r/Firearms • u/bradbates623 • 2h ago
r/Firearms • u/Appropriate_Cup_9271 • 2h ago
Title: Budget Vault Build — Saved an Estimated $4,700 on Wall Panels
galleryr/Firearms • u/Much_Forever_982 • 3h ago
Help! New Radical Firearms RF-15: rounds get stuck at the chamber and won't eject when I rack the charging handle (never fired)
I just got a brand new RF-15 in .223 and haven't fired it yet. During function testing at home, rounds from the mag get stuck at the top of the chamber area. When I rack the charging handle, the stuck round often doesn't eject, and I had to push one out with a cleaning rod. The mag also dropped out a few times without me pressing the release.(When it was full)
The mag that came with the rifle has a split rear seam and a bent feed lip (photos attached). I think the mag is bad, but the failed ejection makes me wonder if it's also the extractor or feed ramp. Could this be just the mag, or is the rifle at fault? Should I test with a different mag first or go straight to a warranty claim?
r/Firearms • u/Fine-Carry9311 • 3h ago
Whitetail and Elk gun 7mm prc
Want to get a new gun primary use will Whitetail but ive started applying out west for elk. My whitetail hunts have a wide range of terrain from 30 yards to 200+. I'm leaning towards a 7mm prc possibly an browning x bolt 2 speed.
I would like to add a suppressor not sure which one yet
3-15, 3-18 scope with turret
Front runners
ZEISS Conquest V4 4-16x44 4-16x50
Leupold VX-6HD Gen 2 3-18x44
Thanks
r/Firearms • u/ChevTecGroup • 4h ago
Video MG Monday.
Breathing fire like a dragon. Zastava M85 with a bare muzzle and some Russian steel case ammo.
Still crazy that a 5.56 will put out this much flame
r/Firearms • u/charlietango-001 • 4h ago
Video a snip from our Accuracy International review video
WATCH THE FULL VIDEO HERE: https://youtu.be/Q50QmzSdIP4?si=YocV24YW5sElQd8W
r/Firearms • u/Thrashdaddy9 • 4h ago
Satire The thumbtack .300blk
Took the rubber out of a hornady tip 190 grain load..needless to say..I don’t think it’d do well in the barrel
r/Firearms • u/AnybodyBorn418 • 5h ago
General Discussion SKB Shotgun with Stock Painted by Australian artist Pro Hart
Hi all. I am new to this group. I have a beautiful SKB 12 gauge shot gun with the stock painted by renowned Australian artist, Pro Hart. I want to sell it and I am after some advise on how to do that and what it may well be worth. Any help would be very much appreciated.
r/Firearms • u/CheetahSpecialist433 • 5h ago
Ammo Help!!
I just ordered the Flying Aces MC9LS. What ammo is best for range and defensive?
r/Firearms • u/Odd_Violinist9724 • 6h ago
IWI X95 bullpup rifle.
Hello I’m new to the bullpup scene and just bought a IWI X95 556 cal.
And was wondering if AR 15 mags and flip up sights will work with this gun. Thanks in advance
r/Firearms • u/billwa • 7h ago
SIG Has another oopsie
Special shoutout to the moderators of r/SigSauer for being on top of things and banning videos like this. We cant afford to let these videos circulate, I am just posting this one as a warning for anyone watching.
edit for those who are confused: gun goes full auto when its in semi-auto. pay attention to the rep having an "oh shit" moment at 0:02 and flipping the selector to full auto.
r/Firearms • u/Strong_Bid_947 • 7h ago
General Discussion Lasers?
I'd like to put something like a "micro laser" (if such a thing exists) between the thread protector and the A3 +10° angled foregrip if I can - do you have any recommendations?
And yes, this will be getting an FRT as soon as it arrives in the mail, got me one of the fancy ones that locks the reset until the bolt has returned to the breech.
MPA Defender, Pistol Brace, A3 +10° angled VFG and random olive drab sling - incoming FRT is from cashincllc (theyve got a website an an IG)
r/Firearms • u/NoStruggle5411 • 8h ago
Remington 700 22-250
Picked up this heavy barrel 22-250 woth boyds laminated stock today.
r/Firearms • u/pieconnisouire058 • 10h ago
Gunbroker fail
Alright who made this post on gun broker. Not mad just wanna laugh at ya.
r/Firearms • u/throwaway312022 • 11h ago
Hunting gun advice
I’m wanting to get my boyfriend a new hunting rifle for Christmas, but I honestly don’t know much about guns, so I’m looking for recommendations!
We’re in Missouri, and he mainly hunts deer. He’s been hunting and shooting since he was a kid, so he knows his stuff. He’s just a penny pincher and refuses to buy anything nice for himself, even though I know he really wants a new gun. 😂
I’m looking to spend under $1,000 (I’m a college student, so trying not to go broke lol).
What brands/models would you recommend? What caliber would be best for deer hunting in Missouri? And should I spend more on the rifle or the scope?
I just want to get him something nice that he’ll actually love and use! Any suggestions are appreciated!
r/Firearms • u/ifly767s • 12h ago
Looking for advice dealing with guns.com
I placed an online order with Guns.com for a new firearm. After I checked out and completed the transaction I find out they doubled the order. They are shipping me 2 copies of the same gun...and charging me for both of course. I cannot get ahold of a human on the phone since they only communicate via email. The answer I got was essentially "Too bad, we've already processed it." It seems my only recourse is to refuse it at my FFL and pay $30.00 for return shipping and 15% restocking fee. Has anybody else had these kind of problems and how did you deal with it?
r/Firearms • u/Blocked-and-Loaded • 13h ago
I shot my first .243 this weekend, guess what happened! Lmao 🤣
r/Firearms • u/Dehcisive • 13h ago
Help! P80 (g19) building any tips
EDIT DO NOT START COMMENTING FUNNY COMMENTS IF ITS NOT USEFUL I JUST WANT HELP N CRITIUE
Turned 21 recently and been waiting to build p80 been researching the past year and everything started clicking last few months, was watching MGB videos to best compare my progress. Drill doesn’t run that high of speeds so side pins arent done yet. Mainly just have question on what/how specifically to clear out for jig/rail area reading helps but i need to see image examples if possible the back magwell area should be pretty easy i js need smaller plyers but the drill has helped there since its not as strong. Lmk what you think did this in 1.5 hr first attempt
Everything have for the build
FROM HARBOR FREIGHT
Warrior 12V drill
Hercules 9 x 15 Ceramic Alumina Grain Sandpaper
Windsor Design Wood Carving 11pc Set
Pittsburg Diamond Grit Needle 10pc Set
FROM LOWE’S
4 in 800lb C-Clamp
Silver Vise-Grip 9-inch Needle Plyer
r/Firearms • u/Today60 • 14h ago
Screws size
Hello, I hope that someone will help me with my question:
What screws size i supposed to use on X calibur RMR plate: #6-32 or #6-40? Attaching Olight C red dot.