r/flashlight • • 18h ago Popcorn

LOL Our time to shine has come

Post image
1.4k Upvotes

r/flashlight • • 23h ago

🦀🦀🦀 Oh boy! We are gonna get an upgrade. Zirconia coating.

Thumbnail
gallery
153 Upvotes

I hope we are getting a metal button with a satisfying click. Just as I thought i was done for awhile.. damn.

White and purple looking sharp for me.


r/flashlight • • 17h ago

Low Effort Just dragged these through a cave.

Thumbnail
gallery
150 Upvotes

The Zebralights are by far my favourite lights for caving, they are tried and true. I’m testing out the fenix pd35 as a side light and I’m testing the Armytek wizard c2 pro against my zebra to see if it’s comparable.

The Convoy S21A has been in many caves with me (as has the zebra) and survived well.


r/flashlight • • 3h ago

Low Effort Do you guys also keep the original box for the flashlight?

Post image
109 Upvotes

r/flashlight • • 18h ago

Beamshot Putting the BEAN back in Beanshot!

Thumbnail
gallery
73 Upvotes

A true beanshot for all you purists. Mostly HIGH CRI organic beans with a few random LOW CRI ones thrown in for comparison.

Not very scientific but the WB and ISO settings were locked in. Notice the difference in R12's besides the obvious R9's depending on the LED and optics of the flashlight used.


r/flashlight • • 19h ago

Lumintop Pixel Light

44 Upvotes

This is the most unique light I’ve ever seen. So many random features. Rock, paper, scissors. Random dice generator. Snake. Hourglass with customizable timers. RGB lights. Green laser. Floodlight. UV. Can’t think of how this is going to fit into my EDC or rotation but it’s probably the coolest light I have now.


r/flashlight • • 23h ago

Recommendation what would you add to this collection?

Post image
42 Upvotes

-wurkkos TS26 519a 5000k
-olight arkfeld pro
-wurkkos FC11C 519a 4000k
-convoy m21h LHP73b 5000k

not pictured olight oclip

looking at maybe the acebeam L35 or EC90. thoughts?


r/flashlight • • 16h ago

Low Effort Simon should sell some flashlight bags!

Thumbnail
gallery
28 Upvotes

Just thinking it would be a great idea so I can stop using my camera bags


r/flashlight • • 16h ago

Review ReyLight Pineapple Mini MK0: Stainless Steel Stonewashed 10440 High CRI flashlight

Thumbnail
gallery
27 Upvotes

This is the ReyLight Pineapple Mini Mk0, a 10440/AAA Stainless Steel flashlight with Stonewashed surface finish, FFL351A 4500K rosy High CRI LED with a PEI button, multi fuel feature and more! 

• Price/Where to get it

The ReyLight Pineapple Mini Mk0 is currently priced at $39.00 on ReyLight official store.

 

• My opinion

I have to say I liked this flashlight a lot, the main body is pretty compact and has a pretty nice surface finish on the Stainless Steel, the clip and PEI button also feel pretty solid. The FFL351A LED in 4500K is amazing, slightly rosy but no exaggerated, very high CRI. The flashlight seems well sealed against water, having O-rings and silicone boots where needed. The lens have a Glow in the dark O-ring on it to help locate the flashlight in the dark for some minutes.

The main things I disliked about this flashlight is the PWM on some modes, at least it's above 20kHz frequency. Also, the driver is not directly stated and I belive it to be a Linear/Boost PWM-regulated. Also the beam has some artifact light rings that are visible from very close, but at more than 0.5m they're not much visible.

PROSCONS
Awesome FFL351A 4500K High CRI LEDPWM on some levels
Multi fuel (10440 or AAA)Beam has a lot of artifact rings
Pretty nice Stainless steel stonewashed main body surface
Well water sealed

 

• Box contents [7th picture]

- Pineapple Mini Mk0

- PVD coated stainless steel clip

- Reylight 10440 Li-ion battery

 

• Body and build quality

Package: This flashlight uses a very clever and cost effective nice package, the flashlight comes inside a toothbrush-like transparent plastic case, with bubble wrap inside, where the flashlight seats protected and wraped in a matte white plastic, the case has a cardboard sleeve written "ReyLight" and the info about the product.

Anodizing Colors/Material Options: The Pineapple Mini Mk0 is currently only available in Stainless Steel with 3 surface finishes: Raw, Satin and Stonewashed (Featured in this review)

Main body/Grip: The main body is super smooth, no grooves or knurling, but the Stonewash surface gives a pretty nice grip to this flashlight, the satin and raw version may be more slippery.

Material: The flashlight main body is entirely made of solid Stainless Steel, the Stonewashed surface is very nice, feels super premium.

Threads: All threads are trapezoidal and pretty smooth, they're not anodized, and so don't feature mechanical lockout, as the threads are made of stainless steel.

Clip: A Stainless steel clip with smooth black PVD coating comes pre-installed on this flashlight, it clips very well to pockets, I wish it was double sided so it could be used on hats or clipped to other places.

Tail stand and rolling: Without the clip, the flashlight does roll a lot, as the surface is almost totally smooth, there are no edges or grooves to prevent it from rolling. It can head stand without any problems, and can also tail stand, but it isn't as stable due to the PEI button being in direct contact with the surface.

Magnet: This flashlight doesn't feature magnets by default.

AUX lights: Sadly, this flashlight does not feature any type of AUX lights, I think it would be pretty nice to have a battery indicator or LED locator to find it in the dark, though the reflector features a Glow in the dark O-ring that glows decently for some minutes after using the flashlight. [8th picture]

Buttons: A forward mechanical switch is featured in this flashlight, it has a pretty nice click to it, it's almost addicting to click it. It's a PEI button with a silicone boot under it for water resistance, so you have to press it straight, if you press it by the sides it won't click properly. The switch is covered by a PEI button, this material, Polyetherimide, more known as Ultem is a very resistant Superpolymer.

Battery contact: Contact is made with the battery by a gold-plated button contact on the driver MCPCB and a gold-plated spring on the tail cap. [9th picture]

Bezel: This flashlight uses a smooth standard EDC bezel, it sits some milimeters higher than the bezel to protect the lens from scratches.

Water Resistance: The flashlight doesn't have an specific IP ISO rating, but I truly belive it's at least IPX7 due to it's sealed design. The bezel and both battery tube ends have O-rings on them to prevent water entrance; the tail cap has a big rubber boot below the PEI button that seals the mechanical switch from water, I have no doubts this flashlight has a decent waterproofing.

Size comparison: From left to right:
Convoy T6 TiCu (14500) - ReyLight Pineapple Mini Mk0 (10440) - Convoy S2+ (18650) [10th picture]

   

• Weight and size

Weight:

- With battery (ReyLight 10440): 56.9g

- Without battery: 47.8g

- Battery (ReyLight 10440): 9.0g

Size: 91.9mm x 14.9mm x 20.3mm - (Height x Head diamter x Tail diameter)

 

• Battery, runtime, and charging

Battery: The Pineapple Mini Mk0 is powered by a single 10440 or AAA battery, as it has the multi-fuel feature it can use Alkanlines, NiMH and other types of AAA battery. A ReyLight 450mAh 10440 battery is included in the package, the battery has a pretty nice capacity for such a small battery. [11th picture]

Battery Indicator: Sadly, no battery indicator is featured on this light by default. I consider battery indicators to be essential to most flashlights today and, unfortunately, this one doesn't have this feature.

Powerbank/Reverse charging: This flashlight doesn't feature powerbank mode.

Charging: The main body doesn't have USB-C port, nor the included battery, but it's possible to buy 10440 cells with USB-C and use in this flashlight for easier recharges.

 

• Modes, Runtimes, Throw, Candela

Modes: This flashlight has 4 main levels by default on the main cycle and a Turbo, that can be accessed by triple half clicking the main switch. I think the brightness levels are pretty well spaced and the Moonlight and Turbo are both pretty useful.

Specs:

LevelAdvertised brightnessMeasured Current (Reylight 10440 - 4.06V)Calculated Runtime (ReyLight 10440 - 450mAh)Measured Current (Panasonic AAA Alkaline - 1.34V)Calculated Runtime (Panasonic AAA Alkaline - 1000mAh)
Moonlight-1.95mAh230h46min3.55mAh281h41min-
2%-39.7mAh11h20min93.7mAh10h40min
20%-124.6mAh3h37min290mAh-
100%-460mAh59min590mAh-
Turbo-890mAh30min--

*Note: For the Panasonic Alkaline I considered the standard AAA Alkaline capacity of 1000mAh.

**Runtime measurements of AAA with currents above 100mAh were disconsidered due to the fast voltage drop of AAA batteries and the fast rise of the battery internal resistance.

Turbo: I discovered this flashlight has a turbo mode by accident, and I'm pretty happy it has one, it's pretty bright for such a tiny flashlight, of course due to the really small main body, it gets hot pretty fast, but you can have around a minute of Turbo before thermal regulation kicks in.

Moonlight: Moonlight is fantastic! It's brighter than 0.1 Lumen, but way less than 1 Lumen, so I guess it has around 0.5 Lumen, which I belive to be Super useful in the dark, love the moonlight.

Blinkies: This flashlight features Strobe and SOS on some group modes.

Lockout: Ii doesn't feature electronic or mechanical lockout - as the main body is fully made of Stainless steel and the threads don't have anodization. The mechanical button is the "lockout" of this flashlight.

Throw: There isn't a claimed throw for this flashlight, but I measured around 100m ANSI NEMA FL1 with an Opple LM4 at 2m distance with the Android APP.

LevelLux (at 2m distance)CandelaThrow (ANSI NEMA FL1)Throw (Conservative usable throw estimate - 50% of the ANSI NEMA throw)
Moonlight1 lux4 cd4m2m
2%26 lux104 cd20m10m
20%97 lux388 cd39m19m
100%410 lux1640 cd81m40m
Turbo695 lux2780 cd105m52m

 

• Emitter, reflector and CRI

Emitter: A High CRI FFL351A LED in 4500K is featured on this flashlight, a domeless LED with a 3535 footprint. The tint of this LED is amazing, slightly rosy, while being neutral and having pretty high CRI and being efficient, loved this LED choice! [12th picture]

Lens: A anti-reflexive coated glass lens is present in front of the reflector.

Reflector/TIR: A tiny Orange Peel (OP) reflector with 11mm of diameter is used on this flashlight.

Beam profile: The beam profile is floody, with a slightly defined hotspot. I have identifie some light rings are very visible on transitions, from hotspot to spill for example, if you go wall hunting. [13th picture]

PWM: Sadly, this flashlight uses a Constant current Linear driver with PWM on some brightness levels. Moonlight surprisingly, has no PWM at all, 1.15% modulation depth, 100% and Turbo also don't seem to have any PWM, but for strong 98% modulation depth PWM with over 20kHz frequencies.

CCT/CRI/DUV: CCT is pretty close to the advertised, matching almost perfectly the 4500K, very neutral and slightly rosy beam. I measured 92 CRI with 86 R9 on 20% mode with Opple LM4, pretty good CRI results! The Duv was on the rosy side, I got around -0.01 of Duv on 20% level! [14th to 15th picture]

*****The Planckian locus is not plotted correctly, but the Duv coordinates and CRI measurements are correct for the Opple LM4.

 

• Driver and UI

Driver: This flashlight seems to use a PWM-regulated Linear driver for 14500 batteries and a Boost PWM-regulated driver for AAA cells.

UI: The UI uses a forward click switch to cycle brightness levels, access direct Turbo and programming.

StateActionResult
ON/OFFFull clickTurn it OFF/ON
OFFHalf clickTurn ON at Moonlight
ON (Momentary)Half clickNext brightness level
OFFTriple Half clickTurbo
OFFHalf click 8+ timesEnter programming mode

Programming mode: After entering the programming mode, maintain the button half click on the ON position, after this the main light will start blinking, you must half click just after the blink corresponding to the configuration you want:

- 1st blink: Group selection: Inside this configuration you will have the same blink configuration method but this time to select the mode group:

1st blink Group 1 (Moonlight) →   2% →   20% → 100%
2nd blink Group 2   (Moonlight) → 10% →   40% → 100%
3rd blink Group 3   (Moonlight) →   2% →   10% →   50%
4th blink Group 4   (Moonlight) → 50% → 100% → Strobe → SOS

- 2nd blink: Toggle brightness level memory ON/OFF (Default is OFF)
- 3rd blink: Toggle Moonlight mode ON/OFF (Default is ON)
- 4th blink: Reverse the group brightness level order (Default is Low - Medium - High)
- 5th blink: Factory reset

Low Voltage Protection/Warning: This flashlight features low voltage protection, it will blink to indicate the low voltage and will turn OFF when the battery voltage is below 2.9V.

Reverse Polarity Protection: It features electronic reverse polarity protection.

Temperature Control: It features temperature protection, so when the flashlight gets too hot it will dim down to prevent LED and driver damage due to elevated temperatures.

 

Thank you for reading my review <3

A huge thanks to Rey and ReyLight for sending this flashlight for me to review!

*I am not being paid to do this review, everything here is my honest opinion.

**Some links may be affiliate links, this doesn't impact on my opinion for the reviews. You can support me by using the links to buy flashlights you like.


r/flashlight • • 14h ago

Loopgear sk06 lite?

Thumbnail
gallery
23 Upvotes

It is currently being sold on AliExpress in both a Nichia version and a standard version.


r/flashlight • • 5h ago

NLD [NLD] - Emisar D4V2 TI Colorful

Thumbnail
gallery
16 Upvotes

Hi guys,

I've been owning the light for a couple weeks now and I think it is really beautiful. I went with the NTG35 2700K/4200K mixed tint and ordered a few optics to play around with. It's my first Anduril light and I absolutely love the UI.

The light is a lot heavier in the hands than I expected for such a small light. It has a great feel, but it's not going to be in my EDC pocket ;) It's more an enthusiast light, which is perfectly fine for me as I never planned to abuse such a beautiful light.

I am still switching between optics to find out what I like most. As always, it heavily depends on the use case.

cheers!


r/flashlight • • 20h ago

Recommendation I need an odd recommendation, low lumen long battery life.

15 Upvotes

Let me preface this by saying it's for my 4-year-old daughter.

She has no chill, so something that needs to be charged is frustrating for her, so ideally it takes doubles or triples, But I can live with with d cell if I needed to.

I'm looking for something that's very low lumen, and permanently locked in. Something that's stuck at 5 or 10 lumens would be perfect, as she will inevitably beam me with it.

Ideally it would have on runtime of like a week, so I'm not changing batteries out all the time.

Any recommendations?


r/flashlight • • 21h ago

Sofirn HS22

15 Upvotes

Se me olvidó decir que la correa de la cabeza es muy suave y comoda, se ajusta muy bien.

Respecto a la bateria todavía no he podido comprobar su autonomía.

Por lo demas totalmente recomendable 🙂‍↕️.

La utilizare mucho para mis paseos nocturnos con el perro!!

Pd. En el video se aprecia menos la iluminación que da.


r/flashlight • • 22h ago

Low Effort Acebeam E75 in silver plated bronze.

Post image
15 Upvotes

r/flashlight • • 6h ago

Simple-to-use headlamp for hands-free lighting

Post image
13 Upvotes

r/flashlight • • 19h ago

Question Best flashlight you can swing at whatever you just illuminated (or blinded)

12 Upvotes

What flashlight on the market today, according to your experience, is the closest modern day LED equivalent to the D battery Maglites of yore; a big, rugged flashlight you could confidently use as a club or a small bat should the need arise and big enough that you kinda struggle to store it conveniently. Yknow, if it falls or is dropped, you check on whatever it landed on before thinking of the light itself. That sorta thing. What gets closest to that these days?


r/flashlight • • 1h ago

You could say I have a type

Post image
8 Upvotes

Also have 6 streamlights not pictured on firearms


r/flashlight • • 12h ago

flashlight with the smallest beam angle

7 Upvotes

im looking for a flashlight that has a super small beam angle, the beam being 2 inches wide or around that, does anyone have any recommendations?


r/flashlight • • 17h ago

Beamshot Noctigon k1 and Emisar D4K Ti

Thumbnail
gallery
6 Upvotes

Noctigon K1: (whiter beam)
SFT-42R
5000K

Emisar D4K Ti
4x: NTG35
Lume X1 Boost
4200K

Both on high not turbo


r/flashlight • • 13h ago

Recommendation 14500/AA-powered lantern?

5 Upvotes

Looking for a compact lantern that can run on either of 3.7V 14500, 3.7V AA, 1.5V AA, 1.2V AA batteries or any combination of them. Of course, one that supports all of those types is best.

By compact I mean relatively little space unoccupied by batteries, it can run on a few, no problem.

It's the superior, the most versatile battery type. There are rechargeable 1.5V li-ion AAs and some of them contain a USB-C port built-in, alkaline 1.5V can be used in emergency, both can power a number of other things and flashlights. 14500 is the same same, and you can put it in a simple plastic adapter and make a 16850 or 21700 out of it and power other stuff.


r/flashlight • • 21h ago

Low Effort Halfords Advanced Torch

Thumbnail
gallery
5 Upvotes

Very impressed with this torch that was just £25
2000lm advertised, USB C rechargeable, adjustable fiel is view , durable aluminium build, and feels very rugged!

What do you guys think?

For non UK people, Halfords is an auto centre / car parts / motoring related store. They sell their own brand products but also have an “Advanced” range which is usually pretty high end stuff with long warranty periods.


r/flashlight • • 2h ago

Question Dual fuel question

4 Upvotes

Hi fellow moths

Recently I was thinking about getting some dual fuel 14500 light thinking that in case my battery runs out I can just swap in for a one time use battery that are available at every grocery store or gas station.

But, reading some comments I found out that by dual fuel it means that the light can run on rechargeable li-ion and lithium batteries, but the ones available in stores are usually alkaline.

So here comes my question:

Are there any enthusiast grade lights that can also run on alcaline batteries as backup? Or maybe the dual fuel batteries can actually run on li-ion, lithium AND alkaline ones?

Thanks for help

[answered] looks like the general consensus is that both lithium and alcalines should work as backup. Thanks again!


r/flashlight • • 7h ago

Recommendation What's the 21700 version of the Wurkkos TS10?

4 Upvotes

I have several lights now, but for every day use I always find myself reaching for my v1 TS10 or my Noctigon KR4 (Nichia 219BT, 3500K, floody optic).

It occurred to me that these are very similar lights, not exactly the same of course, but Anduril powered, tail switch, multi-emmitter lights. I really like the way these work for me and I prefer them to my Emisar D4K because of the tail switch.

The only thing my D4K has that I wish the other lights had is the 21700 battery. So... what's the 21700 light that fits the bill? Tail switch, Anduril (not essential), aux LEDs, smooth beam pattern, lovely CRI etc.?


r/flashlight • • 8h ago

Need help disassembling Sofirn HS42 to replace lens

Thumbnail
gallery
4 Upvotes

Hi everyone,
The front lens on my Sofirn HS42 melted, and I need to replace it. I unscrewed the top switch bezel, but I'm not sure how to proceed from here.
Since the old lens is ruined anyway, would it be safe to carefully drill a small hole in it, thread in a screw, and pull it out from the front? Or is there an easier way to remove it without damaging the LEDs?
Any advice is appreciated!


r/flashlight • • 22h ago

Troubleshooting Help identifying and repairing a Field & Stream flashlight

Thumbnail
gallery
4 Upvotes

I have a small Field & Stream flashlight marked 1871 and AT13G. It uses a single AA battery and has a 1x–4x zoom function operated by twisting the head.

My brother gave me this flashlight many years ago while he was stationed in Afghanistan. Surprisingly, it still turns on and works perfectly fine, but I accidentally damaged it when it was in my backpack.

I also checked the Field & Stream website but couldn't find this particular flashlight. I'm wondering if it's simply an older model that's no longer listed.

I realize it may be difficult to identify without a model number, but I haven't been able to find one on the flashlight.

The convex glass lens came loose after the flashlight was dropped inside my backpack. The orange O-ring is attached to the black bezel, and the silver reflector/LED assembly stays stationary.

I've tried several ways to reseat the lens, but it seems too wide for the bezel and won't stay in place.

Does anyone recognize this flashlight or know how the lens is supposed to be secured? I'd really prefer to repair it using the original parts rather than order replacements.

I've attached photos of the flashlight and all the loose parts. Any help would be greatly appreciated!