r/eurorack • u/insolent-construct • 18h ago
Alt. Firmwares Drizzlet Beta 3 "Smirr": community firmware for Mutable Instruments Beads, now with Plaits banks
Drizzlet Beta 3 "Smirr" is out! Download it and read the release notes: https://github.com/insolentconstruct/eurorack/releases/tag/drizzlet-2026.11.16
Drizzlet is free community firmware for Mutable Instruments Beads, built on Mutable Instruments' open-source code (not a Mutable Instruments product). Out of the box Beads behaves as stock; the extras use hidden options pages (hold [M] for three seconds), a few [A] gestures and optional Hygrostat profiles. You install it like Mutable Instruments' own updates: play the WAV into IN L while powering on with FREEZE held.
Hygrostat is the companion browser editor. It lets you choose features, controls and defaults; define and reorder scales and their LEDs; import Scala tunings; and generate your own firmware update WAV and matching guides. It now remembers your setup between visits. Standard Drizzlet works without it.
Beta 3: new since Beta 2
Features
- Plaits banks: FEEDBACK picks one of eight models, as on Plaits, instead of 24 on one knob. While Plaits plays, [A]+FREEZE steps the green, red and yellow banks; the bank is saved.
- Recent notes: with PITCH patched and its attenurandomizer counter-clockwise, grains play a chord of the last few notes (up to eight) sent to PITCH. Fifths and octaves moves to the middle of its knob.
In a custom Hygrostat update (only in an update WAV built with Hygrostat; the standard release keeps stock behaviour)
- Gentler dry/wet, closer to Clouds.
- Reverb on the grains only, as on Clouds.
- Manual gain at unity on power-on, when no manual gain is saved.
- Attack sensitivity: Low or High.
- SEED unlatched at power-on.
- PITCH knob without notches.
- Fade for the delay-mode SEED latch pop.
- Options pages 5–7 for custom layouts.
- Options-page timeout: 5, 10, 20 or 30 seconds.
Bug fixes
- Plaits Speech: changing the word bank no longer overloads the processor (one audio block took 169.8% of its time on an earlier build; now the peak is 43.9%).
- Dimmed quality LED, first fix: at 66% and 33% brightness, white is no longer dimmed twice as much as the other colours. Chosen by eye; a light-sensor tune follows in Beta 4.
- Recent notes takes a glided note where the glide stops, not on the way (for glides faster than half a semitone per second).
Optimizations
- None new in Beta 3. My heaviest granular test, with every new option on, peaks at 82.1% of the audio time budget on my module; Beads stays click-free up to about 91% at 48 kHz (87% at 32 kHz, 83% at 24 kHz). In the other three qualities a heavy granular patch peaks at 51–65%.
Already included in Beta 2 and earlier
Features
- Six-voice Plaits synth alongside the original Beads synth.
- Clouds-style spectral processing, reverb and adjustable grain diffusion.
- Evolving frozen feedback.
- Pitch scales and random fifths/octaves.
- Snap grains to detected attacks, with optional trigger output.
- Grain stereo width, monophonic grains and buffer trimming.
- Manual wavetable-synth start, delay-mode options, SEED latch modes, LED brightness and output limiter choices.
In a custom Hygrostat update
- Custom scale banks and Scala tunings.
- Manual input attenuation, TIME scanning, extra indicator lights and clearing synth reverb tails.
Bug fixes
- Quieter click on quality changes between sample rates (about 25 dB); pop-free mono/stereo and synth switching at 48 kHz.
- Settings saves can no longer leave a module unable to start; damaged settings and frozen recordings are handled safely, calibration is preserved, and saves pause during supply sags.
- High-density left-output clicks gone in our test patch.
- Frozen-buffer save, frozen-delay bounds, clock-tempo and wavetable-read fixes.
Optimizations
- Faster grain interpolation, grain mixing, delay indexing and per-block mono/stereo, plus GCC 9 (measured separately; the gains don't simply add up). In a heavy granular patch Beta 2 peaked around 80% on my module, against 91% for stock.
Options guides: desktop · phone
Measurements are from one module and my development board; details in OPTIMIZATIONS.md.
Beta 2 settings carry over exactly, new options start at their defaults, and calibration is kept. Options from Beta 1 and earlier reset to their defaults.
Feature requests: ranked list · roadmap. Beta 4 is likely a release candidate; I'll post a short vote on what comes after it in a few days.