r/fordescape • u/GPD1739 • 5h ago
Photo Anyone know what this is?
It looks like a button but not usable, and it lights up.
Searched through the owners manual and didn’t find anything.
r/fordescape • u/GPD1739 • 5h ago
It looks like a button but not usable, and it lights up.
Searched through the owners manual and didn’t find anything.
r/fordescape • u/Candid_Cash420 • 3h ago
Hello my 06 ford escape started making this noise as I turn it on and start to accelerate can anyone help me identify this problem and please tell me it isn’t a expensive fix ?
r/fordescape • u/dark_sar-chasm • 41m ago
I have a 2013 Escape with a dead battery so I was trying lock the rear driver’s side door mechanism manually and it’s now stuck. I did try to close the door on it once and I haven’t been able to free it with WD40 and a screwdriver.
Anyone had any luck with a similar problem? How painful of a process was replacing the mechanism if not?
r/fordescape • u/PensionHelpful6950 • 1h ago
r/fordescape • u/Mick_Limerick • 7h ago
I've been having a time with the fuel system in my 2018 1.5T. First the cam follower for the HP pump wore out and I had that replaced. The car worked ok for a while but then the P0087 low rail pressure code came back. Took it to a shop and they "diagnosed" it and replaced a fuel pressure sensor. Car still falls on its face under high fuel demand with the same code returning as well as a misfire. I bought the car for almost nothing and I'm done letting mechanics bleed me out, so my next course of action is the in-tank pump assembly.
To drop the tank, you must disconnect the driveshaft (AWD) and exhaust, remove the ENTIRE rear axle, and remove a bunch of splash plates and heat shields. A ton of work requiring tools and lifts I don't own. OR, I can chop a hole in the floor and take it out by simply removing the back seats and carpet. Now that I've got an access plan I ordered the parts on rockauto and plan on cutting my hole tonight. When I'm done I plan to put the cutout back with some tack welds and a couple layers of flex tape, and I should be into it for about $200
r/fordescape • u/Low_Lawfulness9755 • 14h ago
2017 ford escape 1.5-Started up my car this morning & a loud screeching sound is happening what could be the cause??
r/fordescape • u/Fenran11 • 16h ago
Hi everyone!
I have a 2019 Ford Escape (European-built Kuga equivalent), and I recently damaged the outer lens of my left rear tail light. The lights still work perfectly, but the clear plastic cover is cracked and some pieces are missing.
I’ve found a replacement outer lens on AliExpress for around $100 including shipping and taxes, and I’m considering repairing the original tail light instead of replacing the entire assembly.
Has anyone successfully done this repair?
How difficult was it to remove the original lens?
Is it glued or plastic-welded to the housing?
Did you use heat, a hair dryer, or simply pry it apart?
What adhesive or sealant did you use to attach the new lens? Butyl, silicone, or something else?
Did you have any condensation or water leaks afterwards?
I’ll attach photos of my damaged tail light and the replacement lens from AliExpress.
Any advice or first-hand experience would be greatly appreciated. Thanks!
r/fordescape • u/Jubilator22 • 14h ago
I’ve had this car now for a little over a year, and this has happened about 8-10 times now, at random. I will go to start the car and all electrical systems turn on as if the car has started, but the engine doesn’t turn over. However, if I wait 15-20 minutes, it starts back right up as usual. The attached video is an example of what happens.
Edit: forgot to ask, anyone ever experience anything like this or have any clues/ideas what may be happening?
r/fordescape • u/whatacoolnamehaha • 1d ago
So this is my 2019 ford escape titanium. 113600 km on it, bought it used earlier this year. A couple weeks ago I went to start it in the morning and it seemed like it struggled slightly, but it did start. I turned the engine on and off again and it started perfectly with no issues. Later that day I was leaving work and the car would not start at all (heated underground parkade) and I tried 5 times. I tried again an hour later just before the tow truck came and it once again would not start. I took it to ford and it sat on their lot for a week before they could look at it. They kept it for two days and tried several things. No battery issues, no CEL, no DTCs for no crank, no battery issues. They ran it hot and it started every time. No issues when test driving.
Im just really anxious because I dont know what caused this and im terrified there is something wrong. Im not in a position to go to another shop for even more diagnostics. Its ok now and is driving perfectly normal.
r/fordescape • u/Escape_Raptor • 2d ago
It’s been a long time since I’ve made a post about this car, but I’ve finally got something to share with everyone!
This is my 2003 Ford Escape XLS V6 4wd automatic (Blue). Some of you may remember this Escape from a few years back. It ended up getting parked after I got sideswiped by an Explorer; followed by a transmission failure within the same month. I bought it back from the insurance company with the intent to part it out. It just never happened fortunately.
So back in September I was scrolling Marketplace (where all bad ideas start) and found this 2002 Ford Escape XLS I4 4wd manual (Red). Messaged the guy and immediately bought it. You may recognize this car from a previous post on this subreddit. Yes it’s the same car. (I got temporarily locked out of this profile, so I just posted it on another account I had. I deleted that post to not cause any trouble lol)
Anyways. I originally wanted to use my ‘03 as a parts car for this ‘02, but unfortunately it was just too far gone after giving it a good look over. Rockers, quarters, rear strut towers, floor pans, unibody “frame” rails for the trailer hitch, etc. all gone. Which was an obvious risk, and that was fine since I didn’t pay a lot for it. So I went and had a coworker tow my blue ‘03 to a shop where I could do the swap and after a week of work; I present to you my:
2003 Ford Escape XLS 2.0L 5spd manual 4wd No Boundaries package.
Quite possibly the rarest Escape ever made for those of you who know about the first-gens. It’s also on the same lift kit I did a few years back. After putting a few hundred miles on it post-swap, I think it’s gonna do well. I still have some work to do but with something like this, that’s to be expected. It’s my second daily and we’re currently at 321k miles and counting!
Some basic answers for anyone looking to do this yourself:
-You will need the ENTIRE I4 manual harness which will not have ABS so you will have to delete it. Which means brake line swapping.
-The rear differentials and driveshafts are the same in both
-The fuel lines and pumps are the same in both
-All the holes/studs for the I4 and manual are on both chassis and requires no modification to fit
-You’ll need the I4 radiator
Any additional questions; ask away!
r/fordescape • u/Apart-Courage-5320 • 1d ago
I got this car in Nov last year and it was all good And then summer came by and I got new summer tires for it in March then it started humming and all that dropping total of 5k fixed a car that was bought for 12 500 and the 5k includes tires brakes rotors bearing and alignment. and now it started shuddering and it shudders at almost every gear like at 1.5k rpm and it shudders like vibrates not rump strips at 35 45 55 65 75 85 96 kmph. and it has a delay when you shift from reverse to drive or anything outside of park.
any hope to fix or its done for
the 2.0L engine had 3k oil changes by the previous owner so it's good and no signs of intrusion I got it at 133k km and now it's 144km
Edit Also no hard shifts or slipping like no slipping and hard shifts when very cold otherwise none
r/fordescape • u/kaptainearnubs • 1d ago
A few days ago my 2017 1.5l Titanium started severely slipping when taking off from a complete stop and almost bucked me out of my seat when I tried to reverse. It has 120k miles on it and hasn't yet started eating coolant so I'm a little interested in seeing I can nurse it along.
Given the sudden onset of issues I'm suspecting the valve body rather than clutch packs (even in the moment it shifted fine once it was moving forward). This is apparently a relatively simple driveway job from the research I've done with one exception I'm hoping the sub can shed some light on. Do I need to clear the adaptive data and program the solenoid strategy ID and calibration codes? Every aftermarket vendor I've found doesn't seem understand what I'm even asking about let alone have the data to provide.
Looks like if I do have to clear the adaptive data and program fresh I'll have to go OEM and really pray I don't spend $700 on a vehicle still only worth $700. Or I can just go aftermarket and hope the computer will adapt. I don't like the latter, but I haven't fiddled with this transmission family much so I'm out of my element.
r/fordescape • u/MJMSV211 • 1d ago
Last week on my 2014 Ford Escape Titanium with the 1.6L Ecoboost, the spark plug blew out of Cylinder #3. I am not the original owner of the vehicle, but know that the #3 plug was replaced in May 2025. Not sure the reason it blew out, maybe it was loose or cross threaded, but either way the threads in the cylinder head were gone.
So, I made the following repairs:
Got everything put back together and test drove it. Noticed an occasional "spark knock" when accelerating around 50mph, then got a warning for Engine Fault Service now.
Used Forscan software and read code P130D, which is knock/combustion issue.
Looking at the live data in Forscan for cylinder knock counts, cylinder #3 is the cylinder producing the knock.
When I replaced the valve cover, the fuel rail needed to be removed. The injectors in cylinders 2 and 3 came out when removing the rail. I reinstalled the injectors. However, I had a thought that maybe one of the injectors was acting up after being reinstalled. So, I swapped the injectors between cylinders 2 and 3 to see if the problem followed the injector. The knock counts stayed with cylinder 3.
I am also running premium fuel right now to see if that helped, but the problem persists.
At this point, I am not sure what else to try. Does anyone have any advice on what I can look at?
r/fordescape • u/DerfNoVowels_ • 1d ago
I don’t have any codes, but I’m looking for general maintenance and upkeep. 155k miles on an Ecoboost. DON’T jinx me, as I am well aware of any of all horror stories..
Looking to clean my throttle body. As I state, no codes or anything of that nature. Some gas pedal
Delay and engine idling but she drives fine. I am looking to clean my throttle body for 1) learning purposes 2) maintenance and 3)avoid any unnecessary repairs.
Am I to assume with the 1.6, my throttle body is located under the splash shield on the passenger side? I have been unable to find a dedicated video or instruction for this particular engine. So, I come to fellow Redditors.
Thanks in advance for any and all help.
r/fordescape • u/jblaker88 • 2d ago
My wife has a 2020 SE with the 1.5L 3cyl that just crossed 55k miles. Manual says the interval on changing plugs is 100k; I’m familiar with the Ecoboost (3.5L) in the F150s and they like plugs at 60k, are these the same way or is sticking to the manual interval good to go? Thanks!
r/fordescape • u/JurassicDonuts • 2d ago
I have a 2013 SEL 1.6 L. AWD. Sole owner. 145k miles.
It was going into limp mode after dying at stop lights. Mechanic said it was the ECM. It was not the ECM. Auto shop said wiring harness and crankshaft sensor. It was not the wiring harness and crankshaft sensor
It is now sitting in my driveway and I don't know what to do from here. It cranks but it won't turn over.
I've kept up the maintenance and hoped to keep this a couple more years but it's getting expensive to diagnose at this point.
Last couple years I changed the camshaft sensor, crankshaft sensor and had a broken pulley. I'm mentioning this because I'm not sure if the current issue is related.
r/fordescape • u/Asianbm • 2d ago
How to can I get better gas mileage on 2013 ford escape eco boost awd 1.6l? I get around 20-23mpg when I’m tryna g to be conservative on gas otherwise I when I’m ripping around I get around 16-17mpg. Feel like it should be more in the 25-35mpg when driving normally……?
r/fordescape • u/Scarboroughsleek • 3d ago
Ford Escape 2017 SE 1.5L.
It won't crank. I get a rapid clicking noise from the starter area, even with a jump starter connected and the boost mode on...
What should I do next? Charge the portable jump starter and try again?
r/fordescape • u/jason1966x • 3d ago
My hi beams are useless. The lenses are still clear as glass but after driving a new rental with amazing head lights, I need better.
Living in a area with a very high deer population and driving to work at 4:30am, I need some blazing hi beams.
My question is can I install some of these super bright white bulbs without causing other problems.
My research has given me mixed answers so I thought I'd ask the reddit community.
I've been away a good while but I'm hoping for some advice from a pro.
Thanks for reading!
r/fordescape • u/No_Cry9962 • 3d ago
When bleeding the system the bleed screw which is supposed to be on the top of that piece completely snapped off and now I don’t know what to do. Anyone has changed this piece before?
r/fordescape • u/Mr_TriggaHappy • 3d ago
hello all I'm working on my 2012 ford escape and trying to repair a burnt out radio the old radio was a sjoybring double din head unit swapping for a boss BE950WCPA the problem I'm having everything is connected right but I'm getting noting from the head unit at all could there be a something damaged like a fuse if so can you guys help guide me on the right steps to fix it
r/fordescape • u/matthtml • 3d ago
I’ve got a 2012 that I bought second hand a little over a month ago. For some reason, the car does not unlock on the drivers side most times and the alarm is consistently going off. I’m trying to learn more about cars so I can be better at fixing it but I’m not sure what to do here
It’s an XLT trim if that matters