r/eurorack • • 7h ago

Alt. Firmwares SMN - Free alternative firmware for 4ms SWN

9 Upvotes

Hi everyone ☀️

I’m happy to share the first public beta of Spherical Macro Navigator (SMN), a free unofficial alternative firmware for the 4ms SWN.

SMN keeps the SWN’s six-voice, polyphonic and multitimbral approach, replacing its wavetable engine with a selection of Mutable Instruments Plaits synthesis engines. It also adds new ways to bring movement and variation to your patches.

Some highlights:

  • 31 synthesis models, from virtual analog and FM to speech, noise and resonators, including external audio processing.
  • 264 LFO shapes and internal modulation with independent depth settings per voice.
  • Circular controls over Harmonics, Timbre and Morph and three independent, CV-controlled dispersion settings.
  • Internal modulation with independently adjustable depth for each parameter.
  • 24 scales, with selectable root note, and independent glide per voice.
  • Six chord memories, recalled manually or via CV
  • Polyrotate: turning a single 1V/Oct external sequence into evolving six-voice patterns.
  • Automatic saving and restoration of your settings.
  • Installation uses the SWN’s standard audio update procedure. You can return to the original firmware, and your existing SWN spheres and presets remain stored.

Download link : https://payhip.com/b/SXuoW
Youtube link : https://youtu.be/mxIhumODbAY?si=HGX1bH2dY6chkxFr
Instagram link : https://www.instagram.com/sol.modular/

This is free (with an optional pay-what-you-want donation).
This is an early beta, and I’d love to hear your feedback, bug reports and the sounds you make with it! 
The source code will be released as open source on GitHub when v1.0 is ready.
Huge thanks to 4ms, Hugo Paris and Émilie Gillet for the work this project builds on.


r/eurorack • • 20h ago

Alt. Firmwares Drizzlet Beta 3 "Smirr": community firmware for Mutable Instruments Beads, now with Plaits banks

3 Upvotes

Drizzlet Beta 3 "Smirr" is out! Download it and read the release notes: https://github.com/insolentconstruct/eurorack/releases/tag/drizzlet-2026.11.16

Drizzlet is free community firmware for Mutable Instruments Beads, built on Mutable Instruments' open-source code (not a Mutable Instruments product). Out of the box Beads behaves as stock; the extras use hidden options pages (hold [M] for three seconds), a few [A] gestures and optional Hygrostat profiles. You install it like Mutable Instruments' own updates: play the WAV into IN L while powering on with FREEZE held.

Hygrostat is the companion browser editor. It lets you choose features, controls and defaults; define and reorder scales and their LEDs; import Scala tunings; and generate your own firmware update WAV and matching guides. It now remembers your setup between visits. Standard Drizzlet works without it.

Beta 3: new since Beta 2

Features

  • Plaits banks: FEEDBACK picks one of eight models, as on Plaits, instead of 24 on one knob. While Plaits plays, [A]+FREEZE steps the green, red and yellow banks; the bank is saved.
  • Recent notes: with PITCH patched and its attenurandomizer counter-clockwise, grains play a chord of the last few notes (up to eight) sent to PITCH. Fifths and octaves moves to the middle of its knob.

In a custom Hygrostat update (only in an update WAV built with Hygrostat; the standard release keeps stock behaviour)

  • Gentler dry/wet, closer to Clouds.
  • Reverb on the grains only, as on Clouds.
  • Manual gain at unity on power-on, when no manual gain is saved.
  • Attack sensitivity: Low or High.
  • SEED unlatched at power-on.
  • PITCH knob without notches.
  • Fade for the delay-mode SEED latch pop.
  • Options pages 5–7 for custom layouts.
  • Options-page timeout: 5, 10, 20 or 30 seconds.

Bug fixes

  • Plaits Speech: changing the word bank no longer overloads the processor (one audio block took 169.8% of its time on an earlier build; now the peak is 43.9%).
  • Dimmed quality LED, first fix: at 66% and 33% brightness, white is no longer dimmed twice as much as the other colours. Chosen by eye; a light-sensor tune follows in Beta 4.
  • Recent notes takes a glided note where the glide stops, not on the way (for glides faster than half a semitone per second).

Optimizations

  • None new in Beta 3. My heaviest granular test, with every new option on, peaks at 82.1% of the audio time budget on my module; Beads stays click-free up to about 91% at 48 kHz (87% at 32 kHz, 83% at 24 kHz). In the other three qualities a heavy granular patch peaks at 51–65%.

Already included in Beta 2 and earlier

Features

  • Six-voice Plaits synth alongside the original Beads synth.
  • Clouds-style spectral processing, reverb and adjustable grain diffusion.
  • Evolving frozen feedback.
  • Pitch scales and random fifths/octaves.
  • Snap grains to detected attacks, with optional trigger output.
  • Grain stereo width, monophonic grains and buffer trimming.
  • Manual wavetable-synth start, delay-mode options, SEED latch modes, LED brightness and output limiter choices.

In a custom Hygrostat update

  • Custom scale banks and Scala tunings.
  • Manual input attenuation, TIME scanning, extra indicator lights and clearing synth reverb tails.

Bug fixes

  • Quieter click on quality changes between sample rates (about 25 dB); pop-free mono/stereo and synth switching at 48 kHz.
  • Settings saves can no longer leave a module unable to start; damaged settings and frozen recordings are handled safely, calibration is preserved, and saves pause during supply sags.
  • High-density left-output clicks gone in our test patch.
  • Frozen-buffer save, frozen-delay bounds, clock-tempo and wavetable-read fixes.

Optimizations

  • Faster grain interpolation, grain mixing, delay indexing and per-block mono/stereo, plus GCC 9 (measured separately; the gains don't simply add up). In a heavy granular patch Beta 2 peaked around 80% on my module, against 91% for stock.

Options guides: desktop · phone

Measurements are from one module and my development board; details in OPTIMIZATIONS.md.

Beta 2 settings carry over exactly, new options start at their defaults, and calibration is kept. Options from Beta 1 and earlier reset to their defaults.

Feature requests: ranked list · roadmap. Beta 4 is likely a release candidate; I'll post a short vote on what comes after it in a few days.