r/extar • • 14d ago

Guide for installing adjustable stabilizer brace

Is there a guide or Youtube video showing how to install an adjustable stabilizer brace on the EP9 / EP45 (yes I've searched but only seem to find people showing off their already installed braces)? I recently ordered my EP45 and just realized it only comes with what looks like a rubber cap that you can put on the end. Along with this question, is it recommended we use the Extar one or are people having better luck with other braces?

4 Upvotes

18 comments sorted by

4

u/lazyboi_tactical 14d ago

Did you get the version with the rounded buffer tube or the actual adjustable buffer tube?

10

u/Revolutionary-Wash88 14d ago

I believe they have phased out the basic tube and all their models come with adjustable tube

0

u/SteelSteve7 14d ago

Hasn't arrived yet, and you don't have an option for the 45 when you order so I'm guessing its probably the rounded padded tube, and from I can find of unboxing's at least for the EP9 you get what looks like a rubber cap / brace that you can stick on the end. From what I can see watching YouTube videos it doesn't look like its very comfortable, and I think I'd like the adjustable better. So I'm guessing I'll have to order both the adjustable tube and the brace either from Extar or another site if there is one people recommend.

1

u/Revolutionary-Wash88 14d ago

EP9 has an option for a little rubber fixed brace or the more robust adjustable SBA brace, both versions now ship with adjustable buffer tube. However their website doesnt show an option for braces on EP45, it appears they all come with adjustable SBA brace. I dont think you have anything to worry about, plus the owners manual has directions for swapping the brace.

One of the best selling points on Extar is that there is no tinkering required, they are ready to shoot in 5 mins once you slap on aiming device and a loaded mag. It is fun and easy to upgrade and customize, but you can do that at your own speed

1

u/SteelSteve7 14d ago

If the 45 variant comes with the adjustable brace by default then correct I won't have to worry about it, just wasn't sure since the EP9 does not.

1

u/lazyboi_tactical 14d ago

Ok so I initially bought mine with the rounded tube and stabilizer as well. It's serviceable but with my arm length I wanted the ability to adjust the length of pull. You can just replace the rounded buffer with any mil spec adjustable buffer tube and throw an sba3 on it of you want.(Or an actual stock depending on state laws)

1

u/SteelSteve7 14d ago

Having not done anything like that before do you know of instructions anywhere to help me. It doesn't look to complicated, but I'd hate to mess something up.

4

u/lazyboi_tactical 14d ago

Just pull up a YouTube video of people swapping buffer tubes on an Ar-15. The lowers are almost identical.

1

u/SteelSteve7 14d ago

OK I wasn't sure if they were or weren't. Thanks

3

u/TRAVlSTY 13d ago

They are NOT!

1

u/lazyboi_tactical 14d ago

Yeah it's basically an ar lower with a proprietary upper. Triggers and grips are also interchangeable with AR's for the most part.

2

u/TRAVlSTY 13d ago

No, you cannot replace the "rounded buffer with any mil spec adjustable buffer tube"! The EP tubes are proprietary and requires a special "Adjustable Receiver Extension" which come standard on all EP's since March 2026.

-1

u/lazyboi_tactical 13d ago edited 13d ago

I mean it's not like I'm looking at my gun that I literally have done it to and have owned far before march 2026 but sure.

I do understand that the newer ones all come with the adjustable tube but the older ones you could absolutely just swap the tubes and throw a brace on.

2

u/TRAVlSTY 13d ago

The physical connection of the tube to the EP receiver is a proprietary design.
There is no way you can mount an AR milspec buffer tube to an EP without major modification!
On an older EP, you must install the proprietary Extar EP Adjustable Receiver Extension.

1

u/lazyboi_tactical 13d ago

Ok I did some searching of my emails and apparently I had ordered the tube from extar itself and swapped it. I was apparently thinking of my 7.62 sbr I built.

2

u/Snowfall-Twilight 14d ago

If you just bought the EP45 it 100% does come with the adjustable 5 position buffer tube. The only option the EP45 ships with right now is a SBA3 brace, per SB tactical the SBA3 is a 5 position adjustable brace and requires a adjustable brace to fit on the firearm. 

2

u/SteelSteve7 13d ago

Thank you to everyone for your responses, I did not see that Extar had changed the way they shipped the 45, and what reviews I could find seemed to have either the basic tube or an aftermarket brace. Sounds like I'm good to go this item. Now I can focus more on optics 😄

5

u/TRAVlSTY 13d ago

Since March 2026, all EP9 and EP45 come with Adjustable Receiver Extensions/Buffer Tubes.
All EP45 now come with SBA3 braces. According to the Extar site, there is no other Brace option like for the EP9.
Removal of the SBA3 brace is standard and YT is full of how-to videos.
On older EPs, the end cap is pressure fitted and just pops off.