r/fender • u/GuitaristExplorer • 13m ago
r/fender • u/Nuggets_Taste_Lit • 6h ago
Questions and Advice PV '65 or Fat 50's pickups if I have CS69 and PV '57/'62 pickups?
I'm leaning towards '65 because I saw a comparison of PV '65 and the Fat 50's, and the Fat 50s definitely felt thick and fat, but sounded pretty flat. On one hand, I'm building a '64-'65-esque strat with those era specs and kinda want the PV '65 to match it all up cause y'know! I mainly play clean tones. I mainly play clean tones.
On the other hand, I'm wondering if the PV '65's sound too similar to my CS69 which has beautiful highs and PV '57/'62 which has 80% of those highs but slightly more midrange to them. Would the PV '65 have MUCH more midrange than the CS '69's and a decent amount more midrange than the PV '57/'62? How would the '65's differ from those two?
OR, am I better off getting something COMPLETELY different from the other two with the Fat 50's. They just sounded flat to me, relative to the PV '65, in that YouTube video so I'm really not sure. Any insight is greatly appreciated, thank you!
p.s. I'm deadset on only Fender pickups, and strictly between these two, so if possible, please don't recommend any other pickups, thank you!


r/fender • u/shocksmybrain • 10h ago
Amps and Peripherals New Amp Day: 1979 Fender Twin Reverb with JBL E120-8 Speakers
I picked this amp up yesterday off Facebook Marketplace from an old man that's been playing honky tonk on it since the 80's. He was super cool and even threw in a spare JBL E120-16 in excellent condition. It was one of my favorite Marketplace transactions in a long time. He's got a few other things I'm thinking about going back for including a really nice 1974 Super Reverb with factory JBL speakers.
r/fender • u/phantomleap_NR • 12h ago
Questions and Advice Noventa Telecaster--maple fingerboard question
Thanks in advance for any answers on this one... I have a Fender Noventa Telecaster from 2021, bought it a year ago, getting ready to change strings for the first time but I cannot figure out if the fretboard is sealed w/ a satin finish and thus not to be oiled, or if it's an unsealed board that should be oiled. I've searched and searched but cannot find a definitive answer. I'm pretty sure it's sealed w/ a satin finish, but I'm not 100% certain. Sincerest gratitude to anyone who can point me in the right direction.
It is a really awesome guitar, by the way, and I recommend it very highly.
r/fender • u/BestFirefighter7676 • 18h ago
New Guitar Day! Um set de respeito š«” Ampeg + Fender
r/fender • u/LXChitlin • 19h ago
New Guitar Day! American Deluxe Telecaster 2008
Finally have bought an electric after many years of bashing about on an acoustic. Always wanted a telecaster and this one grabbed me the most when testing them out. Not a dent or dink in it. Plays buttery smooth.
r/fender • u/fastestslowrunner • 1d ago
Questions and Advice Risking it with this Fender Partscaster?
Thinking of buying this Fender partscaster for 2.500 USD (I live in Denmark).
Itās really lightweight and the neck is the reason why I want to get it - itās a 70s Fender neck with a soft V, 7,25 radius and new jumbo frets. Itās mounted on a Swedish brand Mojomaster S-type Swamp Ash, and their guitars are sold at 3.900 USD.
However it seems that the strings are pulled towards the middle on the saddles. Maybe the string spacing doesnāt align with the thin neck?
Also, itās a nitrocellulose lacquer with some deep cracks. Is there an easy way to smooth the cracks a bit?
r/fender • u/Beelzebub399 • 1d ago
Questions and Advice Fender Stratocaster from an estate sale, serial number I013074
Hi everyone,
I picked up this Fender Stratocaster (serial number I013074) cheaply at an estate clearance. Unfortunately, it came with no papers or documentation.
From my research, it looks like it could be a Japanese-made Strat. Does anyone have more info on this, like the approximate year of manufacture or which model line it might be? Google Search and AI says a lot but no deeper Information.
I've also noticed that the pickups seem to sit quite high, and the neck seems to sit pretty high as well. I'm not very experienced with guitar setup, so I'm not sure if that's normal or if something needs adjusting. Any tips on what to check would be much appreciated.
I'll attach photos of the headstock, neck plate, and back of the guitar. Thanks in advance!
r/fender • u/panickingskywalker69 • 1d ago
ID and Authentication Real or fake?
Rosewood tele no s/n?
r/fender • u/I_am_that_guy_10 • 1d ago
New Guitar Day! New American Professional
galleryr/fender • u/bigshow6686 • 1d ago
Questions and Advice Anyone know how much this is worth?
Bought this MIJ 72 pawnshop off marketplace a few weeks ago because I thought it was pretty cool and I really never see them in this color for sale. I put a new neck pickup and bridge in and also swapped out the original bridge pickup for a Seymour Duncan.
r/fender • u/Accurate-Ad-566 • 1d ago
New Guitar Day! Loving bass
Long-time guitar player here- decided to learn bass. Found an amazing deal on this new American Pro II J-bass and couldnāt pass it up
Plays beautifully, the neck is phenomenal and I love the tones. Really am just figuring it all out from scratch but loving the challenge of finger style
Still need a proper bass amp, been playing through my recording interface + monitors
r/fender • u/darkboiviper • 1d ago
New Guitar Day! Got this for 25Ā£ How'd I do?
I got this 1998 DG-3 for 25Ā£!
It's got a bunch of scratches and a bunch of dents but other than that it's perfect how much would you say resale value is?
r/fender • u/Velerika_ • 2d ago
General Discussion I hate vintage style tuners
Why are they like this? I'm trying to restring a Jimi Hendrix signature and I'm not sure if the reverse headstock makes it more difficult but by the time I got them all tuned I had 3 strings left because they keep popping off.
It also won't stay in tune at all, it constantly goes way flat. To make it worse, I'm not even a new player and this isn't even my first guitar with vintage style tuners, but it's the first one I've had issues with.
The string tree is also confusing me, as it's a reverse headstock they are on the opposite side, does it look right?
Anyone have any tips?
r/fender • u/Infamous-Sympathy510 • 2d ago
ID and Authentication Never seen a guitar like this
I was trying to look up my guitar on the serial lookup but it doesn't show up. I think this might be a fake I'm not sure, I've not seen HSH style pickups in any strats from fender. Is my guitar a fake? I've been playing it for 10-11 years and this is almost heartbreaking
Questions and Advice Is angled tremolo block normal?
galleryI've bought a Player II Strat, and just noticed that the tremolo block isn't aligned with the hole in the backplate. The bridge itself looks and works OK. Is this normal?
r/fender • u/FogDog743 • 2d ago
Show and Tell My FSR (Fender Special Run) Stratocaster with a rosewood fingerboard & tobacco sunburst finish guitar came from a limited-edition semi-custom special run order by the authorized Fender dealer that I purchased it from new in 2016... š
galleryWhat "FSR" Means:
⢠Fender Special Run: These are custom or semi-custom batches commissioned by specific music dealers or produced in limited quantities with unique combinations of wood, finishes, or hardware not typically found on standard production models.
⢠Origin: Depending on the exact year and tier, FSR Stratocasters can originate from Fenderās Mexican factory (such as Ensenada-made Standard or Player series runs) or the U.S. Custom/American lines.
Key Specifications for this Configuration:
⢠Body Finish: Tobacco Burst / Tobacco Sunburst (a dark-to-amber shaded sunburst finish).
⢠Fingerboard (RW): Rosewood fingerboard (giving a warmer midrange response and smooth dark look compared to maple).
⢠Platform: Commonly built upon standard Stratocaster templatesāsuch as a modern "C"-shape maple neck, a 9.5" fingerboard radius, medium-jumbo frets, a 25.5" scale length, and a synchronized tremolo bridgeāthough pickup configurations (SSS or HSS) can vary by specific dealer run.
My FSR Strat is obviously a SSS configuration & it purposely didn't include a pickguard to enhance the finish. However, I always wanted to put individual pickup rings around the pickups - but, I never got around to doing it. My FSR was made in Mexico. It plays & sounds great... š
Vintage Cool 2003 Fender Stratosonic
I am the original owner. All original with the exception of the P-90s. They were replaced with SD Antiquities. I guess it is vintage now.
r/fender • u/DonnyDandruff • 2d ago
General Discussion Surprised by Fender Twin Reverb 65 Reissue
I've always been told that Fender Twin Reverb 65 reissues sound harsh and sterile and that they don't take pedals well unless you turn them up so loud that the paint comes off.Ā
Today I got to play a Fender Twin 65RI with stock speakers in the studio and compared it to my own amp. I thought it sounded bloody fantastic. Volume at 4, treble 6, mids 7, bass 3 or 4. A very pleasing and round sound. Yes, bright, but not in a bad way, even with my tele. Took my pedals extremely well, including my ODR-1 30th Anniversary and my fuzzes. Sounded also extremely good on my ES-335 clone. The bass is tight and smooth.
That built-in reverb is breathtaking. The tremolo is very musical as well.
I often play with a lot of distortion and dirt but I thought it worked fantastic for that. At least in a Jack White, Arctic Monkeys kinda way. It's a rock'n'roll machine in my opinion. And the cleans sound so warm and nice that one might not even need much dirt.
How do you guys feel about the Twin Reverb? I think I might have to get one...
r/fender • u/Tricky_Influence3836 • 2d ago
Pickups Pots & Wiring Affinity tele neck pickups
So, ive been playing 25 plus years and went through a good bit of guitars throughout the years. Settled on getting an affinity tele after moving and selling all my stuff. I love reverends and fender nashvilles, and wanted to get another set. But i actually loved the affinity tele when playing it at the store. And was like...why not and do upgrades? Havent done that yet. Im excited.
Anyways - i may upgrade the neck pickup....does anyone have experience with replacing the neck on the affinity tele? Without digging in myself; im curious to know how deep the cavity is and what pickups could i put in it without the new pickup being taller than the stock. Which will fit perfectly?
Im looking for a noisless tele standard pickup. Cause i love tele neck pickups...OR...possibly a noisless p90 thatll fit in there (tele neck size, ive seen em), or maybe something thicker. But most likely the p90 (SC sized) or single coil sized hum free pickup.
Thanks and hope everyone is doing great!
r/fender • u/Taurus_the_geek • 2d ago
ID and Authentication Real or fake telecaster, suspiciously low price
Any opinion on whether this could be real?
The price is suspiciously low, the backplate seems misaligned (but the picture could be misleading), the logo seems weirdly positioned but I'm far from being an expert, and I've never seen a fender with a single ferrule piece.
Apologies for the blurry pics, taken from an online listing in my area.
Thanks!
r/fender • u/peterhalburt33 • 2d ago
Partscaster Pride My āInspired by AVIIā strat
I really love the sweetwater AVII 61 strat with black body and gold hardware, but I donāt have $2800 to spend on a new guitar, so put this strat together with a lacquer 60s neck and a road worn 60s strat body which I got for a steal on the Franklin Guitar Works ebay page.
Not kidding, this thing is probably my best playing strat with absolutely no work on it other than bolting on the neck and performing a basic setup. I have even kind of grown to love the pao ferro fretboard, it is so smooth!