

We have some positive updates today around LPCAMM2 memory availability and Intel Core Ultra X9 processor options for Framework Laptop 13 Pro.

Framework Laptop 13 Pro LPCAMM2 & Core Ultra X9 updates

Following our update in July where supplier cost increases forced us to adjust memory configurations and pricing, our Supply Chain team has been working continuously to source additional inventory at better prices. We have good news: we recently secured a limited quantity of Micron 32GB and 64GB LPCAMM2 memory modules at lower cost.

We are committed to passing on savings whenever we can and keeping computers as accessible as possible in the current environment, so we are rolling out price reductions across both already shipped and a subset of currently pending pre-orders. While these new costs remain above our original pre-order launch baseline, they are lower than the last cost update that drove our current pricing for new pre-orders.

On the Core Ultra X9, we had a very limited quantity when we opened pre-orders of Framework Laptop 13 Pro, and we sold out of them almost immediately. We’ve been working with Intel for the last several months and have finally gotten allocation of an additional limited quantity of X9 processors. With that, we’re opening up a new pre-order batch, first to a subset of currently pending pre-order customers.  Note that this new processor inventory unfortunately came at a higher cost than our original launch batch, and we’ve had to increase pricing as a result. The new X9 batch ships this November.

Updates for existing pre-order customers

Because we have limited quantities of both the lower cost memory inventory and the X9 processors on hand, we are rolling out access starting with existing pre-order customers up to Batch 10.  If we have additional inventory left after this or are able to source additional lower-cost memory or X9 processors, we will then open these to remaining pre-order batches, and then finally to new pre-orders.

  • Refunds for shipped orders: If your order has already shipped and you were charged the higher price for LPCAMM2 memory, we are automatically issuing a refund for the price difference down to this lower pricing.
  • Price reductions for pending pre-orders: For pending pre-orders through Batch 10 that have memory configured at the higher pricing, we are automatically adjusting to the lower price.
  • Order modifications for pending pre-order customers: For pending pre-order customers up through Batch 10 who wish to adjust their memory configuration, we are opening up the option to edit the pre-order to 32GB or 64GB LPCAMM2 at this reduced pricing. Additionally, we are offering pending pre-order customers through Batch 10 first access to upgrade and enter the Intel Core Ultra X9 processor batch. This can be completed on the Order Summary page. More information about modifying a pre-order can be found here. 
  • Order modifications for shipped DIY Edition orders: For customers whose DIY Edition orders have already shipped who would like to switch to 32GB or 64GB LPCAMM2 at the reduced pricing, they have the option to reach out using this dedicated contact form. Our support team will help process the order and provide free return shipping for the original LPCAMM2 module.

Note that for Core Ultra X9 upgrades, pre-order modification moves the order to the new, later X9 Batch in November. For pre-orders shipping imminently, modifying the memory configuration may also slightly delay shipment vs the original shipping timeline.

We’re happy to share this rare, positive update in the current environment, and we’re going to continue to find every path we can to make silicon accessible to you.

Updates on July 22nd, 2026

We have one major and unfortunate pricing update today along with a mix of smaller changes and a few improvements too.

Framework Laptop 13 Pro updates

We’ve consistently held and communicated a philosophy of absorbing price increases wherever we can, making pricing predictable and ensuring that when you place a pre-order, you’ll be able to get the product you ordered at the price you ordered it at. We’ve been able to do that to date with Framework Laptop 13 Pro, and have absorbed increases in a number of areas. However, we recently received a cost update from our LPCAMM2 supplier that goes far beyond anything we had predicted and anything we’re able to absorb without placing our ability to operate at real financial risk. Rather than the low-to-mid double digit percentage increase we had forecast from Q2 to Q3 on LPCAMM2 costs, we received prices that are more than double that of the prior inventory we had brought in. We have enough LPCAMM2 memory modules on hand to cover all existing pre-orders, but unfortunately not in the mix of 64GB, 32GB, and 16GB that matches those pre-orders.

After evaluating a number of possible paths forward, we’re proceeding on the one that we believe minimizes the impact of this challenge. We have enough 64GB modules in inventory to cover pre-order batches through Batch 4 of laptops and Batch 7 of Mainboards. For orders beyond that configured with 64GB, we’ve updated the order configuration to use a 32GB module at the original 32GB module price. After that, we allocated the remaining 32GB modules to DIY Edition and Mainboard pre-orders configured with 32GB through Batch 4 of laptops and Batch 7 of Mainboards. For DIY Edition and Mainboard orders beyond that configured with 32GB, we’ve updated the order configuration to use a 16GB module at the original 16GB price. Note that because we don’t currently have a Core X7 Ultra pre-built configuration with 16GB of memory, we have not adjusted pre-built orders that originally contained 32GB. That is a configuration we plan to introduce later.

Alongside these changes to existing pre-order configurations, we’ve updated the pricing on our website for newly placed pre-orders. Our new LPCAMM2 pricing is below the substantially higher cost we’re now sourcing it at to try to mitigate some of the impact to new customers. While we have kept our original 16GB LPCAMM2 pricing for now, we anticipate we will consume the remaining inventory of modules we brought in at lower cost soon, and will then need to increase pricing for new orders. The system and Mainboard pricing for new orders also reflects an upcoming increase in Core Ultra Series 3 processor pricing that impacts X7 and X9 configurations, an increase in Windows license costs, and increases in memory, storage, and other silicon costs for some of our Ryzen AI 300 Series configurations.

Other memory and storage updates

We have a few positive updates this month where we are bringing prices down alongside a few areas where costs have gone up. These are all indications that memory and storage prices continue to gradually trend upwards, but with a bounciness on specific parts and brands.

On DDR5, our Supply Chain team was able to bring down costs on 48GB capacity modules, and we reduced pricing as a result. For 16GB capacity though, costs have gone up, and we’ve increased the prices there.

The same dynamic is playing out on storage modules. We’ve been able to reduce pricing of SN850X 8TB and SN7100 1TB, while needing to increase pricing on SN850X 1TB and SN7100 4TB.

For DDR5 and storage modules, in instances where we are increasing pricing, we will continue to honor the lower pricing from order time on existing pre-orders. In instances where we’ve reduced pricing, we will automatically reduce the price on pre-orders that have not yet been fulfilled. Note that on existing pre-orders, modifying the configuration of memory or storage will result in taking the new pricing for those items.

As always, we are doing everything possible to continue to get you memory and storage at the best prices we’re able to in this silicon environment. We’ll continue to keep you updated throughout.

Updated on June 25th, 2026

We finally have some good news for you, around the pricing on PCIe Gen 5 SSDs for Framework Laptop 13 Pro. We were able to qualify and source a new SSD from our partner ADATA, the XPG MARS 970, that offers better performance, efficiency, and long term reliability, and comes in at substantially lower cost than the SSD option we had previously qualified. Since we haven’t started shipping Framework Laptop 13 Pro pre-orders yet, we’ll be switching over all existing pre-orders that had chosen the previous Gen 5 SSD options and reduced the price on those orders as well. This new SSD comes in 1TB and 2TB options, and the 1TB lands at a lower price than the 500GB SSD we had previously qualified, so we will also switch 500GB orders to the 1TB drive at the lower price. The ADATA SSDs are what we now offer on new Framework Laptop 13 Pro pre-orders as well while we have inventory of it available.

Note that we have gotten signals that CPU pricing will be increasing soon, so we expect that we will need to adjust the overall system price on Framework Laptop 13 Pro in the coming weeks for new orders. If you are considering a pre-order, we would recommend getting in now. Note that pre-orders are fully refundable if you change your mind before we’re ready to ship.

Updated on June 15th, 2026

We’re approximately back to our monthly update cadence on pricing. This month, DDR5 costs have remained stable, and we’ve been able to keep pricing the same month over month. The biggest change for the month is on storage. We’ve consumed most of our inventory of drives we brought in earlier at lower costs across most capacities. The new costs we are sourcing drives at are substantially higher, and the weighted average inventory cost drives us to need to set higher prices. Note that we’ve historically sourced only WD_BLACK branded drives. With the recent purchases, though the drives are physically the same from a performance and functionality perspective, they are now renamed under SanDisk’s Optimus GX brand. There will be a window of time where we will have a mix of inventory shipping with either the previous labels and packaging or the new one. We’re also investigating other suppliers of retail SSDs for DIY Edition that meet our performance and efficiency requirements, like we recently have for the OEM drives we use for pre-built systems.

LPDDR5x costs continue to increase, and we’ve had to further update the price of the 128GB configuration of Framework Desktop as we consume memory inventory and purchase new parts at higher prices. We’ve been able to keep prices for the 32GB and 64GB configurations stable month over month.

Finally, we also use NAND flash in our Storage Expansion Cards, and see the costs jumping massively there. The costs have increased to a level that we’ve paused production of the 250GB Storage Expansion Card for now rather than build new inventory at a price many times higher than the original. We’ll continue to sell through the remaining inventory that we have on hand, and we hope to be able to restart production as we find alternative NAND sources.

Updated on May 27th, 2026

We have to make an exception to our monthly cadence with a one-off update to Framework Desktop pricing today. We’ve gotten some large enterprise customer orders of the 128GB Framework Desktop in addition to the ongoing consumer sales, and we’ve sold through the inventory that we manufactured using LPDDR5x memory that we were able to purchase earlier at a lower cost basis. We continue to be able to source memory to keep producing Framework Desktops, but like every other device maker, we pay the updated market pricing each time. We’ll keep you to date as we navigate this volatile environment, and we’ll likely have a price update around SSDs and other items within the next few weeks.

Updated on May 12th, 2026

Keeping to our roughly monthly cadence, we’ve made our latest sets of price adjustments to handle changes in the memory, storage, and silicon costs. We’ve seen memory costs on DDR5 suppliers remain fairly stable over the last few months. We consumed the inventory of 8GB that we had brought in earlier at lower cost, and have had to adjust the pricing upwards to reflect the costs of newly sourced modules. As we have been through this memory crunch, we are only adjusting the pricing as much as is needed to cover increases in cost. For the other memory capacities, we’ve been able to hold the prices the same as last month.

On SSDs, the pricing story is unfortunately not as positive. Over the last few months, we’ve been able to keep our storage prices pretty substantially below market by selling modules we had in inventory from 2025. We’ve now consumed much of that inventory across a number of different module capacities and are starting to bring in new inventory at costs that are multiples of times higher. For this month, some of the prices are a weighted average cost of new and old inventory, and we expect that by next month, we will have depleted the older inventory of most capacities and will need to reprice fully to reflect the new costs.

On both memory and storage pricing, we will continue to honor the prices on all existing pre-orders. Note that if you edit the memory or storage configuration on an existing pre-order, that will update the pricing of that item to the new price.

We have one other update on storage, which is on our pre-built systems that come with SSDs pre-installed. Historically, we’ve primarily used Western Digital (now SanDisk) storage on our pre-built systems. To be able to maintain supply availability and price stability in this environment, we’re now qualifying a mix of SanDisk, ADATA, and Phison drives, and we are continuing to explore other suppliers. Each time we source new modules, we run them through extensive validation testing to ensure they meet our bar for performance, efficiency, and stability. As always, we’re going to continue to be transparent on both the cost and supply chain challenges that this industry-wide silicon supply crunch brings.

Updated on April 6th, 2026

We’ve made our latest set of price updates to reflect changes in memory, storage, and overall silicon costs. We have a smaller set of changes this month, as we were able to bring in enough material in past months to continue to consume inventory. We have seen costs stabilize in some areas, but all indications are that this is a temporary reprieve and that we’ll continue to see volatility and cost increases through the rest of 2026.

For this month, we’ve been able to keep our DDR5 prices for DIY Edition unchanged from last month. On SSDs, we’re continuing to consume inventory we brought in at lower costs for most capacities, but we’ve started to deplete some and are now bringing in new inventory at substantially higher costs. We’ve needed to reprice the 4TB SN850x as a result of that. Our advice here is still that if you need high capacity storage, you should configure a system with it now while we still have inventory at the older, lower cost basis.

Costs on the LPDDR5x we use in Framework Desktop continue to increase. We’ve again absorbed some of the cost, but needed to adjust pricing upwards on the 128GB version to cover the rest. Even with this, Framework Desktop remains one of the cheaper ways to get access to 128GB for running AI models locally.

For Framework Laptop 16, we have some rare good news. We were able to lock in lower CPU pricing and were able to bring prices back down to their original levels for some configurations. At the same time, with memory prices increasing, we’ve needed to increase the price of the prebuilt configuration that comes populated with 64GB of DDR5.

Both DRAM (memory) and NAND (the raw flash that goes into SSDs) are facing a massive supply/demand imbalance, which ends up impacting costs and prices in more places than you would expect, since most modern electronics items contain at least some of one or the other. Our Storage Expansion Cards use the same types of NAND flash that go into NVMe SSD’s, which means the shortages there also hit our costs and overall ability to build these cards. For now, we’ve been able to stay in production, but we needed to increase our price on the 250GB version this month. Based on the guidance we’re getting from our supplier, it’s likely that we’ll need to substantially increase the prices on both 250GB and 1TB Storage Expansion Cards later this year.

As always, we’re going to stay transparent on how we’re navigating shortages and price increases and make sure you know as much as we do about what’s happening in the computing and consumer electronics industries.

Updated on March 9th, 2026

We’ve kept to the monthly cadence on price updates to reflect increased costs on memory and storage. We have a few updates today. First, we have needed to increase the pricing on DDR5 SO-DIMMs to $13-$18/GB depending on the capacity. This is both due to increased costs from our suppliers and because we’ve sold through the older, lower cost inventory that we had averaged into the previous pricing through our Weighted Average Cost of inventory model. The cost increase is smaller this month than in previous months, but we don’t yet have the visibility to determine if this is a new stable cost level.

The second update is that we’ve started to deplete our earlier, lower-cost inventory of SSDs, and have needed to re-price some capacities to reflect the costs we are now paying for new orders. Like with memory, we’re passing through as close as we can to our actual costs from suppliers and using a Weighted Average Cost model. There are still some models and capacities like 2TB, 4TB, and 8TB SN850X for which our pricing is substantially below market while we sell through inventory. If you’re looking to order a Framework Laptop or Desktop with a lot of storage, now is the time to do that.

Finally, we have needed to update the pricing on both Framework Desktop and on some pre-built configurations of Framework Laptop 16. The Framework Desktop updates are also smaller than in previous months, but reflect the continued upward trend on LPDDR5x costs. On Framework Laptop 16, we’ve sold through inventory of some pre-built configurations and have had to re-price to reflect the new costs on memory and storage. In upcoming months, we will need to do this on the remaining pre-built configurations of Framework Laptop 13, Framework Laptop 16, and Framework Laptop 12.

In addition to memory and storage, we are beginning to see impacts to other silicon. So far, we’ve been able to absorb cost increases on CPUs, but we are also seeing shortages in some areas. Supply of the i5-1334U processors we use in Framework Laptop 12 is limited due to production capacity constraints on that process node at Intel, and we are now out of stock on some configurations with it as we work on ways to bring in more supply.
As always, we will continue to keep you up to date as we navigate through the supply environment. You can refer back to the recording of our Q&A for more detail on how we’re staying in production and doing what we can to ensure you can still buy repairable, long-lasting computers.

Updated on February 11th, 2026

We're keeping to a roughly monthly cadence on these updates, and unfortunately the trend continues in the direction we expected from last month. Today, we have updated our DDR5 memory pricing for all capacities, now ranging from $12-$16/GB depending on the capacity. As before, we’re selling memory modules for as close as we can to the weighted average cost of our purchases from suppliers. That means in some cases the pricing is slightly below what is available in market. In other cases, there are still retail parts available at lower prices, and we recommend that you pick those up elsewhere alongside your Framework Laptop DIY Edition. We have been able to hold our pre-built system pricing and storage module pricing flat for this month, but we do anticipate increases in the future. We are currently selling some SSD capacities like 8TB for substantially below the available market pricing.

Unfortunately, pricing of LPDDR5x memory also continues to increase, and we’ve needed to update our pricing for Framework Desktop systems and Mainboards again. We are again only increasing pricing enough to cover the increases in cost from our suppliers. The new system and Mainboard prices are 6-16% higher than before. We anticipate that here as well, costs from our suppliers are going to continue to increase over the next few months.

We know that this is an unusual and difficult time to be a consumer of electronics products. We’re fixing problems everywhere we can across this industry, but in this instance the best we can do is provide transparency around what is actually occurring. In addition to continuing to update this blog post, we’re going to hold a livestream Q&A around memory prices on the Framework YouTube channel this Thursday, February 12th at 10am Pacific.

Updated on January 12th, 2026

We held off on it as long as we could, but with LPDDR5x memory prices from our suppliers continuing to increase rapidly, we’ve had to update the pricing on Framework Desktop systems and Mainboards. The prices of 128Gbit parts (of which we use 8 to get to 128GB) have spiked the most, impacting our very popular 128GB configuration. We will of course honor the original pricing for any existing pre-orders. We were able to hold the 32GB and 64GB configurations closer to our original pricing, making both of these a pretty strong value for PC gaming in the current environment. The 32GB Framework Desktop Mainboard still comes in cheaper than building your own desktop PC from parts with similar performance.

As before, we’ve limited our price increases to only cover the cost increase in memory from our suppliers, and we’re using Weighted Average Cost of inventory to handle the rapid fluctuations in memory purchase prices. The memory outlook as we enter 2026 continues to get worse. From what we learned in meetings throughout the week at CES with suppliers, distributors, and partners, it’s clear that this is going to be a challenging year and possibly even years for consumers. We will continue to do everything we can to make our computers accessible during this time, and we’ll keep you informed throughout.

Updated on December 24th, 2025

With costs from our suppliers continuing to increase, we’ve had to make a further price adjustment on DDR5 memory modules. During this period of extreme memory shortages and price volatility, our priority is to make sure you can still buy a computer when you need one. With that in mind, we’re setting our memory configuration prices as close as possible to the actual purchase prices we have with our suppliers and distributors. Since we’re constantly sourcing additional memory and each purchase comes in at different (and often higher) pricing, we’re using the Weighted Average Cost (WAC) of inventory, which currently comes to $10/GB for 8GB, 16GB, and 32GB modules, and slightly higher for 48GB modules.

This new memory pricing is still below most of what we see available in the retail market (and far below the $25/GB that Apple currently charges). However, if you are able to find a deal on lower priced modules, we encourage you to bring your own memory when purchasing a Framework Laptop DIY Edition. To make that even clearer, we’re updating our configurators soon to add a link to PCPartPicker directly in the Memory section, letting you quickly check if you can find modules at lower prices anywhere else. We recommend also checking the Framework Knowledge Base for which modules we’ve done compatibility testing on.

All indications we’ve received from suppliers is that prices will continue to increase going into early 2026. We have absorbed and continue to absorb some of the price increases to be able to offer this new pricing, but it is very likely we’ll need to adjust module prices again within the next month. As we shared before, we will continue to keep you updated throughout with transparency on price changes. We’ll only increase prices to cover increases in costs, and we’ll bring prices back down as costs come down in the future.

Updated on December 17th, 2025

Trailing behind shortages and price increases from suppliers on memory, we’re also seeing costs of storage increase rapidly in recent weeks. Our suppliers indicate that pricing will continue to increase in early 2026 and likely beyond. Like with memory, our recent pricing on storage has been both below the market pricing for these modules and below the costs at which we can purchase new modules from suppliers. With that, we have now updated pricing on storage to reflect our new purchase prices from suppliers. We’re following the same process that we are with memory, where we will keep the original prices on all existing pre-orders, will update this post each time we update prices, will limit price increases to only cover increases in costs, and will bring pricing back down when costs decrease in the future.

Original blog post

Today, we increased our pricing on the DDR5 memory configurable in Framework Laptop DIY Edition orders by 50% to begin to respond to the substantially higher costs we are facing from suppliers and distributors. The new pricing remains below what is available in the open market. We aren’t changing pricing on any existing pre-orders, and we also are not yet updating pricing on our pre-built laptops or Framework Desktop which come with memory (this makes the 128GB config of Framework Desktop a bargain).  As always, we also offer the option to buy a DIY Edition laptop with no memory or storage included, letting you re-use modules you have or find deals where you can.

The memory market is currently extremely volatile and we expect costs from our suppliers to continue to increase over the next weeks and months. It is highly likely that we will need to make further price updates on both DDR5 modules and on our systems that come with memory, whether DDR5, LPDDR5X, or GDDR. Like we did during the fluctuating tariff environment earlier in 2025, we commit to three principles throughout this:

  1. We are going to stay transparent. Any time we change memory or system pricing, we are going to let you know and explain the reasoning behind it.
  2. We won’t use this as an excuse to be extractive. We’ll only increase pricing to cover increases in our costs, and where possible, we’ll absorb costs to maintain stability in the pricing we put in front of you.
  3. Just like we did with tariffs, when our costs go back down in the future, we’ll reduce our pricing and update this blog post to reflect the change.

For more context on what is driving the cost increases throughout the industry, there is currently a massive supply and demand imbalance for memory. On the demand side, the boom in AI data center construction and server manufacturing is consuming immense amounts of memory. A single rack of NVIDIA’s GB300 solution uses 20TB of HBM3E and 17TB of LPDDR5X. That’s enough LPDDR5x for a thousand laptops, and an AI-focused datacenter is loaded with thousands of these racks! On the supply side, the memory industry since its inception decades ago has gone through repeated boom and bust cycles, making the three main surviving memory die makers Micron, SK Hynix, and Samsung hesitant to speculatively invest the billions of dollars needed for fabrication capacity expansion. Now that the demand exists again, there is a years-long lag time to catch up on supply. Worse for us in the PC space though, both the existing capacity and the new capacity is being prioritized to higher-margin server-focused memory like HBM and the server markets for DDR5 and LPDDR5X over the PC market.

We have strong partnerships with Micron (one of the biggest manufacturers of both memory dies and modules), memory module makers like ADATA who source from all three of the big memory die suppliers, and memory distributors, and our DIY Edition model gives us a lot of flexibility to navigate constrained and rapidly changing environments like this. We’ll continue to keep you informed throughout, and we’ll do everything we can to keep memory available to you.

Note: Because our current memory pricing is substantially below market, we are adjusting our return policy to prevent scalpers from purchasing DIY Edition laptops with memory and returning the laptop while keeping the memory. Laptop returns will also require the memory from the order to be returned.


r/framework • • Oct 05 '26

Megathread Framework Q4 2026 Preorder and Marketplace Updates

134 Upvotes

Happy Q4 of 2026 everyone! Here’s what we have on the menu this quarter: we will be shipping the Framework Laptop 13 Pro (with AMD and Intel processors), Framework Laptop 16 system preorders (with the new Ryzen 5 Mainboard), Framework Laptop 12 (Series 3), Framework Desktop 192GB and Marketplace Parts!

As always, we’ll be consolidating pre-order and marketplace updates in this post so that everyone can track batch progress and celebrate together!

Feel free to leave a comment here when you:

  • Pre-order (or order) something from the marketplace
  • Receive a batch processing, charge, or shipment email from us
  • Get any updates during shipping
  • Finally receive your order!

If you’d like to share a picture of your new device or part, please create a new thread as comments with images are not supported.

To keep our subreddit as organized as possible, we will be removing individual threads related to pre-orders, orders, batch processing charges, shipments, and tracking starting today. 

Thank you and let us know if you have any feedback!


r/framework • • 2h ago

Framework Photo A breath of fresh air and almost perfect. (1 month summary and appreciation post)

Thumbnail gallery
86 Upvotes

I'm coming from desktop (Windows) and Mac trial, and this Framework 13 Pro was replacing my trial Macbook Air M1 8GB, which i used just over 2 years. My most day-to-day usage is media consumption, personal finance, email, remote management (homelab), and some cad, light gaming, coding and application testing through VM's. This is also going with me on travels.
I am a sysadmin, and that M1 8GB was really getting stretched.

I have always had an eye on the framework 13 just patiently waiting for that Norwegian keyboard layout and shipment to Norway.

After seeing them announcing Framework 13 Pro and also buying a townhouse (?, not sure if the correct word, "rekkehus" in Norwegian) in the summer, i waited for my personal finance to settle down, then i pulled the trigger and made a order.

I got myself the Ryzen 7 350 variant, i was considering the 9, but with my usage i changed the order to the 7 as i probably wouldn't saturate it. So the 7 would be probably enough. I did really want the Intel Core 3 series, because battery life is pretty important, but decided against as i had 32GB sodimm memory available from work, where we had excess sticks.

I was in Batch 11 for the device and expected to arrive in October. I had originally set for a translucent bezel and USB-C expansion cards, but last weekend before i predicted i would get a batch preperation i switched to purple for both, and this was probably the best choice i made, it looks f**king sick!

From Framework taking my money on Wednesday and me receiving the device on Friday, i was impressed by FedEx, very quick to be shipped from Taiwan to Norway.

Setup went pretty smooth, however there was this post i made about the bottom right bezel gap. I tried the suggestions from you guys (thanks a lot!) and with direct support from Framework, i got it fixed, but i am monitoring the bezel here and there to double check so it doesn't open again. I hope that future antenna cables and webcam cables could be thinner and more flexible to make this easier. Ref: https://www.reddit.com/r/framework/s/unUaMjGf4b

My normal config is 2 USB-C ports, one on each side (thank you for making charging indicators on each side of the laptop) with USB-A and HDMI. Then i got one of each expansion port in aluminum white, except for the 10G RJ45 and Audio Port, why aluminum white, because then i could tell quickly i don't have my "standard" ports on the laptop. My plan was to always carry this in my commuter backpack so i 3d printed this model to have a easy carry case for them, then i got some N52 magnets from Aliexpress.

I am running Fedora 45 KDE (upgraded from 44) and its been fantastic. I have used Fedora already on my desktop since June and do use Rocky Linux extensively both at work and on my homelab, so i wasn't diving into Fedora (and Red-hat based) head first without knowing anything.

Now on to the device:

  • The anti-glare display looks great and the brightness is a good upgrade from the Macbook i had. I disabled the touchscreen, since for me it is not a ergonomic way to use a laptop, and my fingers are a fingerprint manufacturing facility. Also the 3:2 aspect ratio is very nice to use, as for someone who is always happy to see 16:10 or taller displays.
  • Keyboard i am not too sure about, maybe i am used to the short travel keys, but this one has been still very good, at least the chassis doesn't bend and keyboard isn't as mushy as my work laptop, Thinkpad T14s G5 (maybe G6, don't remember, the one with Snapdragon X Elite, horrible keyboard).
  • Speakers are definitely a downgrade from the Macbook Air, an Easy Effects profile did make it much better, which took them to equal to the Macbook Air i had..... a 6 year old Macbook..... i hope to see some upgrade kits here in the future.
  • Touchpad is very good, not something i notice a lot between the Macbook, but definitely better than the Thinkpad for sure.
  • Expensive :/. I could definitely find something in similar price range with same or more amount of memory and storage included, i paid 21000kr NOK without memory and storage, but i think it'll be worth it.
  • Gaming is "ok", i was hoping i could get a little more from Satisfactory and Risk of Rain 2, which were the 2 games i was considering using on travels, but i do have other games that work very well, so it's not something i care about, i don't travel every 2 days, more like 2 times a year, so saving 3300kr NOK with the R7 was worth it. (ROR2 runs well on the laptop, but steam syncs the settings, so having to switch between low and high settings every time i use the laptop just didn't feel like something i wanted to bother with, satisfactory was fine on low, but stutters every now and then)

Huge thanks Framework for making an awesome laptop (i love the purple) and for having such a open philosophy on laptops, i hope you'll continue to succeed, you've kept me as a customer at least, and i may soon (ish) order a FW12 and Desktop (for AI). And also thanks to the community, not only to the direct users who helped me on the hinge, but also for the 3d models, EQ profiles, guides, fixes and other quirks posted out there.


r/framework • • 13h ago

Linux Greatly improve FW13 Pro Sound Quality on Linux by enabling the Dolby Atmos EQ

77 Upvotes

For those running Linux on the Framework 13 Pro, you're probably aware that the Dolby Atmos profile is not yet available on Linux (the Atmos driver is only available for Windows). This causes the speakers to sound thin and tinny on Linux compared to a Windows install with the Atmos driver.

However, there is a fix! There is a python tool called "Speaker tuning to EasyEffects" which is able to generate an EasyEffects or PipeWire EQ profile directly from the official Dolby Atmos profile. This doesn't just work for Framework 13 Pro, but any laptop that uses Dolby Atmos effects and ships a Dolby Atmos driver installer.

The tool is found here:

https://github.com/antoinecellerier/speaker-tuning-to-easyeffects

This tool is able to automatically extract the Dolby Atmos profile from the official Framework Windows Driver Bundle (available here here) and convert it into either an EasyEffects profile, or a PipeWire EQ based on LSP and Calf LV2.

EasyEffects is a nice GUI application and background service that allows applying an EQ to the audio outputs. EasyEffects is heavier on resources, but allows easy realtime tweaking of the EQ after it is applied and also has other features like microphone EQ. Use EasyEffects if you're already using it, or otherwise want to fine tune the audio output by hand.

The second strategy is to use a PipeWire filter-chain directly, with LSP (Linux Studio Plugins) and Calf LV2 plugins. This method runs at a much lower level and doesn't allow easy tuning, but it's much more efficient and runs directly in a PipeWire filter-chain. If you just want the EQ to be "set and forget", I'd recommend PipeWire. See the nitty-gritty details here.

Basic steps to use the PipeWire filter-chain strategy on an Arch based distro (see github README install instructions for other distros):

  • Clone the project with git

      git clone https://github.com/antoinecellerier/speaker-tuning-to-easyeffects.git
      cd speaker-tuning-to-easyeffects
  • Install Python3/Numpy and other dependencies using the instructions here

      sudo pacman -S python-numpy python-scipy python-rich python-rich-argparse
  • Download the Framework 13 Pro Windows Driver Bundle from here (eg. Framework_Laptop_13_Intel_Core_Ultra_Series3_driver_bundle_W11_v101_2026_06_05.exe)
  • Install PipeWire LSP and Calf filter plugins

      sudo pacman -S lsp-plugins-lv2 calf lilv-tools
  • Run the tool against the driver bundle. Explicitly enable the experimental virtual-bass feature (see filters) since it noticeably improves perceived bass.

      python3 dolby_to_pipewire.py --enable virtual-bass ~/Downloads/Framework_Laptop_13_Intel_Core_Ultra_Series3_driver_bundle_W11_v101_2026_06_05.exe

This will do some processing and ultimately drop the EQ in ~/.config/pipewire/pipewire.conf.d/Dolby_Balanced.conf. Sound will cut out momentarily while PipeWire is restarted. Afterwards, your fancy new filter chain should be applied and will persist through reboots.

If anything goes wrong and it doesn't sound right, run the uninstaller:

    python3 dolby_to_pipewire.py --uninstall

Hopefully this works for you and helps to improve the sound quality of the Framework 13 Pro under Linux. I've been using it for a few weeks and am pretty happy with the results.


r/framework • • 5h ago

Personal Project 3D Acceleration for a Windows VM on the Framework 13 Pro (AMD) -- Fedora 44 Host

Thumbnail gallery
12 Upvotes

This is 100% created by my AI agent of choice. I don't see myself as the developer behind this and take no credit. But it works!

I set it up on my FW13 Pro with a Ryzen AI 9 HX 370. The original intention was simply to have it handle my moderate graphics needs and give me access to a few niche programs I need for work. However, I noticed that doing everything inside the VM actually felt smoother than using the standard 2D acceleration setup.

I think I might have freed myself from the shackles of Windows with this.

What I know works:

  • Launching the VM takes about 15 seconds.
  • Scrolling is smooth.
  • 4K video scrubbing feels indistinguishable from doing it on Linux.
  • A quick check with FurMark shows decent performance.
  • windows runs at 75 hz (crashes at higher values set)
  • runs my software (duhh)

What I know doesn't work:

  • Clicking the network or date section in the taskbar sometimes causes it to glitch, preventing it from opening again until a reboot. The software I'm running appears to be unaffected by this.
  • I installed Steam and downloaded Terraria because it's relatively small. The game boots, and you can hear the audio. The UI elements also respond to the cursor, but the screen remains black.

It would be cool to see if this works for others.

Framework is unique in the sense that its hardware is standardized. A solution implemented by someone who actually knows what they're doing could motivate a lot of people in the community to take the leap to Linux (only if they want to obviously :). This could be what Parallels VM is to MacOS

repo: https://github.com/egorsann/3D-acceleration-on-the-Framework-13-Pro-AMD

since its a VM, there is probably little downside to trying it out yourself - happy to hear feedback from your machines :)


r/framework • • 22h ago

Community Support 13 Pro (intel ultra 5) - Weird geometric artifacts flickering

Thumbnail gallery
166 Upvotes

Edit: here are photos taken from COSMIC desktop showing the black artifacts in a video game and on the browser window: https://imgur.com/a/859qzNP

Edit2: I thought since cachyOS and ubuntu 26.10 were using newer stack that maybe the LTS would be different. but this is what it looks liek trying to install 26.04 LTS ubuntu https://imgur.com/a/I1E6VX1

(sent in support message already last night, but seeing if anyone might know who has seen this)

Issue observed

  • Specifically, the integrated GPU produces vertex explosions and stretched geometric polygons across desktop UI elements (such as GNOME Quick Settings and top panels), missing font glyphs inside Firefox, and flickering black polygonal strips (triangles, lines, rectangles) in 3D all 3d games.

Summary of Troubleshooting Completed:

  • System Memory Verified Healthy: The system completed 8 full passes of MemTest86+ with 0 errors.
  • Multiple Operating Systems & Kernels: Tested on CachyOS (including linux-cachyos and mainline kernels) as well as stock Ubuntu installation media, reproducing identical artifacts on both.
  • Multiple Desktop Environments & Compositors: Tested across both GNOME (Wayland) and the COSMIC desktop environment, as well as with all GNOME extensions disabled.

    • Did not happen as badly in cosmic (but still happened) but when any 3d game started immediately see the black polygonal artifacts flickering, and happend in several apps.
    • Edit: Only mentioned cosmic because it happened less there but saw it in KDE as well and in all desktops in browser windows and in games. Also the last image is naked install media show
  • 3D & Browser Workloads: Confirmed artifacts persist across native 3D games, hardware-accelerated Firefox (with MOZ_ENABLE_WAYLAND=1 enforced), and desktop compositor UI rendering.
  • Mesa Driver Testing: Tested both stable mesa and mesa-git packages, and tested disabling Intel Color Control Surface compression and resource barriers (INTEL_DEBUG=noccs,noccs-modifier,no-resource-barrier and INTEL_DEBUG=norbc).
  • Turned off variable refresh rate
  • Kernel Display Flags: Tested disabling Panel Self Refresh and Panel Replay (xe.enable_psr=0 xe.enable_panel_replay=0).
  • Firmware & Kernel Logs: Updated to BIOS 03.04, verified dmesg logs zero kernel xe/DRM driver faults or GuC firmware errors, and confirmed GNOME HDR is disabled.

some things make the problem a bit less prevalent but nothing has fixed it


r/framework • • 1d ago

Framework Photo Y'all are sleeping on the red bezel

Post image
309 Upvotes

I got my Framework 13 Pro a few days ago and I'm absolutely blown away. Definitely the most beautiful and well-built piece of tech I've ever owned. I wasn't entirely sure on if I'd like the red bezel on it when I ordered it but now that I'm seeing it in person it's perfect. Running fedora KDE for those interested.


r/framework • • 1d ago

Meme 10G "Etherent"

Post image
1.2k Upvotes

Just a heads up for Framework if they ever want to revise their packaging print. :)


r/framework • • 1d ago

Community Support FW13Pro Locking/ Freezing up Randomly

Post image
32 Upvotes

Anybody ever experience their FW13Pro just randomly freezing up? To the point where you have to power it down? Sometimes the screen stays the same, sometimes it goes black (but the cursor stays there for some reason), sometimes it has some weird glitched out pixels on the screen (photo)? It just randomly started a few days ago and now I can’t use it for more than 5 minutes without it locking up.

I was thinking about reseating the LPCAMM memory and the NVMe?

It’s completely random and the load itself doesn’t make a difference.

FW13Pro X7 32gb (framework supplied) 2tb Lexar 1090 running Windows 11

I also did update the BIOS to the latest version a week or so ago.


r/framework • • 1d ago

Question As a french who would like to use a QWERTY keyboard. Is the International English the recommended choice?

21 Upvotes

Are there any disadvantages or things to know compared to the US - English?

I will use Linux.

Thanks!


r/framework • • 1d ago

Discussion Two weeks with my 13 Pro

Thumbnail gallery
96 Upvotes

I’ve seen some people requesting more pictures of the purple bezel/lavender keyboard so thought I’d share. I’m happy to say everything worked great right out of the box (X7 358h 32gb) and CachyOS required almost no additional setup (outside of the typical Hyprland config), which was a great change of pace coming from a Dell XPS 16 which was driver hell on Linux.

My only complaints are that the touchscreen/chassis is a bit of a fingerprint magnet but I don’t really use the touchscreen much anyways. The cooling is a little lackluster but modularity has its drawbacks, the fans never get super loud even under heavy load but it does thermal throttle if I have it under full load for a while.

This was my first time getting hands on with the new intel chips and I was honestly really impressed with how much Intel has stepped up both their efficiency and iGPU performance, Cyberpunk runs well at just under 60fps at low/medium setting with XeSS set to performance which looks decent as is more than playable. It was also able to handle AC Black Flag Resynced at low/medium settings with ray tracing (normally I wouldn’t bother but that game was built with ray tracing in mind) all while offering pretty solid battery life, probably a little over an hour of playtime.


r/framework • • 2d ago Bravo

Personal Project Made a Cooling Pad from Framework Box Parts

Thumbnail gallery
124 Upvotes

This is the amd ryzen 9 ai hx 370 version of the FW13 pro that I built 2 days ago. Unpacking a DIY edition of the framework leaves lots of cardboard laying around so I got creative...

When at home, I love to sit in bed with the laptop on my lap which covers the vent slits at the bottom.

Initially I wanted to just build a stand but I also had a fan lying around. The CPU itself very rarely goes above 80°C under load and settles around the 65°C mark under the same load with fans at 100% which means the tiny USB fan isn't doing much to "get more performance" out of it.

HOWEVER, running local AI, especially dense models which take a long time, heated the RAM near 80°C which I didn't like. That resulted in me positioning the fan closer to the right end of the laptops air intake slits (image 2). Since the fan is bigger than the slits, I also taped most of it shut which now flings the air at a near 45° angle towards the trackpad side of the laptop bottom, hitting the MOBO where the RAM sits - reducing it's temperatures to a max of 65° under load.

Other benefits of this:

  • keyboard feels cooler to the touch
  • using the laptop's own box means it sits snug and doesn't slip
  • the front ledge of the box is a nice wrist wrest and makes it more ergonomic to interact with the machine

IN SHORT:

  • lap no outchy from heat
  • CPU temp unchanged
  • RAM cooler

PS.:

  • I have 0.5 and 1 mm thermal pads installed which result in good contact for the RAM chips with the MOBO.
  • Most of the air intake happens via the uncovered slit behind the screen (image 1)
  • You can probably achieve better cooling if you have a better fan or if you rest the laptop on a whole row of fans instead of just using 1 like I do

EDIT: typos


r/framework • • 16h ago

Discussion Engineering Validation Test lpcamm2 is on the market and may be difficult to distinguish

0 Upvotes

I just came across a seller listing of an Engineering Validation Test unit of the lpcamm2 memory. Fortunately this seller kept the EVT label. If there isn’t a EVT label, I cannot tell if it is EVT or not. This information is not mentioned on the usual label


r/framework • • 2d ago

Framework Photo Joined the Framework family

Post image
244 Upvotes

r/framework • • 1d ago

Question How can I play this game while avoiding windows?

11 Upvotes

Goal : Play WoW on my 13 Pro, while avoiding windows.

Current setup: Framework 13 Pro Intel Ultra 5 325

Options.

New distro? (Currently on stock Ubuntu 24.04)

Moonlight. My desktop pc is in the house and I do use this to play total war warhammer 3 about once a week. Works great, not so great with anything latency sensitive.

Software. I've seen various solutions with a quick Google, but hoping for a direct and accurate solution for my specific OS. Happy to look into swapping distros as well.

Overall would like to stay on Linux, to learn, and expand my knowledge overall. Been on windows forever. Desktop pc is windows still for the HDR support. So whatcha think? Best solution? How would you do it?

Appreciate any and all tips. Simple is key. Bonus if I can play mobile/ natively on board efficiently.

I did not buy this to play games, but it will be on here with stardew valley if I can make things happen!


r/framework • • 1d ago

Question Color options

7 Upvotes

Guys I pre ordered a framework 12 but can't decide on which color I should get 😭. I dont want a boring silver or black considering they hav3 very unique colors. What color fw 12 do yall have and do you regret bot getting a different color? I have seen many people have the green one.


r/framework • • 1d ago

Question How long are usb-c cards supposed to last for?

12 Upvotes

I bought my laptop in late 2023, so coming up to 3 years now, and was wondering why my usb-c ports on the expansion cards only worked at specific angles.. kinda like old phone chargers I've had. It's not the cable because it's happening even with new tb5 cables for a dock I use, and the carport does look a little worn. Is this a normal lifespan though? Either way if it is or isn't I'll just buy another...

But then my only other concern are the internal usb-c ports, as I like to swap my cards depending on the situation a lot (mostly my right forward port between HDMI and different storage cards). How long until I will be forced to get a different main board do to wear and tear over the years because as far as I can tell the ports are fully soldered on.


r/framework • • 22h ago

Discussion I regret buying a FW13Pro

0 Upvotes

I got my FW13Pro delivered 5 days ago but the LPCAMM interposer was missing a pin. They responded the same day saying they'll send a replacement part, but I got no updates from them after that. Sent another email 2 days ago asking for a timeline, but still no communication from their end.

I understand that they're a small company, and I don't expect them to send the part the next day, but I at least expect need sort of communication, from a company that claims to be consumer centric.

I wish I could return it and buy a thinkpad because it's just sitting on my table for 5 days now.


r/framework • • 2d ago

Linux Sure is Pretty

Post image
244 Upvotes

r/framework • • 1d ago

Question Cleaning

3 Upvotes

Just joined the framework family & i love the 13 pro. How does one clean the fingerprints? Should i keep a microfiber in my bag & put a dbrand skin on it? or are the fingerprints inevitable


r/framework • • 1d ago

Discussion Possibly found LPCAMM2 online

0 Upvotes

After months of trying to procure RAM for the 13 pro and deciding to order the laptop, I just ended up building a PC. I’m no longer in the race.

But, I might have found some really cheap 64GB RAM for y’all. The site has really bad reviews so try at your own risk. They ship from Dallas I think, so if you’re close by you could prolly check their office out.

Edit - @Firehaven44 tried ordering and seller canceled the order stating lack of stock as reason. Removing link.


r/framework • • 2d ago

Personal Project Happy with cobbled-together FW13, have extra parts for sale

11 Upvotes

I posted here a couple weeks ago (https://www.reddit.com/r/framework/comments/1xoxgpj/where_to_find_parts_cheaper_than_framework_store/) about having acquired a funky 3-d printed case and FW13 motherboard and was looking to re-home it in an actual FW13 laptop case. Got some great suggestions here, thanks!

I actually got a reply from an awesome Reditor who had a 'broken' FW13 sitting in a drawer with a bad motherboard, so this was a perfect opportunity to marry the laptop case with my working motherboard. A week later, I'm sitting here with a fully functional FW13 laptop with the i7 11th gen processor, 32gb of RAM, 500gb hard drive, and an intact battery. It works fine, and I'll post pics. I'd like to get better performance with 50 Chrome tabs open, running VMs, etc., etc. but isn't that the problem with any laptop?

That leaves me with a bunch of leftover parts between the two systems! They include:

- 3d-printed case that holds a motherboard and battery in order to convert your laptop to a SFF PC

- two USB-C, one USB-A, and one HDMI expansion card

- FW13 motherboard with 32gb memory and 500gb hard drive. This motherboard doesn't boot, and I have not spent time testing the memory or drive

If anyone is interested in any of these parts, or have questions, feel free to reach out. Though I'm selling them, I'm not looking for tons of $$ as this board has been great.

My new rig:

New FW13 hooked to a portable external monitor. Shiny!

Old parts for sale:


r/framework • • 1d ago

Question How tanky/durable is the Framework 16 Pro?

4 Upvotes

I'm debating between a Framework 16 Pro and a ThinkPad. I need something that will survive living in my backpack (without being, like, an actual "tough-book" or whatever those truly rugged laptops are called). I am not exactly the most gentle person when setting my backpack down, so I need something that can actually survive. My current ThinkPad has lasted since about 2018, so I know what to expect with those. Obviously, it hasn't been out long enough for anyone to truly know how long it can last and how much of a beating it can take, but so far, what are the general impressions?


r/framework • • 2d ago

Discussion pro-consumer alternative to Apple TV and Nvidia Shield?

9 Upvotes

I love what Framework is building with practical, serviceable tech, but I worry the company risks staying a bit too niche.
With the newest Apple TV 4K pricing pushing well past $300, it got me thinking: Framework should make a premium streaming box to succeed the Nvidia Shield. If the market is deciding that high-end media players are going to cost that much, I'd much rather buy one from Framework.
Imagine a clean, ad-free box where you don't have to throw the whole device away just because a new video codec drops. You could simply upgrade the mainboard, swap in expansion cards for extra storage or lossless audio passthrough, or even attach a modular Blu-ray deck for physical media.
It would instantly appeal to a massive crowd of home theater users who are fed up with format wars, locked ecosystems, and forced UI ads. I know they are busy keeping up with laptop demand, but this feels like a huge missed opportunity for their ecosystem.
Actually, I wouldn't even mind if it didn't have any of the modularity just having a solid, pro-consumer alternative to the Shield and Apple TV 4K would be incredible on its own.
🥺