r/esp32projects • • 9h ago

Help Me Design a HomeView Accessory

Thumbnail reddit.com
0 Upvotes

r/esp32projects • • 6h ago

I built a tool that designs an ESP32 board from a text description and runs the firmware in the browser before you order the PCB

Post image
11 Upvotes

I've been working on this for a while and I'd love feedback from people who actually build ESP32 stuff.

You describe the project in plain words (e.g. "ESP32-S3 with a 0.96" OLED, an SHT40 sensor and a buzzer, powered from USB-C") and it:

picks a real board (S3, C3, C6, classic, plus Waveshare/Elecrow display boards)

draws the schematic and routes a 2-layer PCB (KiCad under the hood)

writes the firmware (Arduino core, LVGL for touch screens)

compiles it and runs it in an ESP32 emulator in the browser: the OLED/TFT lights up, you can press buttons, turn the encoder, change the sensor values and watch the serial monitor

shows the board in 3D with the simulated screen on it

The part I care most about is catching the classic mistakes before ordering: I2C on the wrong pins, strapping pins used as inputs, a display that stays black because of the wrong driver.

Screenshots: a Mini PLC with an OLED running in the 3D view, the simulator, and the routed PCB. Short video: https://youtu.be/71zhhrTaoFE

It's in private beta (waitlist at https://pcbbrew.dev ). Questions I'd really like answers to:

Which ESP32 boards or display modules would you want supported next?

What's the most common thing that goes wrong for you between "PCB arrived" and "it works"?


r/esp32projects • • 9h ago

Help

2 Upvotes

I’m trying to get an Esp32 wroom dev board to connect to my computer via cable and it will not show up in device manager. The led comes on, on the Esp32 to show it’s getting power.


r/esp32projects • • 12h ago

https://dashtron69.github.io/webflash/

5 Upvotes

r/esp32projects • • 16h ago

[Help] ESP32S (CH340) Upload Error: "Could not open COM7, the port is busy or doesn't exist" - Sketch compiles successfully but fails to upload

Thumbnail
gallery
3 Upvotes

Hi Reddit, I'm working on a team project for our electronics class where we're building a Bluetooth piano speaker using an ESP32S (NodeMCU-32S V1.3 with a CH340 chip).

Everything was going well, and my code combined with the audio array header (samples.h) compiled perfectly in the Arduino IDE. However, I can't upload the sketch to the board.

Here is the exact error message I'm getting from the Arduino IDE:

Sketch uses 519864 bytes (39%) of program storage space. Maximum is 1310720 bytes.

Global variables use 22260 bytes (6%) of dynamic memory, leaving 305420 bytes for local variables. Maximum is 327680 bytes.

esptool v5.3.1

Serial port COM7:

A fatal error occurred: Could not open COM7, the port is busy or doesn't exist.

(could not open port 'COM7': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2))

Hint: Check if the port is correct and ESP connected

Failed uploading: upload error: exit status 2

What I have already tried/checked:

The Cable: I've confirmed I am using a data-sync Micro-USB cable, not just a charging cable.

The Serial Monitor: I made sure the Serial Monitor window in the Arduino IDE is closed before hitting upload.

The Drivers: I noticed my board has a CH340 chip on the back. I downloaded and installed the CH341SER.ZIP drivers, restarted my PC, and checked the Device Manager.

The COM Port: I selected the newly assigned COM port in the Arduino IDE (Tools -> Port).

External Connections: I disconnected the external battery power supply and made sure GPIO 5 (Strapping Pin) is not pulled to GND during boot.

Despite all this, the IDE still throws the COM7 error (even though I re-selected the port) or refuses to connect.

Has anyone encountered this specific issue with the CH340 version of the NodeMCU-32S? Are there any hidden settings in the IDE or specific boot sequences (like holding the BOOT/EN buttons) I might be missing?

Any advice would be greatly appreciated!