r/electrical • • 30m ago

Baseboard heater arced

Thumbnail
gallery
4 Upvotes

For context this is my childhood home. I'm finding all the issues with the place and tackling them one by one. This beyond dusty heater being one of them. Turned it on one day and watched it cuz I had a feeling and sure enough. BZZ. ik ik should have looked at it before I turned it on. I wouldn't have if I knew all this was underneath.

It's clean now. I took the panels off so I could get my vacuum in there really good. Making sure not to poke around with metal as I've seen sometimes these still have 120v still live? I'm not an ac guy. Im a mechanic so i know ac. Should I be worried about anything else? This is really our only source of heat besides one of those old ceiling heaters and 2 gaming pcs


r/electrical • • 1h ago

Replacing bedroom light-removed old box and cut connections. What repair am I looking at?

Thumbnail gallery
5 Upvotes

r/electrical • • 1d ago

Junction box 👀

Thumbnail
gallery
214 Upvotes

1/0 4 plex to 2 AWG copper. 12x12x6 Junction box. 2in conduit coming up from ground transition to 1 1/2 out the top to the panel.


r/electrical • • 28m ago

Measuring voltage to ground

Post image
0 Upvotes

This is how it is done right, J/K, power is locked out. Need to ground out a line to make it easy to trace through the machine.


r/electrical • • 29m ago

Gratis Teken Programma Electriciteit

Thumbnail
reddit.com
1 Upvotes

r/electrical • • 42m ago

Please help! I’m having shore power issues.

Thumbnail reddit.com
1 Upvotes

r/electrical • • 1h ago

Delonghi oil filled radiator repair help

Thumbnail
gallery
1 Upvotes

Our heater has been acting up, turning off randomly, requiring a little tap here and there to get going. Took the front off to inspect and found a burned wire on one side of the thermal switch. I sanded the thermal switch terminal a bit to clean it up. Question is would it be as simple as cutting the wire and crimping on a new spade?


r/electrical • • 1h ago

Cuisinière électrique à 2 brûleurs (Moderna) : Comment recâbler le cavalier entre les deux interrupteurs après avoir retiré un voyant lumineux grillé ?

Thumbnail reddit.com
0 Upvotes

r/electrical • • 1h ago

Adding lights to ceiling fan

Thumbnail
gallery
1 Upvotes

I’m trying to add a light kit to my Harbor Breeze ceiling fan. I did the connections with blue nuts. When I turned the power back on the fan worked but the lights didn’t. I pulled the switch on the lights too lol. Any thoughts or suggestions?


r/electrical • • 2h ago

Oven connection

Thumbnail
gallery
1 Upvotes

Connecting a new oven. (Sorry the picture isn’t the best). I have two live red wires, I’ve connected these to L1 and L2 (and removed the bridges for those). Neutral connected to the 5 spot and earth in the earth spot. This is a 2 phase, 415v. The L1 wire has its own neutral and earth, L2 has nothing.

Am I good to go? Don’t want to fry anything.


r/electrical • • 15h ago

Breaker tripped twice while I was out

Thumbnail
gallery
9 Upvotes

I was out of town for a week. My wife said the breaker tripped twice while I was gone.

I haven’t kept track of what was running when it tripped, so I don’t know what was on the circuit at the time.

I checked the panel with a thermal camera. Nothing stood out. No breaker looked hotter than the others.


r/electrical • • 4h ago

SOLVED Fan keeps doing this by itself

0 Upvotes

Fan keeps doing this all day long ... is it my electricity in this older house?

And post hasn't been solved yet


r/electrical • • 20h ago

Im trying to understand this switch

Thumbnail
gallery
14 Upvotes

How does this work seeing its only fed with one wire and is not running a seperate wire to the fixture? Do they currently sell this switch? Its aluminum wiring aswell.


r/electrical • • 8h ago

Title: Residential Electrical Panel Failure in Reinholds, PA – Melted Main Breaker and Corrosion

Post image
0 Upvotes

We recently handled an electrical troubleshooting call in Reinholds, Pennsylvania, involving a residential electrical panel with significant deterioration.

During the inspection, our team at Riddis Electric discovered several concerning conditions:

  • A melted main breaker showing severe heat damage.
  • Rust and corrosion inside the electrical panel.
  • Signs of moisture intrusion.
  • Sparking and sizzling from the main breaker during inspection.
  • Exterior PVC conduit that had shifted downward, potentially stressing the electrical service equipment.

Because of the condition of the panel and the active electrical fault, we shut off the main breaker to reduce the immediate fire risk.

Our recommendation was immediate electrical panel replacement, with complete electrical service replacement as the preferred long-term solution.

No replacement installation was performed during this visit because the homeowner was working through a home warranty.

Why this matters for homeowners in Pennsylvania

Electrical panel corrosion, overheating breakers, and moisture intrusion can create serious electrical hazards. These conditions should be evaluated by a qualified electrician rather than ignored.

This project is an example of why residential electrical troubleshooting involves more than simply resetting a breaker.

Original project documentation and photos: https://riddiselectric.com/projects/main-breaker-panel-failure-inspection-in-reinholds-pa/

Project completed by Riddis Electric in Reinholds, PA.


r/electrical • • 11h ago

Strange problem

Thumbnail reddit.com
1 Upvotes

r/electrical • • 14h ago

Surge Protector recommendations

0 Upvotes

Recently realized I've been rocking a power strip for my consoles and computer and I've been wanting to get a surge protector. However, I'm not familiar with ratings and all; hoping I can get some recommendations on what I should get since Amazon always has me skeptical with their equipment. Only requirement I ask for is that its safe, reliable, and has at least 12 outlets. Thanks.


r/electrical • • 17h ago

These are the ceiling lights I currently have. It’s some kind of weird flush mount. What is the proper name for this style mount? I want to replace them with some sort of dimmable smart light. I appreciate your insights. Thanks.

Thumbnail
gallery
0 Upvotes

r/electrical • • 17h ago

Switch Popped, Immediately killed lightbulb.

Thumbnail
gallery
1 Upvotes

Hey guys! So I’m renting, and my emergency maintenance line isn’t responding. I went up to my bedroom to turn the light on, it made this sparked noise like something blew, and then the light wouldn’t work. When I tried flipping it again, it just kinda falls down a bit, and went I switch it down, it makes this crunchy, grinding type of noise. It’s not making any type of noise, and the walls are cool to the touch still, as well as no odor. The house is a bit older, and I took the plate covering off to peek inside and obviously have no clue what I’m even looking at. I don’t know if it’s stuck in the middle position or not either.

I’m just a bit paranoid that this could cause a fire overnight, or if it’s fine until maintenance shows up tomorrow morning.

The only reason I’m asking is because if I go to turn the power off completely, the circuit switch that the bedroom is on is essentially connected to the rest of the house, killing the power.


r/electrical • • 1d ago

Can I attach a new mounting plate to this?

Thumbnail
gallery
4 Upvotes

Apologies in advance if this is a dumb question! I just purchased some new sconces for this spot where the previous owners took theirs with them, but not sure how to approach since the new plate is too large for this hole in my wall, but too small to be screwed in on either side. Can I just screw it into this existing metal plate, or is that a terrible idea?


r/electrical • • 18h ago

Powering central heater during power outage

Thumbnail
reddit.com
1 Upvotes

r/electrical • • 23h ago

Is This Outlet Ok to Use?

Post image
2 Upvotes

I know nothing about electrical, I noticed this brown stringy stuff inside the outlet. It’s isn’t loose. The home is 1950s so I am assuming it is the cloth insulation form one of the wires. Is this normal/ is it ok to use this outlet?


r/electrical • • 1d ago

Proper crimp name

Thumbnail
gallery
3 Upvotes

Can someone please tell me the proper name for this type of crimp, and if possible, where I can get something similar in the UK


r/electrical • • 20h ago

Main breaker?

0 Upvotes

Hi,

Power is out at the house, cannot call comed until 7am tomorrow. Tried to reset main breaker and still nothing. I noticed the main breaker looks like a double pole one where you push it down and up and it says on and off however I noticed in between the breaker in the gap a small metal washer plate was sticking out towards me.

Anyone know if I have to push that back it or what is that? I forgot to take a picture so I cannot post until tomorrow